-
audio-technica Audio-Technica-AT-VM95ML
Audio-Technica AT-VM95ML is a VM95-series dual moving magnet cartridge with a nude MicroLinear stylus.Its precise line-contact profile delivers excellent groove tracing, extended detail, and reduced inner-groove distortion.Why it stands outNude MicroLinearPrecise tracking and reduced inner-groove distortion through a profile selected for accurate groove contact.VM95 Interchangeable Stylus PlatformSupports all six VM95-series replacement stylus assemblies for maintenance or future upgrades.Threaded Cartridge BodySimplifies installation on compatible 1/2-inch-mount headshells.Dual Moving Magnet DesignMirrors the cutter-head geometry for stable stereo separation and dependable playback.Best for Precise tracking and reduced inner-groove distortion Compatible 1/2-inch-mount turntables Users comfortable with cartridge alignment MM phono systems Not ideal for P-mount turntables Users wanting a pre-mounted headshell assembly Systems without an MM phono input or external MM phono stage EMiUZEK Buying Notes AT-VM95ML is a cartridge only; a headshell is not included. It requires installation and alignment on a compatible 1/2-inch mounting system. Use an MM phono input and set tracking force to 1.8–2.2 g, with 2.0 g standard. FAQDoes it include a headshell?No. A compatible headshell or tonearm mount is required.Will it fit every turntable?No. Verify 1/2-inch mounting and tonearm compatibility; it is not a P-mount product.What phono stage does it require?Use an MM-compatible phono input with 47 kΩ load impedance and 100–200 pF load capacitance.What is the tracking force?1.8–2.2 g, with 2.0 g standard.Can the stylus be replaced?Yes. The VM95 body accepts all six VM95-series replacement stylus assemblies.Is final setup still required?Yes. Cartridge alignment, overhang, tracking force, and anti-skate must be set correctly.HOW TO CONNECTStandard Turntable SetupSource icon: deviceSource: Vinyl RecordConnection: Stylus / GrooveOutput connection: Cartridge PinsTarget icon: deviceOutput: MM Phono InputNote: Install and align the cartridge on a compatible 1/2-inch mount, then verify overhang, tracking force, and anti-skate.Technical SpecificationsCartridge and Stylus Type: VM dual moving magnet stereo cartridge Frequency Response: 20–25,000 Hz Output Voltage: 3.5 mV at 1 kHz, 5 cm/s Channel Separation: 23 dB at 1 kHz Output Balance: 1.5 dB at 1 kHz Stylus: Nude MicroLinear Cantilever: Aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Electrical and Physical Recommended Load: 47 kΩ / 100–200 pF Cartridge Weight: 6.1 g Cartridge Dimensions: 17.2 × 18.9 × 28.3 mm Mounting: 1/2-inch compatible Recommended System Setup Setup Connection Integrated Amplifier Turntable → MM Phono Input → Amplifier → Speakers External Phono Stage Turntable → MM Phono Stage → Line Input → Amplifier → Speakers What's in the boxAT-VM95ML cartridgeDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/downloadAdditional Product ContentAudio-Technica VM95 Series Comparison Feature AT-VM95E AT-VM95EN AT-VM95ML AT-VM95SH Stylus Bonded elliptical Nude elliptical Nude MicroLinear Nude Shibata Frequency Response 20–22,000 Hz 20–23,000 Hz 20–25,000 Hz 20–25,000 Hz Best Use Accessible everyday playback Balanced detail upgrade Precise tracking and low inner-groove distortion Rich detail and extended groove contact
$182.19
-
audio-technica Audio-Technica-AT-VM520XEB/H
Audio-Technica AT-VM520xEB/H combines an AT-VM520xEB dual moving magnet cartridge with a bonded elliptical stylus, pre-mounted on an AT-LT10 universal headshell.It offers a convenient upgrade for compatible detachable-headshell tonearms, with factory assembly reducing installation work while retaining adjustable cartridge positioning. Why it stands outPre-Mounted Cartridge and HeadshellCombines the cartridge and AT-LT10 headshell in one assembled package for faster installation on compatible tonearms.Bonded Elliptical StylusProvides more precise groove contact than a conical stylus for balanced detail and dependable everyday vinyl playback.Adjustable AT-LT10 HeadshellElongated through-holes allow cartridge positioning and overhang adjustment for correct turntable setup.Interchangeable AT-VMx Stylus SystemSupports compatible stereo AT-VMx replacement styli for maintenance or a future stylus-profile upgrade. Best for Compatible turntables with a detachable universal headshell Users wanting a pre-mounted cartridge upgrade Everyday stereo vinyl listening Systems using an MM phono input Not ideal for Turntables with a fixed headshell or incompatible tonearm connector P-mount turntables Systems without an MM-compatible phono input or external MM phono stage Users whose tonearm cannot accommodate the 18.3 g cartridge-and-headshell assembly EMiUZEK Buying Notes AT-VM520xEB/H includes the AT-VM520xEB cartridge pre-mounted on an AT-LT10 universal headshell; it is not the cartridge-only AT-VM520xEB package. Verify tonearm connector compatibility, assembly weight, overhang, alignment, and tracking-force adjustment before purchase. It requires an MM phono input or external MM phono preamplifier and cannot be connected directly to a standard amplifier line input. FAQIs the cartridge already mounted on the headshell?Yes. The AT-VM520xEB cartridge is supplied pre-mounted on the AT-LT10 headshell, but final overhang, alignment, tracking force, and anti-skate checks are still required.Will it fit every turntable?No. It is intended for compatible tonearms that accept a detachable universal headshell. Check the tonearm connector and supported assembly weight.Can it be used on a P-mount turntable?No. It is not a P-mount cartridge assembly.What phono stage does it require?Use an MM-compatible phono input with a recommended load of 47 kΩ and 150–250 pF capacitance.What is the recommended tracking force?The specified range is 1.8–2.2 g, with 2.0 g as the standard setting.Which replacement stylus is the direct match?The direct replacement is the Audio-Technica AT-VMN20xEB, sold separately. HOW TO CONNECTDetachable-Headshell Turntable SetupSource icon: deviceSource: Vinyl RecordConnection: Stylus / GrooveOutput connection: Universal Headshell ConnectorTarget icon: deviceOutput: MM Phono InputNote: Install the headshell assembly on a compatible tonearm and verify overhang, alignment, tracking force, and anti-skate before playback.External Phono Stage SetupSource icon: deviceSource: TurntableConnection: Tonearm WiringOutput connection: RCA Phono CableTarget icon: deviceOutput: External MM Phono StageNote: Connect the phono stage to an amplifier line input; the cartridge-level signal is not intended for a standard line input. Technical SpecificationsCartridge Type: VM dual moving magnet stereo cartridge with headshell Frequency Response: 20–23,000 Hz Output Voltage: 5.0 mV at 1 kHz, 5 cm/s Channel Separation: 24 dB at 1 kHz Output Balance: 1.5 dB at 1 kHz Vertical Tracking Angle: 20° Stylus and Tracking Stylus: Bonded elliptical Stylus Size: 0.3 × 0.7 mil Cantilever: Aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Static Compliance: 20 × 10⁻⁶ cm/dyne Dynamic Compliance: 7 × 10⁻⁶ cm/dyne at 100 Hz Replacement Stylus: AT-VMN20xEB, sold separately Electrical Recommended Load Impedance: 47 kΩ Recommended Load Capacitance: 150–250 pF Coil Impedance: 3.2 kΩ at 1 kHz DC Resistance: 750 Ω Coil Inductance: 480 mH at 1 kHz Headshell Assembly Headshell: AT-LT10 Compatible Cartridge Mount: Universal 1/2-inch, 4-pin cartridge mounting Assembly Dimensions: 21.5 × 18.5 × 68.4 mm Assembly Weight: 18.3 g Recommended System Setup Setup Connection Integrated Amplifier Turntable → MM Phono Input → Amplifier → Speakers External Phono Stage Turntable → MM Phono Stage → Line Input → Amplifier → Speakers What's in the boxAT-VM520xEB cartridge pre-mounted on AT-LT10 headshellDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/downloadAdditional Product ContentAudio-Technica AT-VMx Cartridge Comparison Feature AT-VM750xSH AT-VM740xML AT-VM520xEB/H Product Position Premium Shibata cartridge Premium MicroLinear cartridge Pre-mounted elliptical cartridge and headshell Stylus Nude Shibata Nude MicroLinear Bonded elliptical Cantilever Solid boron Tapered aluminum pipe Aluminum pipe Output Voltage 3.7 mV 3.2 mV 5.0 mV Headshell Included No No AT-LT10, pre-mounted Best Use Rich, detailed premium vinyl playback Precise tracking and low inner-groove distortion Convenient upgrade for compatible detachable-headshell tonearms
$168.74
-
audio-technica Audio-Technica AT6006R
Audio-Technica AT6006R is an automatic hydraulic tonearm safety raiser for compatible manual and semi-automatic turntables.It lifts the tonearm at the end of a record to reduce unnecessary stylus wear when the turntable does not provide automatic return.Why it stands outAutomatic End-of-Record LiftRaises the tonearm after playback reaches the run-out area.Hydraulic DampingProvides smooth lifting through a rubber-covered lift bar.Adjustable Installation HeightSupports a range of tonearm heights for compatible turntables.Stylus ProtectionReduces prolonged stylus contact in the run-out groove.Best for Manual turntables without auto-lift Semi-automatic turntables needing end-of-record protection Users who may not reach the turntable immediately Compatible decks with sufficient mounting space Not ideal for Turntables without suitable mounting space Fully automatic turntables that already lift and return the arm Installations where the raiser interferes with tonearm travel EMiUZEK Buying Notes AT6006R lifts the tonearm but does not return it to the armrest. Compatibility depends on available mounting space, tonearm path, and installation height. Careful positioning is essential so it activates near the end of the record without affecting normal playback. FAQDoes it return the tonearm to the rest?No. It raises the arm only.Will it fit every turntable?No. Check available space, tonearm geometry, and height.Does it require electricity?No. It uses a mechanical hydraulic lifting action.Can it be used with an automatic turntable?It is generally unnecessary when the turntable already provides automatic lift and return.Will it affect playback?Correct installation should keep it clear during normal playback until the run-out area.HOW TO CONNECTTurntable InstallationSource icon: deviceSource: Compatible Turntable PlinthConnection: Position Beside Tonearm PathOutput connection: Hydraulic Lift BarTarget icon: deviceOutput: TonearmNote: Test placement carefully before final use and confirm the trigger point with a non-critical record.Technical SpecificationsInstallation Product Type: Automatic tonearm safety raiser Lift Method: Hydraulic Compatible Tonearm Height Range: 27–39 mm Base Diameter: 14 mm Recommended System Setup Setup Connection Manual Turntable AT6006R beside Tonearm → Automatic Lift at Record End What's in the boxAT6006R tonearm safety raiserDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/download
$146.18
-
Fiio FiiO RR13
FIIO RR13 is a pocket-sized stereo FM radio that combines classic analog tuning with modern audio engineering, built-in speakers, headphone output, and a dedicated analog headphone amplifier mode. Its professional Si4831 FM receiver, custom-shaped internal antenna, detachable telescopic antenna, mechanical luminous dial, and replaceable rechargeable battery make it suitable for everyday radio listening at home or on the move. Why it stands out Professional Si4831 FM Receiver The Silicon Labs Si4831 radio chip provides stable FM reception and covers both the standard 87–108MHz band and the 76–90MHz Japanese FM band. Built-in Stereo Speakers Dual ultra-thin five-magnet speakers and independent amplifier channels allow RR13 to play radio or connected audio without external headphones. Internal and External Antennas A custom-shaped antenna is built into the compact body. The included detachable 3.5mm telescopic antenna can improve reception when using the built-in speakers. Dedicated Headphone Amplifier Mode Switch to AMP mode and connect a compatible analog-output adapter cable to use RR13 as a portable headphone amplifier, delivering up to 80mW + 80mW at 32Ω. Best for Listeners who enjoy manual FM radio tuning Portable radio listening through headphones or built-in speakers Users looking for a compact retro-style audio device Regions using either the 87–108MHz or 76–90MHz FM band Users who also want a simple analog headphone amplifier Not ideal for Internet radio, DAB, AM, or shortwave broadcasts Users who need Bluetooth, Wi-Fi, or internal music storage Direct digital USB audio without a compatible DAC adapter cable High-impedance or very demanding full-size headphones EMiUZEK Buying Notes RR13 supports FM radio only; it does not support AM, DAB, Bluetooth, Wi-Fi, or internet radio. The USB-C port is primarily for charging and analog input in AMP mode. Digital sources require a compatible USB-C cable or adapter with a built-in DAC. The 3.5mm port is used for headphones in HP mode and for the included telescopic antenna in SPK mode. Use a protected 3.7V 10440 rechargeable lithium battery with the correct polarity when replacing the supplied battery. FAQ Does FIIO RR13 support AM radio? No. RR13 is an FM-only radio supporting 87–108MHz and 76–90MHz frequency ranges. Can RR13 play without headphones? Yes. Select SPK mode to listen through its built-in stereo speakers. How do I improve FM reception? In speaker mode, connect the supplied telescopic antenna to the 3.5mm port and fully extend it. Location, surrounding buildings, electrical interference, and local broadcast strength can affect reception. Can RR13 work as a USB DAC? RR13 does not contain a digital USB DAC. In AMP mode, it can accept analog audio through USB-C when used with a compatible adapter cable containing its own DAC. Can I use RR13 as a headphone amplifier? Yes. Select AMP mode, connect a compatible analog source through USB-C, select HP output, and connect 3.5mm headphones. Is the battery replaceable? Yes. RR13 uses a protected rechargeable 450mAh 10440 lithium battery. Observe the correct positive and negative orientation when replacing it. Does RR13 have a sleep timer? Yes. The automatic power-off timer can be set to 30 or 60 minutes. HOW TO CONNECT FM Radio with Headphones Source icon: Radio Tower Source: FM Broadcast Connection: Built-in Antenna / Headphone Cable Output connection: 3.5mm Headphone Output Target icon: Headphones Output: Wired Headphones / Earphones Note: Select FM1 or FM2 and set the output switch to HP. FM Radio with Built-in Speakers Source icon: Radio Tower Source: FM Broadcast Connection: Internal Antenna / Detachable Telescopic Antenna Output connection: Built-in Speaker Output Target icon: Speaker Output: Built-in Stereo Speakers Note: Set the output switch to SPK and connect the telescopic antenna to the 3.5mm port when stronger reception is required. Portable Headphone Amplifier Source icon: Smartphone Source: Smartphone / Tablet / Computer Connection: Compatible USB-C DAC Adapter Cable Output connection: 3.5mm Headphone Output Target icon: Headphones Output: Wired Headphones / Earphones Note: Select AMP mode. The connected adapter must provide analog audio output. Technical Specifications Feature Specification Product type Portable stereo FM radio and analog headphone amplifier Radio chip Silicon Labs Si4831 Analog audio chip Custom FIIO DDB AS100 FM1 frequency range 87–108MHz FM2 frequency range 76–90MHz Antenna Built-in custom-shaped antenna and detachable 3.5mm telescopic antenna Headphone output 3.5mm single-ended Recommended headphone impedance 8–100Ω AMP output at 32Ω ≥80mW + 80mW Built-in speakers 8Ω, 1W ×2 Sound settings BASS OFF / BASS 1 / BASS 2 with 3D effect Controls Analog tuning knob, volume knob, mode switch, output switch, sound-effect switch Sleep timer Off / 30 minutes / 60 minutes USB connection USB-C charging and compatible analog audio input Power requirement DC 5V/2A Battery Replaceable protected 450mAh 10440 rechargeable lithium battery Charging time Approximately 2.5 hours Radio battery life Approximately 7 hours with headphones; approximately 4 hours with speakers AMP battery life Approximately 18 hours with headphones; approximately 4 hours with speakers Dimensions Approximately 85.6 × 43.4 × 16.4mm Weight Approximately 76g Available colors Retro Gold / Black / Red / Silver What's in the box, manuals and downloads FIIO RR13 ×1 USB-A to USB-C charging cable ×1 Detachable telescopic antenna ×1 Quick start guide ×1 Warranty card ×1 Visit the official FIIO support center for manuals and product information Additional Product Content RR13 operating modes Mode Frequency or input Available output FM1 87–108MHz FM radio 3.5mm headphones or built-in speakers FM2 76–90MHz FM radio 3.5mm headphones or built-in speakers AMP Compatible analog input through USB-C 3.5mm headphones or built-in speakers
$64.99
-
sonos Sonos Era 300 Stand / Era 100 Stand
Place an Era 100 or Era 300 at a stable listening height without using furniture. Each stand is shaped for its selected speaker, routes the power cable neatly and keeps controls and connections accessible.Why it stands outModel-specific fitSeparate Era 100 and Era 300 selections match the mounting points of the chosen speaker.Cleaner cable pathIntegrated routing keeps the speaker power cable close to the stand.Purpose-built placementMoves the speaker away from shelves and furniture for more flexible positioning.Matching finishBlack and white selections coordinate with the corresponding Sonos speaker.Best for Rear-surround placement Stereo-pair listening Rooms without suitable shelves Clean cable-managed installations Era 100 or Era 300 owners Not ideal for Other Sonos speaker models Buyers needing adjustable stand height Wall-mounted installations Use on an unstable or sharply sloped floor EMiUZEK Buying Notes Select Era 100 Stand or Era 300 Stand; the top attachment is not universal. Speaker is not included. Choose the colour and confirm the power cable can reach the intended outlet. FAQIs the speaker included?No. This listing is for the selected stand only.Does one stand fit both models?Choose the correct model-specific option; Era 100 and Era 300 use different speaker attachments.Can the power cable be hidden?The stand provides cable routing to reduce visible cable clutter, but the cable still exits near the base.Is the height adjustable?No adjustable-height mechanism is stated for this model.Can I use it for surround speakers?Yes. A stand is useful for positioning an Era speaker as a rear surround at a consistent height.Can it be used on carpet?Use only on a stable surface and follow the included installation hardware guidance.Which colours are available?The store variants list black and white.Will it fit Sonos One or Five?No compatibility with Sonos One or Five is stated.HOW TO CONNECT Attach the speaker — Secure the selected Era 100 or Era 300 to its matching stand hardware. Route the power cable — Run the Sonos power cable through the stand’s cable-management path. Place and power — Set the base on a stable surface, connect power and complete speaker setup in the Sonos app. Technical Specifications Feature Specification Compatible speakers Sonos Era 100 or Sonos Era 300, according to selected variant Product type Fixed-height speaker floor stand Variants Era 100 Stand; Era 300 Stand Colours Black; white Cable management Integrated power-cable routing Speaker orientation Standard upright orientation Speaker included No Installation Assembly required Use Indoor Era 100 official stand reference height 35.83 in / 910 mm Era 300 official stand reference height 37.64 in / 956 mm Additional Product Content
$179.00 - $265.05
-
sonos Sonos Ray
Improve television dialogue and everyday sound in a compact room with Sonos Ray. Its optical input suits straightforward TV setups, while WiFi, AirPlay 2 and the Sonos app add music streaming and multiroom playback.Why it stands outCompact TV upgradeA small cabinet fits bedrooms, offices and secondary TVs.Optical simplicityOne optical cable handles compatible TV audio without HDMI setup.Dialogue-focused designCentre-oriented acoustic processing improves speech clarity.Expandable Sonos systemAdd compatible surrounds and a Sonos Sub later.Best for Bedrooms and small rooms TVs with optical output Dialogue improvement Sonos multiroom music Buyers not needing Dolby Atmos Not ideal for Dolby Atmos content HDMI ARC/eARC control Bluetooth audio Large-room cinema output EMiUZEK Buying Notes Ray requires an optical TV output; it has no HDMI port. TV remote control may require IR setup in the Sonos app. For Atmos or HDMI eARC, choose Beam Gen 2 or Arc Ultra. FAQDoes Ray support HDMI ARC?No. It connects to the TV by optical audio.Does it support Dolby Atmos?No.Can my TV remote control volume?Ray can learn compatible infrared remote commands.Does it have Bluetooth?No Bluetooth audio input is listed.Can I add surrounds?Yes, using a compatible matching pair of Sonos speakers.Can I add a subwoofer?Yes, with a compatible Sonos Sub model.Can it stream music?Yes, over WiFi through Sonos services and AirPlay 2.Does Trueplay work?Yes, with a supported iOS device.HOW TO CONNECT Optical TV — Connect the included/compatible optical cable from TV to Ray. WiFi — Add Ray in the Sonos app for streaming and system control. Apple AirPlay 2 — Select Ray from a compatible Apple device’s AirPlay menu. Technical Specifications Feature Specification Product type Compact soundbar TV input Optical digital audio HDMI Not supported Dolby Atmos Not supported Wireless WiFi; Apple AirPlay 2 Bluetooth Not supported Room tuning Trueplay with supported iOS device Remote control IR remote learning Expansion Compatible surrounds and Sonos Sub Ethernet 10/100 Colours Black; white Use Indoor Additional Product ContentComparison: choose the right product Decision point Sonos Ray Sonos Beam Gen 2 TV connection Optical HDMI eARC/ARC Dolby Atmos No Yes Room scale Small Small to medium Best when You need simple optical TV audio You want Atmos and HDMI control
$198.00 - $208.05
-
Fiio FiiO FT1
FiiO FT1 is a wired closed-back over-ear headphone built around a 60mm dynamic driver, a nanowood-fibre composite diaphragm and natural solid-wood ear cups. Its warm, full-bodied presentation, useful passive isolation and 32Ω impedance make it suitable for everyday listening at a desk, in a shared room or with a portable player. Unlike FT1 Pro, FT1 is not an open-back planar headphone. It prioritizes stronger bass presence, reduced sound leakage and easier source matching, while including separate 3.5mm single-ended and 4.4mm balanced cables. Why it stands out 60mm nanowood-fibre dynamic driver The large driver combines a wood-fibre composite diaphragm, W-shaped suspension gasket and 25mm voice coil to deliver extended low frequencies and a smooth, full-bodied presentation. Real wood closed-back ear cups Natural black-walnut or beech shells give every pair a slightly different grain pattern, while the closed acoustic structure reduces sound leakage and provides up to 26dB of passive sound attenuation under FIIO’s test conditions. Easy matching without a powerful amplifier With 32Ω impedance and 98dB/mW sensitivity, FT1 can reach practical listening levels from many portable players, dongle DACs and desktop headphone outputs. Two complete cables included A 1.5m 3.5mm single-ended cable and a separate 1.5m 4.4mm balanced cable are supplied, both using silver-plated oxygen-free copper conductors and dual 3.5mm TRS connectors at the ear cups. Best for Listeners who want a warm, bass-present closed-back headphone Home, office and shared-room listening where reduced leakage matters Portable players, dongle DACs and compact desktop headphone systems Buyers choosing natural wood construction and replaceable cables Not ideal for Listeners seeking the open soundstage and flatter bass balance of an open-back headphone Wireless listening, active noise cancellation or headset microphone use Buyers who require a very light or highly ventilated headphone for long sessions Professional monitoring where a strictly neutral tonal balance is the priority EMiUZEK Buying Notes FT1 is a wired passive headphone. It has no Bluetooth, battery, active noise cancellation or built-in microphone. The black-walnut and beech versions use natural wood, so colour and grain will vary between individual pairs and will not exactly match product photographs. Two separate cables are included. Use the 3.5mm cable for standard outputs and the 4.4mm cable only with a true balanced headphone output. FT1 is easier to drive than FT1 Pro, but phones without a headphone jack still require a compatible USB-C or Lightning dongle DAC. FAQ Should I choose FiiO FT1 or FT1 Pro? Choose FT1 when you need a closed-back headphone with fuller bass, less leakage and easier source matching. Choose FT1 Pro when you specifically want an open-back planar design, a more spacious presentation and a flatter bass balance for quiet indoor listening. FT1 Pro is not simply a higher-grade version of the same headphone; the enclosure, driver and use case are different. What kind of sound should I expect from FT1? FT1 has a warm, energetic balance with emphasized low bass and a smooth overall presentation. It suits listeners who want weight and impact without moving to a wireless consumer headphone. Buyers seeking a lean, strictly neutral monitor or very forward upper-midrange presentation should compare other models. Does FT1 need a headphone amplifier? Not necessarily. Its 32Ω impedance and 98dB/mW sensitivity allow many portable players, dongle DACs and desktop devices to drive it adequately. A dedicated DAC/amplifier may provide cleaner volume control or additional connection choices, but purchasing a large high-power amplifier is not mandatory. Can I connect FT1 directly to a phone? Yes, if the phone has a 3.5mm headphone output. Phones without one require a compatible USB-C or Lightning dongle DAC. FT1 has no Bluetooth connection, so it cannot pair with a phone wirelessly. When should I use the 3.5mm cable or the 4.4mm cable? Use the supplied 3.5mm cable with ordinary headphone outputs and the supplied 4.4mm cable with compatible balanced outputs. Balanced operation may provide more power from some players and amplifiers, but it does not automatically guarantee better sound. Never insert the 4.4mm plug into an incompatible socket or use an unsafe balanced-to-single-ended adapter. Does the closed-back design provide active noise cancellation? No. FT1 reduces outside sound and leakage through passive acoustic isolation only; there are no microphones or electronic ANC. Low-frequency transport noise will not be cancelled in the same way as with an ANC headphone. Is FT1 suitable for gaming and voice chat? Its closed-back presentation and bass impact can work well for games, but the supplied cables do not include a microphone. Voice chat requires a separate microphone or a compatible replacement cable designed for the dual 3.5mm ear-cup connections. Can the cable be replaced? Yes. The ear cups use dual 3.5mm TRS connectors. A replacement cable must have the correct left and right wiring and sufficient connector clearance; a generic single-sided 3.5mm cable will not work. Are the wooden ear cups on every pair identical? No. Black walnut and beech are natural materials, so grain, shade and small visual variations are expected. These differences are cosmetic and make each pair visually individual. Will FT1 feel hot or heavy during long listening sessions? FT1 weighs about 340g without the cable. Its closed-back pads improve isolation but retain more heat than an open-back headphone. Comfort depends on head shape and session length, so users who are sensitive to headband pressure or warmth should factor this into the choice. Technical Specifications Feature Specification Product type Wired closed-back over-ear dynamic headphone Driver 60mm dynamic driver Diaphragm Nanowood-fibre composite with W-shaped suspension gasket Ear-cup material Natural black walnut or beech Frequency response 10Hz–40kHz Impedance 32Ω Sensitivity 98dB/mW at 1kHz; 113dB/Vrms at 1kHz Passive sound attenuation Up to 26dB under FIIO test conditions Ear-cup connectors Dual 3.5mm TRS Included cable plugs 3.5mm single-ended; 4.4mm balanced Cable material 392-core silver-plated oxygen-free copper, 24AWG Cable length Approx. 1.5m each Weight Approx. 340g without cable What's in the box, manuals and downloads FiiO FT1 Headphones ×1 Headphone Storage Bag ×1 3.5mm Single-Ended Headphone Cable ×1 4.4mm Balanced Headphone Cable ×1 3.5mm-to-6.35mm Adapter ×1 Quick Start Guide ×1 Visit the EMiUZEK download center. Additional Product Content FiiO FT1 or FT1 Pro? Feature FiiO FT1 FiiO FT1 Pro Acoustic design Closed-back Open-back Driver type 60mm dynamic Planar magnetic Sound direction Warmer with stronger bass presence Flatter bass with a more open presentation Isolation and leakage Better isolation and lower leakage Minimal isolation and clearly audible leakage Source matching Easier to drive from portable equipment Benefits more from capable amplification Choose it when You need privacy, bass weight and everyday flexibility You listen in a quiet room and prioritize openness
$155.99
-
Fiio FiiO BR15 R2R
FiiO BR15 R2R is a high-resolution Bluetooth receiver and desktop DAC designed to upgrade modern and traditional HiFi systems. Featuring a fully differential 24-bit R2R DAC, advanced Bluetooth decoding, USB DAC functionality, and balanced XLR/RCA outputs, BR15 R2R delivers flexible high-quality digital audio connectivity for home audio systems. Why it stands out True R2R DAC Architecture BR15 R2R uses a fully differential R2R DAC design to deliver detailed and natural sound reproduction with high-resolution audio sources. High-Quality Wireless Audio Upgrade Advanced Bluetooth decoding with modern high-resolution codecs allows wireless music playback with excellent sound quality. Flexible Digital Audio Hub With USB, optical, coaxial, RCA, and XLR connectivity, BR15 R2R easily integrates into different HiFi systems. Compact Desktop HiFi Solution Its desktop design provides a simple way to add premium decoding and wireless capability to existing audio equipment. Best for Upgrading traditional amplifiers Active speaker systems Desktop HiFi setups Bluetooth high-resolution audio systems Users wanting R2R DAC performance Not ideal for Users needing a headphone amplifier Users looking for a WiFi streaming player Users requiring a speaker power amplifier Users wanting a portable DAC solution EMiUZEK Buying Notes FiiO BR15 R2R is a Bluetooth receiver and DAC, not a power amplifier. It cannot directly drive passive speakers. Connect it to an amplifier, receiver, or powered speakers for audio playback. For wireless playback, use compatible Bluetooth devices with supported codecs. FAQ Does FiiO BR15 R2R have a built-in headphone amplifier? No. BR15 R2R is mainly designed as a Bluetooth receiver and DAC with line-level outputs. Can FiiO BR15 R2R connect to an amplifier? Yes. It can connect to amplifiers through RCA or balanced XLR outputs. What DAC does FiiO BR15 R2R use? It uses a fully differential 24-bit R2R DAC architecture designed by FiiO. Does FiiO BR15 R2R support LDAC and aptX Lossless? Yes. It supports high-resolution Bluetooth codecs including LDAC and aptX Lossless. Can FiiO BR15 R2R work with active speakers? Yes. The RCA and XLR outputs allow connection to compatible powered speakers. Does FiiO BR15 R2R support USB DAC mode? Yes. It can be connected to computers through USB for high-resolution digital audio playback. Does FiiO BR15 R2R support WiFi streaming? No. BR15 R2R focuses on Bluetooth, USB, optical, and coaxial audio input rather than network streaming. HOW TO CONNECT Bluetooth HiFi Upgrade Source icon: SmartphoneSource: Bluetooth MusicConnection: BluetoothOutput connection: RCA / XLRTarget icon: Amplifier or Active SpeakersOutput: Wireless HiFi System Note: Upgrade traditional audio systems with high-quality Bluetooth playback. USB DAC Setup Source icon: ComputerSource: High Resolution MusicConnection: USBOutput connection: RCA / XLRTarget icon: AmplifierOutput: Desktop HiFi System Note: Use BR15 R2R as a desktop DAC. Digital Audio Setup Source icon: CD Player / TV / Digital SourceSource: Optical / CoaxialConnection: Digital InputOutput connection: Analog OutputTarget icon: AmplifierOutput: HiFi Audio System Note: Add high-quality DAC conversion to digital sources. Technical Specifications DAC Feature Specification DAC Architecture Fully Differential 24-bit R2R USB DAC Resolution Up to 32-bit / 384kHz DSD Support Up to DSD256 PEQ 10-band Parametric EQ Bluetooth Feature Specification Bluetooth Chip Qualcomm QCC5181 Bluetooth Version Bluetooth 5.4/6.0 class chipset LDAC Supported aptX Lossless Supported aptX Adaptive Supported AAC / SBC Supported Inputs Feature Specification USB Audio Input Supported Optical Input Supported Coaxial Input Supported Bluetooth Input Supported Outputs Feature Specification RCA Line Output Supported XLR Balanced Output Supported Optical Output Supported Coaxial Output Supported Recommended System Setup Setup Connection Amplifier Upgrade Phone → BR15 R2R → Amplifier → Speakers Active Speaker System Phone / PC → BR15 R2R → Active Speakers Desktop DAC System Computer → BR15 R2R → Amplifier → Speakers What's in the box FiiO BR15 R2R ×1 Power Cable ×1 USB Cable ×1 Remote Control ×1 User Manual ×1 Download Center Access product manuals, technical documents, and support resources. https://emiuzek.com/pages/download Additional Product Content FiiO BR15 R2R vs FiiO BR13 Feature BR15 R2R BR13 Product Position R2R Bluetooth DAC Bluetooth DAC Receiver DAC Architecture 24-bit R2R Traditional DAC Bluetooth High-resolution Bluetooth Bluetooth Receiver XLR Output Yes No RCA Output Yes Yes USB DAC Yes Limited Best Focus R2R sound + HiFi system upgrade Affordable wireless upgrade
$163.53 - $199.00
-
audio-technica Audio-Technica-AT-VM95EN
Audio-Technica AT-VM95EN is a VM95-series dual moving magnet cartridge with a nude elliptical stylus.Its lower-mass nude diamond improves clarity and transient detail while retaining the series' practical interchangeable-stylus design.Why it stands outNude ellipticalBalanced detail upgrade through a profile selected for accurate groove contact.VM95 Interchangeable Stylus PlatformSupports all six VM95-series replacement stylus assemblies for maintenance or future upgrades.Threaded Cartridge BodySimplifies installation on compatible 1/2-inch-mount headshells.Dual Moving Magnet DesignMirrors the cutter-head geometry for stable stereo separation and dependable playback.Best for Balanced detail upgrade Compatible 1/2-inch-mount turntables Users comfortable with cartridge alignment MM phono systems Not ideal for P-mount turntables Users wanting a pre-mounted headshell assembly Systems without an MM phono input or external MM phono stage EMiUZEK Buying Notes AT-VM95EN is a cartridge only; a headshell is not included. It requires installation and alignment on a compatible 1/2-inch mounting system. Use an MM phono input and set tracking force to 1.8–2.2 g, with 2.0 g standard. FAQDoes it include a headshell?No. A compatible headshell or tonearm mount is required.Will it fit every turntable?No. Verify 1/2-inch mounting and tonearm compatibility; it is not a P-mount product.What phono stage does it require?Use an MM-compatible phono input with 47 kΩ load impedance and 100–200 pF load capacitance.What is the tracking force?1.8–2.2 g, with 2.0 g standard.Can the stylus be replaced?Yes. The VM95 body accepts all six VM95-series replacement stylus assemblies.Is final setup still required?Yes. Cartridge alignment, overhang, tracking force, and anti-skate must be set correctly.HOW TO CONNECTStandard Turntable SetupSource icon: deviceSource: Vinyl RecordConnection: Stylus / GrooveOutput connection: Cartridge PinsTarget icon: deviceOutput: MM Phono InputNote: Install and align the cartridge on a compatible 1/2-inch mount, then verify overhang, tracking force, and anti-skate.Technical SpecificationsCartridge and Stylus Type: VM dual moving magnet stereo cartridge Frequency Response: 20–23,000 Hz Output Voltage: 3.5 mV at 1 kHz, 5 cm/s Channel Separation: 22 dB at 1 kHz Output Balance: 2.0 dB at 1 kHz Stylus: Nude elliptical Cantilever: Aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Electrical and Physical Recommended Load: 47 kΩ / 100–200 pF Cartridge Weight: 6.1 g Cartridge Dimensions: 17.2 × 18.9 × 28.3 mm Mounting: 1/2-inch compatible Recommended System Setup Setup Connection Integrated Amplifier Turntable → MM Phono Input → Amplifier → Speakers External Phono Stage Turntable → MM Phono Stage → Line Input → Amplifier → Speakers What's in the boxAT-VM95EN cartridgeDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/downloadAdditional Product ContentAudio-Technica VM95 Series Comparison Feature AT-VM95E AT-VM95EN AT-VM95ML AT-VM95SH Stylus Bonded elliptical Nude elliptical Nude MicroLinear Nude Shibata Frequency Response 20–22,000 Hz 20–23,000 Hz 20–25,000 Hz 20–25,000 Hz Best Use Accessible everyday playback Balanced detail upgrade Precise tracking and low inner-groove distortion Rich detail and extended groove contact
$122.76
-
Xangsane Xangsane Refrigeration 6N HiFi OCC Power Cable
High-performance HiFi audio power cable The Xangsane 6N HiFi OCC power cable delivers superior audio transmission with its 3 × 3.31mm² high-conductivity design, ideal for amplifiers and DVD players, ensuring crystal-clear sound quality. • Universal compatibility with multiple standards Engineered for global use, this cable features US/AU/EU connection options, making it compatible with audio systems across different regions, including US Style 1root, AU Style 1root, EU Style 1root. • Pure oxygen-free copper construWhy it stands outPurpose-built formatXangsane Refrigeration 6N HiFi OCC Power Cable focuses on the power cable role shown by its existing product configuration.Configuration choiceAvailable selections let buyers match the required color, bundle, connector, capacity or regional power format.System integrationThe existing page information and product images define the supported connection path without assuming undocumented functions.EMiUZEK support pathCentralized download and buying notes help installers verify the product before setup.Best for Systems requiring the selected connector format Installations needing the offered length Replacement or custom cable routing Buyers who have verified equipment compatibility Not ideal for Devices with a different inlet or connector Unknown current or network requirements Installations where bend direction has not been checked Product Details and Connection ViewsEMiUZEK Buying Notes Confirm both connector ends, orientation and length before ordering. Cable construction does not replace correct electrical or network compatibility. Custom-length or angled versions may require order notes and additional lead time. Frequently asked questionsWhat equipment can I connect it to?High-performance HiFi audio power cable The Xangsane 6N HiFi OCC power cable delivers superior audio transmission with its 3 × 3.31mm² high-conductivity design, ideal for amplifiers and DVD players, ensuring crystal-clear sound quality.Which output should I use in my system?• Effective braided shielding for noise reduction Equipped with braid shielding, the cable reduces electromagnetic interference, ensuring clean audio output and reliable performance in sensitive audio environments.What power or plug option should I choose?• Universal compatibility with multiple standards Engineered for global use, this cable features US/AU/EU connection options, making it compatible with audio systems across different regions, including US Style 1root, AU Style 1root, EU Style 1root.What should I confirm before ordering?• Pure oxygen-free copper construction Built with Oxyacid Free Copper connectors at both ends, this cable minimizes signal loss and interference, delivering stable, high-fidelity audio performance for front and rear amplifier stages.What does the original product page state about this feature?• Multiple length options for flexible installation Available in 1m, 1.5m, 2m, and 3m lengths, this audio line offers flexibility for various setup configurations, allowing easy routing without compromising signal integrity.HOW TO CONNECTDirect equipment connectionSource: Compatible source deviceConnection: Selected cable connector and lengthOutput connection: Compatible destination deviceRack installationSource: Source componentConnection: Cable routed without sharp bendsOutput connection: Switch, amplifier or power distributorCustom orientationSource: Equipment with limited rear clearanceConnection: Selected straight or angled connectorOutput connection: Destination equipmentTechnical Specifications Feature Specification Model Xangsane Refrigeration 6N HiFi OCC Power Cable Outputs • Effective braided shielding for noise reduction Equipped with braid shielding, the cable reduces electromagnetic interference, ensuring clean audio output and reliable performance in sensitive audio environments. Network / cable standard High-performance HiFi audio power cable The Xangsane 6N HiFi OCC power cable delivers superior audio transmission with its 3 × 3.31mm² high-conductivity design, ideal for amplifiers and DVD players, ensuring crystal-clear sound quality. Use and compatibility • Universal compatibility with multiple standards Engineered for global use, this cable features US/AU/EU connection options, making it compatible with audio systems across different regions, including US Style 1root, AU Style 1root, EU Style 1root. • Pure oxygen-free copper construction Built with Oxyacid Free Copper connectors at both ends, this cable minimizes signal loss and interference, delivering stable, high-fidelity audio performance for front and rear amplifier stages. Available configurations TYPE: US, EU, AU; 长度: 1m, 2m, 3m, custom L Additional Product ContentComparison: Choosing the Right Configuration Decision point This product Alternative configuration Different product type Primary role power cable Same model with a different option or bundle Choose only when the required system role changes Compatibility check Verify listed connections Verify included accessories Verify the full signal chain Best choice when The stated role matches your system You need a different plug, color, length or bundle You need functions not documented here
$199.00 - $1,999.00
-
Questyle Questyle NHB15 USB-C Noise-Cancelling IEMs
Questyle NHB15 is a USB-C true-lossless in-ear headphone system with an integrated digital DAC/amplifier cable for compatible phones, tablets and computers.It supports up to 192kHz / 24-bit playback, uses Questyle Current Mode technology and includes a replaceable 3.5mm cable for conventional analogue sources. Why it stands outUSB-C true-lossless connectionConnects directly to compatible USB-C devices without a separate headphone dongle.192kHz / 24-bit playbackSupports high-resolution PCM playback from compatible hardware and software.Current Mode DAC/amplifier cableQuestyle’s low-power Current Mode SiP provides digital decoding and headphone drive.Replaceable dual-cable designSwitch between the supplied USB-C digital cable and conventional 3.5mm analogue cable. Best for USB-C phones, tablets and computers Portable high-resolution wired listening Users wanting digital and 3.5mm compatibility Low-latency wired music and video use Not ideal for Users specifically requiring active noise cancellation Wireless Bluetooth listening Lightning-only devices without a compatible adapter EMiUZEK Buying Notes NHB15 is a wired USB-C true-lossless earphone; the official guide does not specify active noise cancellation. USB-C audio compatibility depends on the connected device supporting digital USB audio. Use the supplied 3.5mm cable for analogue sources; decoding quality then depends on the source. Frequently asked questionsDoes NHB15 have active noise cancellation?No ANC function is specified in Questyle’s official NHB15 guide.Does it need a separate DAC?No when using the supplied USB-C digital DAC/amplifier cable with a compatible source.Can it connect to a 3.5mm output?Yes, use the supplied 3.5mm cable.Does it support 192kHz / 24-bit?Yes, with compatible USB-C hardware and playback software.Can the cable be replaced?Yes, the cable system is replaceable.Does it use Bluetooth?No, it is a wired earphone system. HOW TO CONNECTUSB-C Phone or TabletSource: Compatible USB-C mobile deviceConnection: Supplied USB-C digital cableTarget: NHB15 earpiecesUSB-C ComputerSource: PC / Mac / compatible computerConnection: USB-C audioTarget: NHB15 earpiecesAnalogue PlayerSource: DAP / DAC / headphone amplifierConnection: Supplied 3.5mm cableTarget: NHB15 earpieces Technical Specifications Feature Specification Product type USB-C true-lossless wired in-ear headphones Maximum digital playback PCM 192kHz / 24-bit Amplification Questyle Current Mode SiP in digital cable Digital connection USB-C Analogue connection 3.5mm Cable design Replaceable Included ear-tip sizes XS, S, M, L and XL Bluetooth / ANC Not specified / not included What's in the box Questyle NHB15 earphones USB-C digital cable 3.5mm to 2-pin cable Five pairs of ear tips: XS, S, M, L and XL Leather carrying case Quick-start guide Warranty card Download CenterAccess product manuals, firmware updates, and additional support resources.Download CenterAdditional Product Content📊 Comparison: Which USB-C IEM Setup Is Right for You?Choose NHB15 for a ready-to-use 192kHz/24-bit Current Mode system with both USB-C and 3.5mm cables; choose MOONDROP MAY for app-based DSP tuning, or a separate DAC plus IEM for maximum upgrade freedom. Feature Questyle NHB15 MOONDROP MAY IEM + External USB-C DAC Core buying reason True-lossless Current Mode cable system USB-C DSP tuning at a lower price Maximum component flexibility Digital connection USB-C DAC/amplifier cable USB-C DSP cable Separate USB-C DAC Maximum stated playback 192kHz / 24-bit DSP-focused; not sold primarily on 192kHz playback Depends on the selected DAC Driver design Questyle-tuned IEM system 10mm dynamic + 6mm planar Choose any compatible IEM Sound adjustment Hardware-focused fixed tuning MOONDROP app DSP presets and tuning Depends on DAC, app and IEM 3.5mm cable Included Requires a separate compatible cable Usually available through the IEM cable ANC No No Usually no Best choice when You want high-resolution plug-and-play plus analogue flexibility You prefer DSP experimentation and value You want to upgrade the DAC and IEM independently
$229.00 $199.00
-
Questyle Questyle NHB12
Questyle NHB12 is an MFi-certified lossless in-ear headphone system with a Lightning DAC/amplifier cable for high-resolution listening from compatible Apple devices.A 10.2mm dynamic driver, Current Mode amplification and interchangeable Lightning and 3.5mm cables combine portable convenience with flexible wired use. Why it stands outIntegrated Lightning DAC and amplifierThe supplied digital cable bypasses the source’s analogue headphone stage for a single-cable Apple listening solution.192kHz / 24-bit playbackSupports high-resolution PCM playback from compatible apps and Apple devices.Current Mode signal pathQuestyle’s low-power Current Mode SiP is built into the digital cable.Interchangeable cable systemUse the digital Lightning cable or switch to the supplied 3.5mm analogue cable. Best for Lightning-equipped iPhone and iPad listening Apple Music lossless playback Portable wired HiFi without a separate dongle Listeners who also use 3.5mm sources Not ideal for USB-C-only devices without an appropriate connection Users requiring active noise cancellation Wireless Bluetooth listening EMiUZEK Buying Notes The built-in DAC and amplifier are in the Lightning cable, not inside the earpieces. Use the 3.5mm cable for conventional headphone outputs; high-resolution decoding then depends on the source device. NHB12 is a wired IEM and does not provide Bluetooth or active noise cancellation. Frequently asked questionsDoes it need an external DAC?No when using the supplied Lightning DAC/amplifier cable with a compatible device.Can it connect to a 3.5mm player?Yes, use the supplied 3.5mm cable.Does it support 192kHz / 24-bit audio?Yes, through the compatible digital cable and playback software.Does it have active noise cancellation?No. Isolation is provided by the in-ear fit.Can the cable be replaced?Yes, it uses an interchangeable 2-pin cable system. HOW TO CONNECTLightning Apple DeviceSource: iPhone / iPad with LightningConnection: Supplied Lightning DAC cableOutput: 2-pin IEM connectionTarget: NHB12 earpiecesPortable Music PlayerSource: DAP / portable DACConnection: Supplied 3.5mm cableOutput: Analogue headphone outputTarget: NHB12 earpiecesDesktop AudioSource: DAC / headphone amplifierConnection: 3.5mm headphone outputTarget: NHB12 earpieces Technical Specifications Feature Specification Product type Wired in-ear headphones with digital DAC cable Driver 10.2mm dynamic driver Digital playback Up to PCM 192kHz / 24-bit Amplification Questyle Current Mode SiP in digital cable Digital connection Apple Lightning, MFi certified Analogue connection 3.5mm Earpiece cable interface Detachable 2-pin Wireless / ANC Not included What's in the box Questyle NHB12 earphones Lightning DAC/amplifier cable 3.5mm analogue cable Ear tips Carrying case Product documentation Download CenterAccess product manuals, firmware updates, and additional support resources.Download CenterAdditional Product Content📊 Comparison: Which Lightning HiFi Setup Is Right for You?Choose NHB12 when you want genuine 192kHz/24-bit Lightning playback without a separate dongle; choose basic Lightning earphones for simplicity and calls, or a separate DAC plus IEM when upgrade flexibility matters most. Feature Questyle NHB12 Basic Lightning Earphones IEM + External Lightning DAC Core buying reason Integrated high-resolution Questyle system Lowest complexity and cost Maximum component choice Maximum digital playback Up to 192kHz / 24-bit Typically limited below 192kHz Depends on the selected DAC DAC / amplifier Built into the Lightning cable Built into the cable Separate dongle Driver 10.2mm dynamic driver Model dependent Choose any compatible IEM 3.5mm source use Included interchangeable cable Usually unavailable Depends on the IEM cable Pocket complexity One cable, no extra dongle One cable Extra DAC and connection Upgrade flexibility Replaceable 2-pin cables Low Highest Best choice when You want a refined one-cable Lightning HiFi solution You mainly need calls and casual listening You want to choose and upgrade DAC and IEM separately
$399.00 $199.00
-
Fiio FiiO K11 R2R
FiiO K11 R2R is a compact desktop DAC and headphone amplifier for listeners who specifically want an affordable resistor-ladder design rather than the more conventional delta-sigma architecture used in the standard K11. Its four-channel fully differential 24-bit R2R network uses 192 precision thin-film resistors and offers selectable NOS and OS playback. USB-C, optical and coaxial inputs cover common desktop and television sources, while 6.35mm and 4.4mm headphone outputs plus RCA line and preamplifier modes allow it to serve both headphones and a stereo system.Why it stands out Affordable true R2R conversion FIIO’s four-channel fully differential 24-bit resistor ladder uses 192 precision thin-film resistors, making the K11 R2R a practical entry point for listeners who want to try R2R conversion without buying a separate high-priced DAC. NOS and OS modes with clearly different purposes NOS sends the signal through the ladder without digital oversampling, while OS upsamples to 384kHz before conversion. The two modes let you compare a more direct R2R presentation with a cleaner, more controlled alternative. Useful power across balanced and single-ended headphones The 4.4mm balanced output reaches up to 1300mW + 1300mW at 32Ω, while the 6.35mm output, three gain levels and electronic volume control support a wider range of full-size headphones and earphones. Compact DAC, headphone amplifier and preamplifier in one Use USB-C, optical or coaxial input, listen through headphones, or switch the RCA output between fixed line level and variable preamplifier mode for an external amplifier or active speakers.Best for Listeners who specifically want to try R2R and compare NOS with OS playback Compact PC or Mac headphone systems using USB-C Television headphone systems using optical PCM output Users who want one desktop unit for both headphones and RCA-equipped stereo systems Not ideal for Users who want Bluetooth reception or wireless-headphone transmission Turntables, cassette decks or other sources that require an analog input Systems that require balanced XLR line output Users seeking the lowest measured distortion and noise rather than the R2R presentation Portable use or direct connection to passive speakers EMiUZEK Buying Notes K11 R2R and the standard K11 are different sound and feature choices, not simple old and new versions. Choose the R2R model for its resistor ladder and NOS/OS modes; choose the standard K11 if conventional delta-sigma conversion and stronger measured noise and distortion performance matter more. There is no Bluetooth or analog input. Phones and computers need USB audio, while televisions and digital transports need compatible optical or coaxial output. The highest quoted 1300mW + 1300mW power is from the 4.4mm balanced output at 32Ω. The 6.35mm output has different power figures, so do not compare them as if they were identical. For very sensitive earphones, begin with low gain and low volume. Buyers who prioritize the lowest possible noise floor should compare the standard K11 before ordering. The rear RCA sockets can provide fixed line output or variable preamplifier output, but there is no balanced XLR line output and passive speakers still require a separate amplifier. FAQ Should I buy the K11 R2R or the standard K11? Choose K11 R2R if the resistor-ladder design, fuller vocal presentation and the ability to switch between NOS and OS are the main reasons for buying. The standard K11 uses a conventional delta-sigma DAC, offers digital-filter choices and has better measured distortion and noise performance. The R2R version is an alternative tuning and architecture, not an automatic upgrade in every area. What actually changes when I switch between NOS and OS? NOS avoids digital oversampling and preserves the direct R2R conversion path; many listeners choose it for a denser, more relaxed presentation. OS upsamples to 384kHz before conversion and generally presents edges and detail more cleanly. The setting does not increase amplifier power, and the preferred mode depends on the headphones and recording. Will it drive my headphones, and do I need a 4.4mm cable? A 6.35mm headphone can be used normally and does not need to be recabled. The 4.4mm balanced output provides the highest power—up to 1300mW + 1300mW at 32Ω—and is useful for compatible, less sensitive headphones. Choose low, medium or high gain according to headphone sensitivity and start with the volume low. Is the K11 R2R suitable for sensitive IEMs? It can be used with IEMs through the 6.35mm output and low gain, but the R2R model does not have the lowest noise figures in the K11 family. Extremely sensitive earphones may reveal more background noise than less sensitive headphones; buyers who consider silence between tracks the top priority should compare the standard K11. Can I use it with active speakers or an existing amplifier? Yes. Connect the rear RCA output to an amplifier or active speakers. Use LO for a fixed-level signal when another device controls volume, or PRE when you want the K11 R2R knob to control the output level. It has no XLR line output and cannot power passive speakers directly. Can I connect a television? Yes, through optical input when the television can output two-channel PCM. If there is no sound, change the TV’s digital-audio setting from Dolby or bitstream to PCM. The K11 R2R does not include HDMI ARC. Does it support Bluetooth or analog input? No. It has no Bluetooth receiver, Bluetooth transmitter or analog audio input. Available sources are USB-C, optical and coaxial digital audio. Can the coaxial socket work as a digital output? Yes, but only when USB is selected as the input. It is not a general-purpose digital pass-through for optical or coaxial input sources. Does it need a driver on Windows, Mac or a game console? Mac computers normally use USB Audio without an additional driver. Windows users may need FIIO’s USB driver for the highest sample rates and native DSD. UAC 1.0 mode improves compatibility with devices that do not support UAC 2.0, although the available formats may be reduced.HOW TO CONNECT Computer and wired headphones Source icon: ComputerSource: PC / MacConnection: USB-COutput connection: Headphone outputTarget icon: HeadphonesOutput: 6.35mm / 4.4mm Note: Select USB input, choose low, medium or high gain for the headphones, and begin with the volume low. TV and wired headphones Source icon: TVSource: TelevisionConnection: OpticalOutput connection: Headphone outputTarget icon: HeadphonesOutput: 6.35mm / 4.4mm Note: Set the television’s digital-audio output to two-channel PCM; Dolby or bitstream output may produce no sound. Digital source to amplifier or active speakers Source icon: Streaming ServiceSource: Computer / digital transportConnection: USB-C / optical / coaxialOutput connection: RCA LO / PRETarget icon: AmplifierOutput: Amplifier / active speakers Note: Use LO when the receiving device controls volume, or PRE when the K11 R2R controls volume. Passive speakers require an amplifier.Technical Specifications Feature Specification Product type Desktop DAC and headphone amplifier DAC architecture FiiO-developed four-channel fully differential 24-bit R2R resistor array Resistor network 192 precision thin-film resistors, 0.1% tolerance Operating modes NOS / OS System controller GD32F303RE USB receiver SA9312L Amplifier stage 2 × SGM8262 Volume control NJW1195A electronic volume controller USB-C decoding PCM up to 384kHz/32-bit; native DSD256 Optical decoding PCM up to 96kHz/24-bit Coaxial input decoding PCM up to 192kHz/24-bit USB Audio modes UAC 1.0 / UAC 2.0 Coaxial digital output Available only when USB is selected as the input Digital inputs USB-C, Toslink optical, coaxial RCA Headphone outputs 6.35mm single-ended; 4.4mm balanced Analog line output Stereo RCA Output modes PO: headphone output; PRE: variable RCA; LO: fixed-level RCA 6.35mm output power ≥660mW + 660mW at 16Ω; ≥460mW + 460mW at 32Ω; ≥50mW + 50mW at 300Ω Output impedance <1Ω 6.35mm SNR / noise floor ≥115dB A-weighted / <7.2μV A-weighted 6.35mm performance THD+N approx. 0.025%; dynamic range ≥107dB; crosstalk ≥72dB 4.4mm balanced output power ≥520mW + 520mW at 16Ω; ≥1300mW + 1300mW at 32Ω; ≥220mW + 220mW at 300Ω Output impedance <1.5Ω 4.4mm SNR / noise floor ≥115dB A-weighted / <14.1μV A-weighted 4.4mm performance THD+N approx. 0.025%; dynamic range ≥107dB; crosstalk ≥107dB RCA line output level 2.7Vrms RCA SNR / noise floor ≥115dB A-weighted / <5.1μV A-weighted RCA performance THD+N approx. 0.025% at 1kHz/10kΩ; dynamic range ≥107dB; crosstalk ≥111dB Power input DC 12V / 2A; no internal battery Dimensions 147 × 133 × 32.3mm Weight Approx. 420g What's in the box, manuals and downloads FiiO K11 R2R ×1 Power Adapter ×1 Power Cable ×1 USB Data Cable ×1 6.35mm Headphone Adapter ×1 Quick Start Guide ×1 Warranty Card ×1 Visit the EMiUZEK download center.
$139.49 - $175.99
-
Fiio FiiO BTR17
FiiO BTR17 is a flagship portable Bluetooth DAC and headphone amplifier designed for listeners who want high-quality wireless playback, powerful balanced output, and desktop-class USB DAC performance in one compact device. It combines the Qualcomm QCC5181 Bluetooth platform, dual ESS ES9069Q DACs, XMOS XU316 USB processing, and a four-channel fully balanced THX AAA 78+ amplifier architecture. Why it stands out Flagship Bluetooth 5.4 Platform The Qualcomm QCC5181 platform supports aptX Lossless, LDAC, aptX Adaptive, aptX HD, aptX, AAC, and SBC. Actual codec availability depends on the source device. Dual ESS ES9069Q DACs Two ES9069Q DAC chips use ESS fourth-generation 32-bit HyperStream architecture to deliver detailed sound, low distortion, and a clean background through both wired and wireless playback. THX AAA 78+ Balanced Amplification The four-channel fully balanced amplifier design provides controlled, low-distortion output through the 3.5mm single-ended and 4.4mm balanced headphone connections. Desktop Mode with up to 650mW + 650mW Connect a suitable 5V/2A external power supply to the dedicated POWER IN port and enable Desktop Mode to unlock up to 650mW + 650mW through the 4.4mm balanced output at 32Ω. Best for Listeners who want high-quality Bluetooth playback with wired headphone output Users of 4.4mm balanced headphones and demanding portable headphones Desktop users who want a compact USB DAC and headphone amplifier Android users with compatible LDAC, aptX Adaptive, or aptX Lossless devices Listeners who want customizable PEQ through the FiiO Control app Not ideal for Users looking for a standalone music player with internal storage Wireless headphones, which cannot be driven from its headphone outputs Buyers expecting aptX Lossless from every phone or computer Users who need maximum Desktop Mode power without an external USB power source EMiUZEK Buying Notes aptX Lossless requires a compatible source device; unsupported devices will use another available Bluetooth codec. The maximum 650mW + 650mW balanced output requires Desktop Mode, external 5V/2A power, high gain, and a 32Ω load. The 4.4mm balanced and 3.5mm single-ended outputs provide different power levels; confirm your headphone plug before ordering. BTR17 is a Bluetooth receiver and USB DAC/headphone amplifier, not a standalone player and not a Bluetooth transmitter. FAQ Can FiiO BTR17 be used without Bluetooth? Yes. Connect it to a compatible phone, tablet, or computer through USB and use it as a wired USB DAC and headphone amplifier. Does BTR17 support aptX Lossless? Yes, but the source device must also support aptX Lossless. Otherwise, BTR17 will use another mutually supported codec such as LDAC, aptX Adaptive, aptX HD, AAC, or SBC. What is the difference between normal and Desktop Mode? Normal operation prioritizes portability and battery use. Desktop Mode uses external power through the dedicated POWER IN port and provides substantially higher headphone output power. Can Desktop Mode avoid draining the phone battery? Yes. Use the data USB-C port for the phone or computer and connect external power to the separate orange POWER IN port. Can BTR17 drive full-size headphones? It can drive many portable and full-size headphones, especially through the 4.4mm balanced output in Desktop Mode. Required power still depends on headphone impedance and sensitivity. Does it support calls? Yes. BTR17 supports Bluetooth voice calls through its built-in omnidirectional microphone and compatible CTIA in-line microphones. HOW TO CONNECT Bluetooth Headphone Setup Source icon: Smartphone Source: Android / iPhone / Tablet Connection: Bluetooth Output connection: 3.5mm / 4.4mm Balanced Target icon: Headphones Output: Wired Headphones / Earphones Note: The selected Bluetooth codec depends on the source device. USB DAC with Smartphone Source icon: Smartphone Source: USB-C Smartphone / Tablet Connection: USB-C Data Cable Output connection: 3.5mm / 4.4mm Balanced Target icon: Headphones Output: Wired Headphones / Earphones Note: Select PHONE mode to reduce power draw from the connected mobile device. Desktop USB DAC Setup Source icon: Computer Source: Windows / macOS Computer Connection: USB-C Data Output connection: 3.5mm / 4.4mm Balanced Target icon: Headphones Output: Desktop Headphone System Note: Connect a 5V/2A power supply to POWER IN and enable Desktop Mode for maximum output. Car Audio Setup Source icon: Smartphone Source: Smartphone Connection: Bluetooth Output connection: 3.5mm Line Connection Target icon: Car Audio Output: Vehicle Audio System Note: In-vehicle mode supports automatic power-on and power-off with the vehicle USB supply. Technical Specifications Feature Specification Bluetooth platform Qualcomm QCC5181 Bluetooth version Bluetooth 5.4 Bluetooth codecs aptX Lossless, LDAC, aptX Adaptive, aptX HD, aptX, AAC, SBC DAC Dual ESS ES9069Q USB controller XMOS XU316 Amplifier architecture Four-channel fully balanced THX AAA 78+ Maximum USB decoding PCM up to 32-bit/768kHz; native DSD512; DoP256 Headphone outputs 3.5mm single-ended; 4.4mm balanced Balanced output, Desktop Mode ≥650mW + 650mW at 32Ω Balanced output, normal mode ≥300mW + 300mW at 32Ω 3.5mm output, Desktop Mode ≥280mW + 280mW at 32Ω 3.5mm output, normal mode ≥140mW + 140mW at 32Ω Display 1.3-inch color IPS display EQ 10-band high-precision parametric EQ Power input DC 5V/2A or higher Charging time Approximately 2 hours or less Bluetooth battery life Approximately 9 hours through 3.5mm; approximately 8 hours through 4.4mm under FiiO test conditions Dimensions Approximately 86.6 × 41.2 × 16.3mm Weight Approximately 73.4g Available colors Black / Blue What's in the box, manuals and downloads FiiO BTR17 ×1 USB cable ×1 Protective case ×1 Quick start guide and product documentation Package contents may vary by production batch or region Visit the official FiiO support and download center for firmware, drivers, and manuals Additional Product Content Choosing the correct operating mode Mode Recommended use Power arrangement BT Wireless listening from a phone or tablet Uses the internal battery PHONE Wired USB DAC use with a smartphone Reduces power demand on the phone PC USB DAC use with a computer Powered through the data USB connection Desktop Mode Maximum headphone output at a desk Requires external power through POWER IN
$199.00
-
IEAST iEAST AMP80
iEAST AMP80 is a compact high-power network streaming amplifier that directly drives passive speakers and integrates a powered subwoofer. With 2 × 80W into 4Ω, wired and wireless streaming, Bluetooth, analog and coaxial inputs, it is suited to stronger two-channel and 2.1 systems. Why it stands out 2 × 80W compact speaker power Provides substantially more output than entry-level mini streaming amplifiers. Integrated 2.1 system support Stereo speaker outputs and a dedicated line-level subwoofer output simplify a compact 2.1 setup. Three network and wireless paths Wi-Fi, Ethernet and Bluetooth accommodate convenient or installation-grade connectivity. Useful local source inputs Analog and coaxial inputs add televisions, disc players and other stereo sources. Best for Bookshelf and floorstanding speaker systems 2.1 living-room audio Higher-output multi-room zones TV audio through stereo coaxial output Users replacing separate streamer and amplifier Not ideal for Users requiring HDMI ARC Passive subwoofers Balanced XLR systems Headphone listening Product Details and Connection Views EMiUZEK Buying Notes AMP80 directly drives compatible 4Ω/8Ω passive speakers. Sub out requires a powered subwoofer. For TV connection, use stereo PCM from a compatible coaxial or analog output. Frequently asked questions Can it drive passive speakers? Yes, with 2 × 80W into 4Ω and 2 × 65W into 8Ω under official conditions. Can it connect a subwoofer? Yes, connect an active subwoofer to SUB OUT. Does it have HDMI ARC? No. Does it support Bluetooth? Yes, Bluetooth 5.0 SBC. Can it use Ethernet? Yes, 10/100 Ethernet is supported. Can it connect to a TV? Yes through compatible analog or coaxial stereo PCM output. HOW TO CONNECT Stereo speaker system Source: Streaming servicesConnection: Wi-Fi or EthernetOutput connection: Speaker outputTarget: Passive speakers 2.1 system Source: Network or local sourceConnection: Wi-Fi, Bluetooth, AUX or coaxialOutput connection: Speaker output + sub outTarget: Passive speakers + active subwoofer TV audio system Source: TelevisionConnection: Coaxial PCM or AUXOutput connection: Speaker outputTarget: Passive speakers Technical Specifications Feature Specification Product type Wireless multi-room stereo amplifier Power into 4Ω 2 × 80W at 1% THD+N Power into 8Ω 2 × 65W at 1% THD+N Inputs 2.4GHz Wi-Fi, Bluetooth 5.0, AUX, coaxial Network 10/100 Ethernet Outputs Stereo speaker output; active-subwoofer output DAC ESS9023 Streaming DLNA, AirPlay, Spotify Connect, QPlay SNR 90dB THD+N <0.1% Power 32V/4.75A Dimensions 136 × 134.8 × 40mm Weight 0.32kg Additional Product Content 📊 Comparison: Which iEAST Streaming Amplifier Is Right for You? Choose AMP80 for compact high-output 2.1 audio; choose AMP50 for lower-cost flexible stereo, or eAMP 2 Pro for reference power, dual-band networking and rack integration. Feature AudioCast AMP50 iEAST AMP80 iEAST eAMP 2 Pro Power 2 × 50W/4Ω 2 × 80W/4Ω 2 × 150W/8Ω Subwoofer output No dedicated output Yes Yes Wi-Fi 2.4GHz 2.4GHz Dual-band Wi-Fi 5 Rack/custom control Basic integration TCP/IP/IR 1U, RS232, triggers, IR Best use Flexible compact stereo Powerful compact 2.1 High-end custom installation
$181.05 - $199.00
-
Fosi Audio Fosi Audio MC351
Fosi Audio MC351 is a compact 2.1-channel integrated digital amplifier for passive stereo speakers and a passive subwoofer.Dual TI TPA3255 amplifier chips, broad digital and analog inputs and up to 165W × 2 + 350W at 4Ω make it a practical control center for powerful 2.1 systems.Why it stands outDedicated 2.1 amplificationSeparate stereo and passive-subwoofer amplification builds a complete 2.1 system without a second power amp.Dual TPA3255 architectureTwo TI TPA3255 amplifier chips provide high output for speakers and a passive subwoofer.Broad source compatibilityBluetooth 5.3, USB, optical, coaxial and RCA inputs cover common music, computer and TV sources.System expansion through pre-outThe pre-out connection supports a powered subwoofer or compatible downstream equipment.Best for Passive bookshelf or floorstanding speaker systems 2.1 systems using a passive subwoofer TV and desktop systems using optical, coaxial or USB audio Users who need both wireless and wired source inputs Not ideal for Users needing HDMI ARC or TV-remote CEC control Headphone-only systems Turntables without a built-in or external phono preamp EMiUZEK Buying Notes MC351 directly powers passive speakers and a passive subwoofer; these are different from line-level active speakers. USB is an audio-data input, not a power input. RCA is line level and does not replace a phono preamp for a standard turntable. Frequently asked questionsCan MC351 drive passive speakers?Yes. It is designed for 4–8Ω passive speakers.Can it power a passive subwoofer?Yes. It has a dedicated amplified passive-subwoofer output.Can I connect a powered subwoofer?Yes. Use the line-level pre-out with a compatible powered subwoofer.Does it support HDMI ARC?No. Use optical, coaxial or RCA audio from a television.What does the USB port do?It receives USB digital audio from a compatible computer or source; it does not power the amplifier.Can I connect a turntable?Only if the turntable has a built-in phono preamp or you add an external phono preamp.HOW TO CONNECT2.1 passive speaker systemSource: Computer, streamer or TVConnection: USB, optical, coaxial, RCA or BluetoothOutput: Speaker terminals + passive-subwoofer outputTarget: Passive speakers + passive subwooferNote: Match speaker impedance and begin with low volume.Stereo speaker systemSource: Any supported digital or analog sourceConnection: Chosen inputOutput: Left/right speaker terminalsTarget: 4–8Ω passive speakersNote: Leave the passive-subwoofer output unused for a 2.0 system.System with powered subwooferSource: Any supported sourceConnection: Chosen inputOutput: Speaker terminals + pre-outTarget: Passive speakers + powered subwooferNote: Set crossover and level on the powered subwoofer.Technical SpecificationsCore specifications Feature Specification Product type 2.1-channel integrated digital amplifier Amplifier chips TI TPA3255 × 2 Maximum output 165W × 2 + 350W at 4Ω Speaker impedance 4–8Ω THD ≤0.03% SNR / Dynamic range ≥100dB / ≥100dB Power input range DC 24–48V Inputs and outputs Feature Specification Inputs Bluetooth 5.3, USB, optical, coaxial, RCA Outputs Passive speakers, passive subwoofer, pre-out USB sampling Up to 24-bit / 96kHz Optical / coaxial sampling Up to 32-bit / 192kHz Frequency response 20Hz–20kHz (±0.5dB) Subwoofer output range 20Hz–250Hz Recommended System Setup Setup Connection 2.1 passive system Source → MC351 → Passive speakers + passive subwoofer TV system TV optical output → MC351 → Passive speakers Powered sub expansion Source → MC351 → Passive speakers + pre-out → Powered subwoofer Additional Product ContentFosi Audio product comparisonCompare the two compact Fosi Audio integrated amplifiers by their power, output structure and intended system layout. Feature MC351 MC331 Product position High-power 2.1 digital integrated amplifier Tube DAC / integrated stereo amplifier Built-in speaker amplifier Yes Yes Maximum output 165W × 2 + 350W at 4Ω 105W × 2 at 4Ω Main inputs Bluetooth 5.3, USB, optical, coaxial, RCA Bluetooth, USB, optical, coaxial, RCA Speaker output Stereo passive speakers Stereo passive speakers Passive subwoofer output Yes, dedicated amplified output No Line-level pre-out Yes Yes Headphone output No Yes, 3.5mm Tube stage No Yes, replaceable tubes Best use Powerful passive-speaker 2.1 system Compact tube stereo and headphone system
$169.90
-
Fosi Audio Fosi Audio ZD3
Fosi Audio ZD3 is a fully balanced desktop DAC and preamplifier for computers, televisions, wireless sources and dedicated digital transports.The ES9039Q2M platform, HDMI ARC, USB, Bluetooth, XLR/RCA outputs and bypass mode make it a versatile digital hub for modern HiFi systems.Why it stands outFour reasons this product deserves a place in a well-planned audio system.ES9039Q2M Balanced ConversionThe flagship ESS DAC architecture supports high-resolution decoding and balanced analog output.HDMI ARC for Television AudioConnect a compatible TV directly and control a stereo system without relying on a separate AV receiver.Variable or Fixed OutputUse preamp mode for direct volume control or bypass mode for a fixed-level connection to another preamplifier.Trigger and Remote Integration12V trigger input/output, OLED display and remote control streamline everyday system operation.Best for TV-to-HiFi upgrades using HDMI ARC Balanced power amplifiers such as ZA3 or V3 Mono Computer USB audio systems Bluetooth and multi-source digital systems Active speakers with XLR or RCA input Not ideal for Users needing built-in speaker amplification Headphone listeners without a separate headphone amplifier Analog-only sources such as a turntable Systems requiring Wi-Fi network streaming apps inside the DAC EMiUZEK Buying Notes ZD3 is a DAC/preamp, not a speaker power amplifier; connect it to active speakers or a separate amplifier. Use bypass only when downstream equipment provides volume control, because bypass sends fixed-level output. HDMI is ARC audio input rather than a general HDMI video switch or HDMI output. Frequently Asked QuestionsCan the ZD3 drive passive speakers?No. Connect its XLR or RCA output to a power amplifier before passive speakers.Can it connect directly to a television?Yes, through a compatible HDMI ARC connection. Configure the television for supported digital audio output.Does it have a headphone output?No. Add a separate headphone amplifier if headphone listening is required.Can it connect to active speakers?Yes. Use XLR or RCA output and operate the ZD3 in preamp mode for volume control.What is bypass mode?It bypasses variable preamp control and sends fixed-level output to a downstream preamp or integrated amplifier.Does Bluetooth transmit to headphones?No. Bluetooth is an input for receiving audio from a source device.Does it support high-resolution USB audio?Yes, up to PCM 32-bit/768kHz and DSD512 over USB with compatible hardware and software.HOW TO CONNECTTV stereo systemSource: TelevisionConnection: HDMI ARCOutput: XLR or RCATarget: Power amplifier or active speakersNote: Select a compatible PCM output setting on the TV if required.Computer audioSource: PC / MacConnection: USBOutput: XLR or RCATarget: Power amplifier, headphone amp or active speakersNote: Some Windows configurations require the Fosi USB driver.Wireless audio systemSource: Phone / tabletConnection: Bluetooth 5.0Output: XLR or RCATarget: Amplifier or active speakersNote: Bluetooth is receive-only on the ZD3.Technical SpecificationsCore Architecture Feature Specification Product Type Balanced DAC / preamplifier DAC ESS ES9039Q2M USB Interface XMOS XU316 Bluetooth Chip QCC3031 Op-Amp LME49720; swappable design Digital Audio Feature Specification USB Maximum PCM 32-bit/768kHz; DSD512 Optical / Coaxial Maximum PCM 24-bit/192kHz Bluetooth Maximum PCM 24-bit/48kHz Bluetooth Codecs aptX HD, aptX, AAC, SBC Bluetooth Version 5.0 Inputs and Outputs Feature Specification Inputs USB, HDMI ARC, coaxial, optical, Bluetooth Outputs Balanced XLR; RCA XLR Output Level 5Vrms RCA Output Level 2.5Vrms Trigger 12V trigger input and output Measured Performance Feature Specification SINAD 126dB SNR ≥126dB THD+N <0.00008% Dynamic Range ≥123dB Noise Floor ≤2μV Power Supply DC 12V/1.5A Recommended System Setup Setup Connection TV HiFi TV → HDMI ARC → ZD3 → amplifier → passive speakers Balanced desktop Computer → USB → ZD3 → XLR active speakers Wireless system Phone → Bluetooth → ZD3 → amplifier or active speakers Additional Product Content Feature ZD3 ZH3 GR40 Product Position Balanced DAC / preamp DAC / headphone amp / preamp Tube DAC / headphone amp DAC Chip ES9039Q2M AKM AK4493SEQ Not specified USB Maximum PCM 768kHz / DSD512 PCM 768kHz / DSD512 Product-dependent lower tier HDMI ARC Yes No No Bluetooth Input Yes No Yes Headphone Output No 4.4mm, 6.35mm 3.5mm Analog Input No RCA No Balanced Line Output XLR XLR No Remote Control Yes Yes No Best Use TV and balanced amplifier hub Complete desktop/headphone hub Compact tube-flavoured desktop audio
$179.90
-
Fosi Audio Fosi Audio K7
Fosi Audio K7 is a fully balanced desktop DAC and headphone amplifier designed for HiFi listening, gaming and communication.AK4493SEQ conversion, USB/optical/coaxial/Bluetooth inputs, microphone support and powerful 3.5mm and 4.4mm outputs make it a comprehensive desktop audio hub.Why it stands outFully balanced high-output designThe 4.4mm output provides at least 2.1W + 2.1W at 32Ω for compatible headphones.Audiophile digital architectureCombines an AK4493SEQ DAC, XMOS XU208 USB processor and TPA6120 headphone amplification.Gaming and microphone featuresA microphone input with noise reduction and physical EQ controls support gaming and online communication.Extensive source connectivityAccepts USB-C, optical, coaxial and Bluetooth aptX HD/LL sources.Best for Desktop HiFi headphone systems PC and console gaming TVs and projectors with digital output Powered speakers or amplifiers using RCA Not ideal for Directly driving passive speakers Portable battery-powered use Users requiring HDMI ARC EMiUZEK Buying Notes The 4.4mm output requires correctly wired balanced headphones; do not use an unsafe single-ended adapter. RCA is a line-level output for powered speakers or amplifiers, not passive speakers. Microphone compatibility and console operation depend on the selected input mode and system settings. Frequently asked questionsWhat is the maximum headphone output?The balanced output is rated at ≥2.1W + 2.1W at 32Ω; the 3.5mm output is ≥600mW + 600mW at 32Ω.Does K7 support Bluetooth?Yes, including aptX HD and aptX LL.Can it connect to a TV?Yes, through compatible optical or coaxial PCM output.Can it power passive speakers?No. Use its RCA output with powered speakers or a power amplifier.Does it support microphones?Yes, through the 3.5mm microphone input and compatible system setup.What is the maximum USB resolution?PCM up to 32-bit/384kHz and DSD256.HOW TO CONNECTPC gaming and communicationSource icon: computerSource: PC / MacConnection: USB-C audio + microphoneOutput connection: 3.5mm or 4.4mm headphone outputTarget icon: headphonesOutput: Gaming headset / headphonesTV headphone systemSource icon: tvSource: TV / projectorConnection: Optical or coaxial PCMOutput connection: Headphone outputTarget icon: headphonesOutput: Wired headphonesPowered speaker systemSource icon: streamerSource: PC / streamer / Bluetooth deviceConnection: USB, digital or BluetoothOutput connection: RCA line outputTarget icon: speakersOutput: Powered speakers or amplifierTechnical SpecificationsDigital architecture Feature Specification DAC AKM AK4493SEQ USB processor XMOS XU208 Headphone amplifier TPA6120 Maximum resolution PCM 32-bit / 384kHz; DSD256 Inputs USB-C; optical; coaxial; Bluetooth; 3.5mm microphone Outputs and performance Feature Specification Outputs 3.5mm single-ended; 4.4mm balanced; RCA 3.5mm rated output ≥600mW + 600mW @ 32Ω 4.4mm rated output ≥2.1W + 2.1W @ 32Ω SNR ≥121dB THD+N ≤0.0002% Power input DC 12V Additional Product ContentComparison: Which Fosi Audio model is right for you? Model K5 Pro Q4 K7 Primary use Gaming DAC with microphone Simple desktop DAC/headphone amp Premium HiFi and gaming DAC Inputs USB, optical, coaxial, microphone USB, optical, coaxial USB, optical, coaxial, Bluetooth, microphone Headphone output 3.5mm 3.5mm 3.5mm and 4.4mm balanced Maximum USB playback 24-bit / 96kHz 24-bit / 96kHz 32-bit / 384kHz; DSD256 Best use Budget gaming communication Basic music and TV upgrade High-output balanced desktop system
$111.48 - $199.90
-
Questyle Questyle M15i
Questyle M15i is a compact USB DAC and headphone amplifier designed to upgrade wired listening from phones, tablets and computers.Questyle Current Mode amplification, high-resolution decoding and 3.5mm single-ended and 4.4mm balanced provide a focused portable HiFi solution without an internal battery.Why it stands outFour core reasons to choose this Questyle model.Current Mode AmplificationQuestyle's patented amplification architecture is designed for wide bandwidth, fast transient response and low distortion.High-Resolution USB DecodingESS ES9281AC supports high-resolution playback from compatible USB sources.Practical Headphone Connectivity3.5mm single-ended and 4.4mm balanced cover the intended wired headphone and IEM connections.Portable, Bus-Powered DesignThe compact unit draws power from the connected source and requires no separate charging routine.Best for Portable wired headphone listening USB-C phone and tablet audio Laptop and desktop headphone systems High-resolution local or streaming playback Not ideal for Wireless Bluetooth headphone users Users needing speaker power amplification Headsets requiring microphone pass-through Listeners needing an internal battery EMiUZEK Buying Notes Questyle M15i is a USB DAC/headphone amplifier, not a music player or speaker amplifier. USB cable compatibility depends on the source device; iPhone connection requirements vary by connector generation. Start with low gain and low volume when using sensitive IEMs. Frequently Asked QuestionsCan it drive passive speakers?No. It is designed for wired headphones and IEMs.Does it support Bluetooth?No. Audio input is through USB.Does it need charging?No internal battery is used; it is powered by the connected source.Can I use it with an iPhone?Yes with the appropriate compatible cable; MFi support applies where specified for the model.Does it support headset microphones?The headphone outputs are for audio playback and do not provide microphone pass-through.Can it work with a computer?Yes, through a compatible USB connection and operating-system audio output selection.HOW TO CONNECTUSB-C phoneSource: Phone / tabletConnection: USB-COutput: Headphone outputTarget: Wired IEMs or headphonesNote: Select the Questyle device as audio output if needed.Computer audioSource: PC / MacConnection: USBOutput: Headphone outputTarget: Wired headphonesNote: Use a compatible data cable, not a charge-only cable.Portable streamerSource: USB-capable digital playerConnection: USBOutput: Headphone outputTarget: Wired IEMsNote: Begin playback at low volume.Technical Specifications Feature Specification Product Type Portable USB DAC / headphone amplifier DAC ESS ES9281AC Amplification Questyle Current Mode USB Input USB Type-C Headphone Outputs 3.5mm single-ended and 4.4mm balanced Power USB bus powered Maximum PCM 32-bit/384kHz DSD DSD256 Gain High / low Apple Certification MFi Recommended System Setup Setup Connection Mobile Phone → USB → M15i → wired headphones Computer PC/Mac → USB → M15i → headphones Portable player USB digital player → M15i → IEMs Additional Product Content Feature M12i M15i M15C M18i Position Compact single-ended Premium dual-output USB-C dual-output Flagship mobile Headphone Outputs 3.5mm 3.5mm + 4.4mm 3.5mm + 4.4mm 3.5mm + 4.4mm Gain Control Automatic High / low High / low Model controls Best Use Simple portable setup Premium iOS/USB listening USB-C ecosystem Flagship portable system
$249.00 $198.55
-
Arylic Arylic A50+
Arylic A50+ is a compact WiFi streaming amplifier designed to bring modern wireless streaming and powerful amplification to passive speaker systems. With 50W × 2 stereo output, WiFi streaming, Bluetooth 5.0, USB audio support, optical input, and multi-room capability, A50+ allows you to transform traditional passive speakers into a smart wireless audio system. Why it stands out Powerful Compact Streaming Amplifier A50+ combines wireless streaming and stereo amplification in one compact device. 50W × 2 stereo output Directly powers passive speakers Class D amplification Compact installation design Flexible Wireless Music Playback Stream music from your favorite sources: WiFi streaming AirPlay Spotify Connect DLNA / UPnP Bluetooth 5.0 Multiple Audio Connections A50+ supports different audio sources through: Optical input RCA analog input USB audio connection USB storage playback Subwoofer output Multi-Room Audio Expansion Build a flexible whole-home audio system by connecting multiple compatible Arylic streaming devices. Control music playback through supported apps and enjoy synchronized audio in different rooms. Best for Bookshelf speaker systems Ceiling speaker installations Bedroom and office audio systems Multi-room home audio setups Users upgrading traditional passive speakers Not ideal for Users needing HDMI ARC TV connection Users looking for phono input for turntables Users requiring high-power amplification for large rooms Users wanting a separate high-end amplifier system EMiUZEK Buying Notes Arylic A50+ is a streaming amplifier with built-in speaker amplification. Passive speakers can be connected directly without an additional power amplifier. A50+ is designed for small to medium speaker systems. For turntables, a separate phono preamplifier is required. For TV systems requiring HDMI ARC, consider an amplifier with HDMI support. FAQ Can Arylic A50+ directly power passive speakers? Yes. A50+ includes a built-in stereo amplifier and can directly drive passive speakers without requiring an additional amplifier. Typical setup: Streaming Source → A50+ → Passive Speakers What speakers are suitable for Arylic A50+? A50+ is suitable for bookshelf speakers, ceiling speakers, and compact home stereo systems. It supports: 50W × 2 at 4Ω 30W × 2 at 8Ω Can Arylic A50+ connect to a computer? Yes. A50+ supports USB audio connection, allowing it to work with computers as a compact desktop audio amplifier. Can Arylic A50+ play music from USB storage? Yes. The USB port supports playback from compatible USB storage devices. Does Arylic A50+ support WiFi streaming? Yes. A50+ supports wireless streaming through compatible platforms including AirPlay, Spotify Connect, DLNA, and UPnP. Can Arylic A50+ connect to a subwoofer? Yes. A50+ includes a dedicated subwoofer output for connecting compatible powered subwoofers. Does Arylic A50+ support multi-room audio? Yes. Multiple compatible Arylic devices can be combined into a multi-room audio system through supported applications. Can Arylic A50+ replace a traditional amplifier? Yes. A50+ combines streaming functionality and amplification, allowing traditional passive speakers to become part of a modern wireless audio system. HOW TO CONNECT Passive Speaker Setup Source icon: streamerSource: Streaming ServicesConnection: WiFi / BluetoothOutput connection: Speaker OutputTarget icon: speakersOutput: Passive Speakers Note: Use A50+ as a complete wireless streaming amplifier. Computer Audio Setup Source icon: computerSource: PC / MacConnection: USB AudioOutput connection: Speaker OutputTarget icon: speakersOutput: Passive Speakers Note: Use A50+ for desktop audio playback. TV / External Source Setup Source icon: TV / Audio DeviceSource: Optical / RCA OutputConnection: Optical / RCA CableOutput connection: Speaker OutputTarget icon: speakersOutput: Passive Speakers Note: Connect external audio devices through digital or analog inputs. Subwoofer Setup Source icon: amplifierSource: A50+Connection: Subwoofer OutputTarget icon: subwooferOutput: Powered Subwoofer Note: Expand your stereo system with additional bass performance. Technical Specifications Amplifier Feature Specification Amplifier Type Class D Stereo Amplifier Amplifier Chip TPA3116 Output Power 50W × 2 @ 4Ω Output Power 30W × 2 @ 8Ω Speaker Impedance 4Ω–8Ω Streaming & Connectivity Feature Specification Streaming Protocols AirPlay, Spotify Connect, DLNA, UPnP Network WiFi 2.4GHz Ethernet RJ45 10/100M Bluetooth Bluetooth 5.0 SBC/AAC Multi-Room Supported Audio Inputs Feature Specification Analog Input RCA Digital Input Optical USB Audio Micro USB DAC USB Host USB Storage Playback Audio Outputs Feature Specification Speaker Output Passive Speakers Subwoofer Output Yes Audio Performance Feature Specification Audio Resolution Up to 24-bit / 192kHz Supported Formats FLAC, MP3, AAC, AAC+, ALAC, APE, WAV Frequency Response 20Hz–20kHz THD+N 0.03% SNR 91dB General Feature Specification Power Input DC 12V–24V Control App / Remote Control Dimensions 116.2 × 64 × 22.6 mm Recommended System Setup Setup Connection A50+ + Passive Speakers Streaming → A50+ → Speakers A50+ + Computer PC → USB → A50+ → Speakers A50+ + Subwoofer A50+ → Speakers + Powered Subwoofer A50+ Multi-Room Multiple Arylic Devices → App Control What's in the box Arylic A50+ ×1 Remote Control ×1 24V Power Adapter ×1 WiFi Antenna ×1 Bluetooth Antenna ×1 RCA Cable ×1 Speaker Connector ×1 User Manual ×1 EMIUZEK Download Center Access product manuals, firmware updates, and additional support resources. Arylic A50+ manuals and downloads: https://emiuzek.com/pages/download Additional Product Content Arylic A50+ vs Arylic A30+ vs Arylic LA50 Feature Arylic A50+ Arylic A30+ Arylic LA50 Product Position Streaming Amplifier Compact Mini Streaming Amplifier Modern Streaming Amplifier Output Power 50W × 2 30W × 2 50W × 2 Main Focus Home speaker systems Desktop and small rooms Flexible stereo systems Bluetooth Bluetooth 5.0 Bluetooth 5.0 Bluetooth 5.4 Optical Input Yes No Yes USB Audio Yes Yes Yes Subwoofer Output Yes No Yes HDMI ARC No No Yes Best Use Bookshelf / ceiling speakers Desktop audio Living room stereo
$176.00 - $209.00
-
sonos Sonos Arc/Sonos Arc ultra Wall Mount
Create a cleaner home-theatre installation by mounting Sonos Arc or Arc Ultra directly beneath the TV. Select the correct soundbar option and follow Sonos clearance guidance so the upward- and side-firing drivers remain unobstructed.Why it stands outTwo model selectionsChoose the dedicated Arc or Arc Ultra option shown in the variants.Acoustic clearancePurpose-built placement helps preserve space around the soundbar’s directional drivers.Low-profile lookPositions the soundbar close to the wall without using a media console.Cable accessPower, HDMI and network connections remain reachable.Best for Sonos Arc or Arc Ultra Wall-mounted televisions Dolby Atmos rooms Minimal media-console setups Permanent home-theatre installations Not ideal for Sonos Beam or Ray TV mounts that need the soundbar to move with the screen Installations with obstructed soundbar ends Walls unsuitable for the required load EMiUZEK Buying Notes Select Arc Wall Mount or Arc Ultra Wall Mount; verify the exact product before ordering. Soundbar is not included. For Arc Ultra, Sonos recommends at least 4 in / 10 cm between the soundbar and TV and 1 ft / 30 cm from each end to an obstruction. FAQDoes the Arc mount fit Arc Ultra?Sonos states Arc Ultra is compatible with the Sonos Arc Wall Mount, but choose the listed model option that best matches your installation.Is the soundbar included?No. This listing is for the selected wall mount.How much clearance does Arc Ultra need?Sonos recommends at least 4 in / 10 cm from the TV and 1 ft / 30 cm from each end to walls or obstructions.Can it be installed above a TV?Sonos permits above-TV installation, though below-TV placement is recommended.Does it attach to a moving TV mount?No. A direct wall bracket remains fixed; choose a TV-mount soundbar bracket if synchronized movement is required.Can I hide the cables?Plan an approved in-wall or surface cable route before installation; do not place the power cord inside a wall unless locally permitted.Will wall mounting change the sound?Correct clearance is essential; run Trueplay after changing placement.What wall hardware should I use?Use fixings appropriate to wood stud, drywall, plaster, concrete or brick as applicable.HOW TO CONNECT Plan clearance — Centre the soundbar and mark the bracket while maintaining the required TV and side clearances. Secure bracket — Drill and install wall-specific anchors or stud fixings, then level the bracket. Attach and connect — Mount Arc or Arc Ultra, connect power and HDMI eARC/ARC, then run Sonos setup and Trueplay. Technical Specifications Feature Specification Compatible products Sonos Arc or Sonos Arc Ultra, according to selected variant Product type Fixed soundbar wall mount Soundbar included No Recommended position Below TV; above TV also supported Arc Ultra TV clearance Minimum 4 in / 10 cm Arc Ultra end clearance Minimum 1 ft / 30 cm from each end to obstruction Controls orientation Facing upward Connections retained Power, HDMI eARC/ARC, Ethernet Installation surfaces Depends on wall-specific fixings Adjustment Fixed after installation Use Indoor Additional Product Content
$99.00
-
Fiio FiiO ECHO music player
SNOWSKY ECHO is a compact high-resolution portable music player designed for users who enjoy a simple and dedicated music experience. With dual headphone outputs, Bluetooth connectivity, USB DAC functionality, and microSD expansion, ECHO combines retro-inspired design with modern portable HiFi features. Why it stands out Dedicated Music Experience ECHO focuses on pure music playback without unnecessary smartphone distractions, giving users a simple and focused listening experience. High-Resolution Portable Audio Supports lossless music playback with high-quality decoding capability for detailed and natural sound performance. Dual Headphone Connections The 3.5mm single-ended and 4.4mm balanced outputs provide flexible compatibility with different headphones and earphones. Retro Design with Modern Features Combines a nostalgic music player design with modern functions including Bluetooth, USB DAC, and customizable EQ. Best for Portable HiFi listening IEM and headphone users Local music library playback Travel and commuting Users wanting a distraction-free music player Not ideal for Users needing Spotify or streaming apps Users looking for Android-based smart players Users needing powerful desktop headphone amplification Users wanting a network streamer EMiUZEK Buying Notes SNOWSKY ECHO is a portable music player, not a smartphone-based streaming device. It is designed mainly for local music playback through microSD storage. It can also work as a USB DAC when connected to compatible computers or devices. Performance depends on the connected headphones or earphones. FAQ Does SNOWSKY ECHO support Bluetooth? Yes. It supports Bluetooth connectivity for wireless audio functions and compatible devices. Can SNOWSKY ECHO play music without a smartphone? Yes. ECHO is designed as a standalone music player using local music files stored on supported memory cards. Does SNOWSKY ECHO support microSD cards? Yes. It supports expandable storage through a microSD card for storing music files. Does SNOWSKY ECHO support balanced headphones? Yes. It includes a 4.4mm balanced headphone output in addition to the 3.5mm single-ended output. Can SNOWSKY ECHO be used as a USB DAC? Yes. It can connect to computers and compatible devices as a USB DAC. Does SNOWSKY ECHO support streaming apps like Spotify? No. ECHO is designed as a dedicated local music player rather than an Android streaming player. What headphones work best with SNOWSKY ECHO? It works well with IEMs, portable headphones, and efficient headphones suitable for portable devices. HOW TO CONNECT Portable Music Setup Source icon: microSD CardSource: Local Music FilesConnection: Internal PlaybackOutput connection: 3.5mm / 4.4mm Headphone OutputTarget icon: Headphones / IEMsOutput: Portable HiFi Listening Note: Enjoy dedicated music playback anywhere. Wireless Audio Setup Source icon: SNOWSKY ECHOSource: Local Music LibraryConnection: BluetoothTarget icon: Bluetooth DeviceOutput: Wireless Audio System Note: Connect with compatible Bluetooth devices. USB DAC Setup Source icon: ComputerSource: Digital MusicConnection: USBOutput connection: Headphone OutputTarget icon: HeadphonesOutput: USB DAC Audio System Note: Use ECHO as an external audio device. Technical Specifications Audio Feature Specification Product Type Portable High-Resolution Music Player DAC High-Performance DAC System Audio Playback Lossless Music Playback EQ Supported Outputs Feature Specification 3.5mm Output Supported 4.4mm Balanced Output Supported USB DAC Output Supported Storage & Connectivity Feature Specification microSD Expansion Supported Bluetooth Supported USB-C Supported Firmware Update Supported General Feature Specification Product Type Portable Music Player Display Color Display Battery Built-in Rechargeable Battery Recommended System Setup Setup Connection IEM Listening ECHO → IEM Portable Headphone ECHO → Headphones USB DAC Mode Computer → ECHO → Headphones Bluetooth System ECHO → Wireless Device What's in the box SNOWSKY ECHO ×1 USB-C Cable ×1 Protective Accessories ×1 User Manual ×1 Download Center Access product manuals, technical documents, and support resources. https://emiuzek.com/pages/download Additional Product Content SNOWSKY Portable Player Comparison Feature ECHO ECHO MINI Product Position Portable HiFi Music Player Compact Entry-Level Music Player Main Focus Higher-performance portable audio Small retro music player Balanced Output Yes Yes USB DAC Yes Yes microSD Expansion Yes Yes Best Focus Portable HiFi enthusiasts Simple everyday music playback
$66.99 - $79.00
-
audio-technica Audio-Technica AT-VM520xEB
Audio-Technica AT-VM520xEB is a dual moving magnet stereo cartridge with a bonded elliptical stylus.Its updated AT-VMx generator, PCUHD coils, and elliptical profile provide balanced detail and dependable tracking for everyday HiFi vinyl systems.Why it stands outBonded Elliptical StylusProvides more precise groove contact than a conical stylus for balanced detail and reliable record playback.Updated AT-VMx GeneratorPCUHD coils and dual-magnet construction support responsive dynamics and clean stereo reproduction.Threaded Cartridge BodyM2.6 threaded inserts simplify installation on compatible through-hole headshells and tonearms.Interchangeable Stylus SystemAccepts compatible stereo AT-VMx replacement styli for maintenance or future upgrades.Best for Everyday HiFi vinyl listening Upgrading a compatible 1/2-inch-mount turntable Listeners moving beyond a conical stylus MM phono systems Not ideal for P-mount turntables Users wanting a cartridge pre-mounted on a headshell Systems without an MM phono input or external MM phono stage EMiUZEK Buying Notes AT-VM520xEB is a cartridge only; a headshell is not included. It requires a compatible 1/2-inch mount and an MM phono input or external MM phono stage. Set tracking force to 1.8–2.2 g, with 2.0 g standard, and complete cartridge alignment before use. FAQDoes it include a headshell?No. This is the cartridge-only version.What phono stage does it require?Use an MM input with 47 kΩ load impedance and 150–250 pF load capacitance.Can it be used on a P-mount turntable?No. It is designed for compatible 1/2-inch mounting systems.What is the tracking force?1.8–2.2 g, with 2.0 g standard.What is the direct replacement stylus?AT-VMN20xEB, sold separately.Can other AT-VMx styli be used?Compatible stereo AT-VMx replacement styli can be used; mono models are excluded.HOW TO CONNECTStandard Turntable SetupSource icon: deviceSource: Vinyl RecordConnection: Stylus / GrooveOutput connection: Cartridge PinsTarget icon: deviceOutput: MM Phono InputNote: Install and align the cartridge on a compatible 1/2-inch mount, then verify overhang, tracking force, and anti-skate.Technical SpecificationsCartridge and Stylus Type: VM dual moving magnet stereo cartridge Frequency Response: 20–23,000 Hz Output Voltage: 5.0 mV at 1 kHz, 5 cm/s Channel Separation: 24 dB at 1 kHz Output Balance: 1.5 dB at 1 kHz Stylus: Bonded elliptical, 0.3 × 0.7 mil Cantilever: Aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Recommended Load: 47 kΩ / 150–250 pF Replacement Stylus: AT-VMN20xEB Weight: 7.2 g Recommended System Setup Setup Connection Integrated Amplifier Turntable → MM Phono Input → Amplifier → Speakers External Phono Stage Turntable → MM Phono Stage → Line Input → Amplifier → Speakers What's in the box AT-VM520xEB cartridge M2.6 installation screws: 10 mm × 2, 8 mm × 2, 5 mm × 2 Washers × 2 Non-magnetic screwdriver Brush Download CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/download
$105.25
-
audio-technica Audio-Technica-AT-VM95E/H
Audio-Technica AT-VM95E/H is an AT-VM95E dual moving magnet cartridge with a bonded elliptical stylus, pre-mounted on an AT-HS6 headshell.It provides an accessible, ready-assembled upgrade for compatible detachable-headshell turntables.Why it stands outBonded ellipticalAccessible everyday vinyl playback through a profile selected for accurate groove contact.VM95 Interchangeable Stylus PlatformSupports all six VM95-series replacement stylus assemblies for maintenance or future upgrades.Pre-Mounted AT-HS6 HeadshellReduces initial assembly work on compatible detachable-headshell tonearms.Dual Moving Magnet DesignMirrors the cutter-head geometry for stable stereo separation and dependable playback.Best for Accessible everyday vinyl playback Compatible 1/2-inch-mount turntables Detachable-headshell tonearms MM phono systems Not ideal for P-mount turntables Fixed-headshell or incompatible tonearms Systems without an MM phono input or external MM phono stage EMiUZEK Buying Notes AT-VM95E/H is a pre-mounted cartridge-and-headshell assembly. Verify detachable-headshell connector compatibility and tonearm counterweight range before purchase. Use an MM phono input and set tracking force to 1.8–2.2 g, with 2.0 g standard. FAQDoes it include a headshell?Yes. The cartridge is pre-mounted on an AT-HS6 headshell.Will it fit every turntable?No. Verify 1/2-inch mounting and tonearm compatibility; it is not a P-mount product.What phono stage does it require?Use an MM-compatible phono input with 47 kΩ load impedance and 100–200 pF load capacitance.What is the tracking force?1.8–2.2 g, with 2.0 g standard.Can the stylus be replaced?Yes. The VM95 body accepts all six VM95-series replacement stylus assemblies.Is final setup still required?Yes. Check overhang, alignment, tracking force, and anti-skate after installation.HOW TO CONNECTDetachable-Headshell SetupSource icon: deviceSource: Vinyl RecordConnection: Stylus / GrooveOutput connection: Universal Headshell ConnectorTarget icon: deviceOutput: MM Phono InputNote: Install the headshell on a compatible tonearm, then verify overhang, tracking force, and anti-skate.Technical SpecificationsCartridge and Stylus Type: VM dual moving magnet stereo cartridge Frequency Response: 20–22,000 Hz Output Voltage: 4.0 mV at 1 kHz, 5 cm/s Channel Separation: 20 dB at 1 kHz Output Balance: 2.0 dB at 1 kHz Stylus: Bonded elliptical Cantilever: Aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Electrical and Physical Recommended Load: 47 kΩ / 100–200 pF Cartridge Weight: 6.1 g Cartridge Dimensions: 17.2 × 18.9 × 28.3 mm Mounting: 1/2-inch compatible Recommended System Setup Setup Connection Integrated Amplifier Turntable → MM Phono Input → Amplifier → Speakers External Phono Stage Turntable → MM Phono Stage → Line Input → Amplifier → Speakers What's in the boxAT-VM95E cartridge pre-mounted on AT-HS6 headshellDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/downloadAdditional Product ContentAudio-Technica VM95 Series Comparison Feature AT-VM95E AT-VM95EN AT-VM95ML AT-VM95SH Stylus Bonded elliptical Nude elliptical Nude MicroLinear Nude Shibata Frequency Response 20–22,000 Hz 20–23,000 Hz 20–25,000 Hz 20–25,000 Hz Best Use Accessible everyday playback Balanced detail upgrade Precise tracking and low inner-groove distortion Rich detail and extended groove contact
$141.55
You have seen 96 out of 164 products
Featured products
Share information and details about these products
-
audio-technica Audio-Technica-AT-VM95ML
$182.19
-
audio-technica Audio-Technica-AT-VM520XEB/H
$168.74
-
audio-technica Audio-Technica AT6006R
$146.18
-
Fiio FiiO RR13
$64.99
-
$179.00 - $265.05
-
sonos Sonos Ray
$198.00 - $208.05
-
Fiio FiiO FT1
$155.99
-
Fiio FiiO BR15 R2R
$163.53 - $199.00
-
audio-technica Audio-Technica-AT-VM95EN
$122.76
-
$199.00 - $1,999.00
-
$229.00 $199.00
-
Questyle Questyle NHB12
$399.00 $199.00
-
Fiio FiiO K11 R2R
$139.49 - $175.99
-
Fiio FiiO BTR17
$199.00
-
IEAST iEAST AMP80
$181.05 - $199.00
-
Fosi Audio Fosi Audio MC351
$169.90
-
Fosi Audio Fosi Audio ZD3
$179.90
-
Fosi Audio Fosi Audio K7
$111.48 - $199.90
-
Questyle Questyle M15i
$249.00 $198.55
-
Arylic Arylic A50+
$176.00 - $209.00
-
$99.00
-
$66.99 - $79.00
-
audio-technica Audio-Technica AT-VM520xEB
$105.25
-
audio-technica Audio-Technica-AT-VM95E/H
$141.55