-
WiiM Vibelink Amp
Unleash the power of pure sound
Why Choose WiiM Vibelink Amp?
-
100W per channel (8Ω)
Stronger motivation, better control
-
One-piece aluminum alloy high-end design
Slim and durable, optimized for heat dissipation
-
Post-Filter Feedback Technology (PFFB)
Overcome the impact of speaker load dependency
-
Auto standby & 12V trigger input
Intelligent energy saving, more worry-free
-
High-fidelity sound quality with a selection of high-end components
High-spec DACs, amplifiers, and op amps
-
Advanced thermal management
Run calmly and listen longer
-
Seamless integration with WiiM streamers
No need to worry about compatibility, just plug it up and use it right away.
-
Pure analog input
No ADC conversion, zero compromise
-
Adaptive sampling rate and bit depth
Optimize settings for each song
-
Bit-level lossless playback (192kHz/24-bit)
Pure high-resolution sound
-
Power, precise control, pure performance.
Built for music lovers and home theater, the WiiM Vibelink Amp delivers powerful and high-fidelity amplification capabilities at 100W per channel at 8Ω and 200W per channel at 4Ω. Every note, beat, and dialogue is clear, deep, and precise for an immersive listening experience.
High-end workmanship, modern aesthetics
With a one-piece aluminum body, the Vibelink Amp combines durability with peak performance. Its minimalist appearance seamlessly blends into any audio system, whether it's a media cabinet or a high-end cabinet. The interior is engineered based on advanced cooling solutions (including copper heat pipes and large-area aluminum heat sinks), which can efficiently dissipate heat even under high loads and operate stably for a long time
-
High-fidelity sound with high-end components
Equipped with ESS 9039Q2M high-end DAC, TI TPA3255 amplifier chip, and 6 TI OPA1612 op amps, it delivers extremely low noise and distortion to deliver details that are difficult to capture with common amplifiers. It supports up to 192kHz/24-bit high-resolution audio, which increases dynamic range while maintaining the authenticity of recordings, resulting in a richer, more immersive sound experience.
-
Post-Filtered Feedback (PFFB) technology
At the heart of the Vibelink Amp's exceptional sound is advanced PFFB technology, a cutting-edge optimization system that minimizes distortion, enhances clarity, and maintains consistent sound quality across different speaker loads. Unlike traditional amplifiers that are susceptible to loads, PFFB dynamically compensates for these differences, resulting in a more accurate, balanced, and natural sound. Wider soundstage, richer detail and a more immersive listening experience give every note precision and depth.
.
Advanced thermal management
High power amplification brings heat, but the Vibelink Amp remains calm under pressure with advanced thermal management:
Copper heat pipes – quickly export heat from the core device for consistent performance at any volume.
Large area aluminum heat sink – excellent thermal conductivity for fast and efficient heat dissipation without frequency reduction.
Precision PID Control – Real-time temperature control for optimal cooling and long-term reliability.
-
Smart and efficient energy saving performance
Vibelink Amp combines modern convenience with energy efficiency: Auto Standby mode automatically sleeps after 30 or 60 minutes of inactivity. The 12V trigger input can be linked to compatible devices for instant wake-up, making it a smart and efficient part of your home audio system.
-
Pure analog inputs – no ADC conversion with zero compromise
Unlike many amplifiers that digitize analog signals, introduce additional processing, and degrade, Vibelink Amp provides a completely pure analog input that bypasses all ADC conversions and brings:
A more direct, unrewritten signal path for the purest analog experience
Authentic and warm sound presentation, no artificial coloring
A true audiophile-grade listening experience that preserves the authenticity of vinyl, CD, and high-end analog sources
Bit-level lossless playback – pure high resolution
Bit-level lossless playback at 192kHz/24-bit via optical and coaxial inputs ensures zero signal loss and faithful reproduction of the original sound. Unlike conventional amplifiers that modify or resample, it restores every detail with extreme clarity, depth, and dynamics, making it the perfect choice for audiophiles.
Technical Specifications
| Category | Details |
|---|---|
| Dimensions | 7.9 x 8.4 x 2.6 inches (200 x 212.5 x 66 mm) |
| Weight | 2.05 kg (4.5 lbs) |
| Power input | 100-240V, 50/60Hz AC, 3A Max |
| Output Power | 100W per channel at 8Ω (stereo) |
| Amplifier Technology | Class-D with PFFB (Post-Filter Feedback) technology |
| Total Harmonic Distortion (THD+N) | ≤0.0005% |
| Signal-to-Noise Ratio (SNR) | ≥120dB |
| Frequency Response | 20Hz – 20kHz ± 0.5dB |
| Impedence Range | 3~8 ohms |
| Premium DAC | ESS 9039Q2M high-performance DAC |
| Bit-Perfect Playback | Supports up to 192kHz/24-bit audio |
| Dynamic Range | ≥120dB for high-resolution sound |
| Pure Analog Input | No ADC conversion, maintaining signal integrity |
| Input & Output Options | - |
| Analog Inputs: | • 1x RCA Stereo (Line-In, pure analog signal path) |
| ✅ Digital Inputs: | • 1x Optical (TOSLINK) – Up to 192kHz/24-bit• 1x Coaxial (S/PDIF) – Up to 192kHz/24-bit |
| ✅ Speaker Outputs: | • Gold-plated binding posts (supports banana plugs or bare wire connections) |
| ✅ Trigger & Power Management: | • 12V Trigger In: Auto power-on with compatible devices• Auto Standby Mode: Powers down after 30 or 60 minutes of inactivity |
| Supported Audio Formats | PCM up to 192kHz/24-bit (through digital sources) |
| Control Interfaces | - |
| Volume Knob: | Adjusts volume |
| LED Indicator: | Three 4-color RGBW LED indicates source input and device status |
| • Chassis: | Premium unibody aluminum for durability & heat dissipation |
| • Thermal Management: | Copper heat pipe, large aluminum heatsink, unibody aluminum case, and precision PIDthermal control |
| • Cooling System: | Passive, silent operation |
| Package Contents | Use Guide *1Power Cable *1RCA Cable *1Optical Cable *1Banana Plugs *4 |
FAQ
Is it better than the WiiM Amp Pro?
It is different. The WiiM Amp Pro is an "All-in-One" (Streamer + Amp). The Vibelink Amp is just an Amp, but it has more power (100W vs 60W) and a pure analog path. Choose Vibelink if you already have a streamer or need more power.
Can I connect a subwoofer?
The Vibelink Amp itself does not have a subwoofer output. However, if you use it with a WiiM Ultra or WiiM Pro Plus, you can connect your subwoofer to the streamer's sub-out, and the Vibelink Amp will handle the main speakers.
Does it have Wi-Fi or Bluetooth?
No. The Vibelink Amp is a pure integrated amplifier. It does not stream music on its own. It is designed to be connected to a streamer (like WiiM Ultra, Mini, or Pro Plus) or other audio sources.
Can the WiiM Vibelink Amp power high-end passive speakers?
Yes, the WiiM Vibelink Amp is a powerful integrated streaming amplifier designed to drive a wide range of passive speakers. With its high-efficiency Class-D amplification, it provides ample clean power to deliver dynamic, room-filling sound. Whether you are using bookshelf speakers or demanding floor-standing towers, the Vibelink Amp ensures high-fidelity performance with minimal distortion.
Does the WiiM Vibelink Amp support multi-room audio synchronization?
Absolutely. One of the core strengths of the WiiM ecosystem is its seamless multi-room integration. You can group the Vibelink Amp with other WiiM devices or AirPlay 2-enabled speakers via the WiiM Home app. This allows you to stream perfectly synchronized music throughout your entire home, manageable from a single interface.
What streaming services and protocols are compatible with the Vibelink Amp?
The WiiM Vibelink Amp is designed for maximum connectivity. It natively supports major streaming platforms including Spotify Connect, TIDAL Connect, Amazon Music, and Qobuz. Additionally, it features built-in support for Apple AirPlay 2, Google Chromecast, and DLNA, giving you the flexibility to cast audio from any mobile device, tablet, or PC.
How does the WiiM Vibelink Amp improve TV audio performance?
The Vibelink Amp features an HDMI ARC (Audio Return Channel) input, allowing you to connect it directly to your television. This setup enables you to bypass weak built-in TV speakers in favor of your high-quality passive speakers. Plus, with HDMI CEC support, you can conveniently control the amplifier’s volume using your existing TV remote.
Can I use the WiiM Vibelink Amp with my existing turntable or analog sources?
Yes, the Vibelink Amp includes analog RCA inputs, making it easy to connect traditional sources like turntables (with a built-in or external phono preamp) or CD players. The device uses high-quality Analog-to-Digital conversion to ensure that your vinyl or analog collection can be enjoyed through your speakers or even streamed to other WiiM devices in your network.