Create a cleaner home-theatre installation by mounting Sonos Arc or Arc Ultra directly beneath the TV. Select the correct soundbar option and follow Sonos clearance guidance so the upward- and side-firing drivers remain unobstructed.

Why it stands out

Two model selections

Choose the dedicated Arc or Arc Ultra option shown in the variants.

Acoustic clearance

Purpose-built placement helps preserve space around the soundbar’s directional drivers.

Low-profile look

Positions the soundbar close to the wall without using a media console.

Cable access

Power, HDMI and network connections remain reachable.

Best for

• Sonos Arc or Arc Ultra
• Wall-mounted televisions
• Dolby Atmos rooms
• Minimal media-console setups
• Permanent home-theatre installations

Not ideal for

• Sonos Beam or Ray
• TV mounts that need the soundbar to move with the screen
• Installations with obstructed soundbar ends
• Walls unsuitable for the required load

EMiUZEK Buying Notes

• Select Arc Wall Mount or Arc Ultra Wall Mount; verify the exact product before ordering.
• Soundbar is not included.
• For Arc Ultra, Sonos recommends at least 4 in / 10 cm between the soundbar and TV and 1 ft / 30 cm from each end to an obstruction.

FAQ

Does the Arc mount fit Arc Ultra?

Sonos states Arc Ultra is compatible with the Sonos Arc Wall Mount, but choose the listed model option that best matches your installation.

Is the soundbar included?

No. This listing is for the selected wall mount.

How much clearance does Arc Ultra need?

Sonos recommends at least 4 in / 10 cm from the TV and 1 ft / 30 cm from each end to walls or obstructions.

Can it be installed above a TV?

Sonos permits above-TV installation, though below-TV placement is recommended.

Does it attach to a moving TV mount?

No. A direct wall bracket remains fixed; choose a TV-mount soundbar bracket if synchronized movement is required.

Can I hide the cables?

Plan an approved in-wall or surface cable route before installation; do not place the power cord inside a wall unless locally permitted.

Will wall mounting change the sound?

Correct clearance is essential; run Trueplay after changing placement.

What wall hardware should I use?

Use fixings appropriate to wood stud, drywall, plaster, concrete or brick as applicable.

HOW TO CONNECT

1. Plan clearance — Centre the soundbar and mark the bracket while maintaining the required TV and side clearances.
2. Secure bracket — Drill and install wall-specific anchors or stud fixings, then level the bracket.
3. Attach and connect — Mount Arc or Arc Ultra, connect power and HDMI eARC/ARC, then run Sonos setup and Trueplay.

Technical Specifications

Additional Product Content