27 products

  • Dual CS 529 Dual CS 529 – cs529

    View options

    Dual Dual CS 529

    Dual CS 529 is a fully automatic Hi-Fi belt-drive turntable that adds Bluetooth 5.2 aptX HD audio transmission and app remote control. Its twin-gimbal arm, Ortofon 2M Red and switchable phono stage combine convenience with flexible system integration.Why it stands outBluetooth audio and remote controlTransmit record audio via aptX HD to compatible receivers and control key turntable functions from a supported mobile device.Fully automatic twin-gimbal armAutomatic operation is paired with a four-bearing tonearm rather than a fixed entry-level mechanism.Three analog connection pathsUse line output, bypass to an MM phono input, or transmit wirelessly to a compatible Bluetooth receiver.Ortofon 2M Red platformThe fitted cartridge, adjustable tracking force and removable headshell preserve a practical upgrade path.Best for Listeners wanting automatic playback and wireless output Bluetooth headphone or speaker systems with compatible receivers App-controlled turntable placement Hi-Fi systems with line or MM phono inputs Not ideal for Buyers who need Bluetooth audio input Users expecting Wi-Fi streaming Manual-only purists Product Details and Setup ViewsEMiUZEK Buying Notes Bluetooth is an audio output and control link; it does not turn the CS 529 into a Bluetooth speaker or accept phone audio. aptX HD quality requires a compatible receiving device; otherwise the negotiated Bluetooth codec may differ. For wired use, match the phono/line setting to the amplifier input. Frequently asked questionsCan it send vinyl audio over Bluetooth?Yes. It provides Bluetooth 5.2 audio output with aptX HD support for compatible receivers.Can a phone stream music into it?No. Bluetooth is for turntable audio output and supported remote control, not audio input.Is it fully automatic?Yes. It supports automatic start, cueing, stop and return.Which cartridge is installed?An Ortofon 2M Red.Does it have a phono preamp?Yes. The built-in MM stage is switchable.Can it play 78 RPM?Yes, with a suitable 78 RPM stylus or cartridge.Will any Bluetooth headphones work?Many receivers can pair, but codec support and volume control depend on the receiving device.HOW TO CONNECTBluetooth listeningSource: RecordConnection: Bluetooth 5.2 audio transmitterOutput connection: Compatible Bluetooth speaker or headphonesPowered speakers or AUXSource: RecordConnection: Internal phono stage set to LINEOutput connection: RCA cable to analog line inputDedicated phono systemSource: RecordConnection: Internal phono stage bypassedOutput connection: RCA cable to MM PHONO inputTechnical Specifications Feature Specification Operation Fully automatic or manual; Bluetooth remote control Drive Regulated DC motor, belt drive Speeds 33 / 45 / 78 RPM Wow and flutter < ±0.08% (DIN weighted) Cartridge Ortofon 2M Red Tonearm Twin-gimbal; four pivot ball bearings; removable headshell Bluetooth 5.2 audio output; aptX HD; remote-control link Platter 305 mm die-cast aluminium; 850 g including mat Analog output RCA sockets; switchable phono/line Dimensions / weight 435 × 367 × 148.5 mm; 6.7 kg Additional Product ContentComparison: Dual CS 529 vs Dual CS 429 vs Dual CS 618QUse the differences below to choose by operation style, drive system and upgrade priorities. Feature Dual CS 529 Dual CS 429 Dual CS 618Q Operation Fully automatic + app control Fully automatic Manual with auto lift/stop Drive Belt Belt Quartz direct drive Wireless audio Bluetooth 5.2 aptX HD output None None Cartridge Ortofon 2M Red Ortofon 2M Red Ortofon 2M Blue Best reason to choose Wireless output and remote operation Lower-cost automatic Hi-Fi Direct-drive precision

    Read more

    $988.00 - $999.00

    View options

  • Audio-Technica-AT-VM750XSH – image 1 Audio-Technica-AT-VM750XSH – image 2

    View options

    audio-technica Audio-Technica-AT-VM750XSH

    Audio-Technica AT-VM750xSH is a premium dual moving magnet stereo cartridge with a nude Shibata stylus and solid boron cantilever.Its refined groove contact, rigid aluminum body, and high channel separation deliver detailed, dimensional vinyl playback with strong high-frequency retrieval. Why it stands outNude Shibata StylusProvides a broad groove contact area for rich detail, extended high-frequency response, and reduced distortion.Solid Boron CantileverCombines low moving mass with high rigidity for responsive transient reproduction and precise signal transfer.Rigid Aluminum Cartridge BodyReduces unwanted vibration and resonance while providing effective shielding between channels.Interchangeable AT-VMx Stylus SystemAllows future replacement or sound-character upgrades using compatible stereo AT-VMx replacement styli. Best for Premium stereo vinyl systems Listeners seeking rich detail and extended high-frequency response Upgrading a compatible 1/2-inch-mount turntable Carefully aligned tonearms with adjustable tracking force Not ideal for P-mount turntables Turntables without an MM-compatible phono input or external MM phono stage Users wanting a cartridge pre-mounted on a headshell Systems that cannot be accurately aligned or set to the specified tracking force EMiUZEK Buying Notes AT-VM750xSH is a phono cartridge, not a complete headshell assembly. It requires a compatible 1/2-inch mounting system and an MM phono input or external MM phono preamplifier. Set tracking force to 1.8–2.2 g, with 2.0 g as the standard setting, and complete cartridge alignment before playback. FAQDoes the AT-VM750xSH include a headshell?No. It is supplied as a cartridge for installation on a compatible headshell or headshell-integrated tonearm.What phono stage does it require?Use an MM-compatible phono input with a recommended load of 47 kΩ and 150–250 pF capacitance.Can it be used on a P-mount turntable?No. It is designed for compatible 1/2-inch mounting systems.What is the recommended tracking force?The specified range is 1.8–2.2 g, with 2.0 g as the standard setting.Which replacement stylus is the direct match?The direct replacement is the Audio-Technica AT-VMN50xSH, sold separately.Can other AT-VMx styli be installed?Compatible stereo AT-VMx replacement styli can be used for different stylus profiles and listening priorities; mono models are excluded. HOW TO CONNECTStandard Turntable SetupSource icon: deviceSource: Vinyl RecordConnection: Stylus / GrooveOutput connection: Cartridge PinsTarget icon: deviceOutput: MM Phono InputNote: Install and align the cartridge on a compatible 1/2-inch headshell or tonearm, then set the specified tracking force.External Phono Stage SetupSource icon: deviceSource: TurntableConnection: Tonearm WiringOutput connection: RCA Phono CableTarget icon: deviceOutput: External MM Phono StageNote: Connect the phono stage to an amplifier line input; do not connect the cartridge-level signal directly to a standard line input. Technical SpecificationsCartridge Type: VM dual moving magnet stereo cartridge Frequency Response: 20–27,000 Hz Output Voltage: 3.7 mV at 1 kHz, 5 cm/s Channel Separation: 26 dB at 1 kHz Output Balance: 1.0 dB at 1 kHz Vertical Tracking Angle: 20° Stylus and Tracking Stylus: Nude Shibata Stylus Curvature Radius: 2.7 × 0.26 mil Cantilever: 0.28 mm solid boron Tracking Force: 1.8–2.2 g; 2.0 g standard Static Compliance: 20 × 10⁻⁶ cm/dyne Dynamic Compliance: 7 × 10⁻⁶ cm/dyne at 100 Hz Replacement Stylus: AT-VMN50xSH, sold separately Electrical Recommended Load Impedance: 47 kΩ Recommended Load Capacitance: 150–250 pF Coil Impedance: 3.2 kΩ at 1 kHz DC Resistance: 750 Ω Coil Inductance: 480 mH at 1 kHz Physical Mounting: 1/2-inch compatible Threaded Holes: M2.6 × 2 Dimensions: 29.0 × 18.3 × 17.5 mm Weight: 8.8 g Recommended System Setup Setup Connection Integrated Amplifier Turntable → MM Phono Input → Amplifier → Speakers External Phono Stage Turntable → MM Phono Stage → Line Input → Amplifier → Speakers What's in the box AT-VM750xSH cartridge M2.6 cartridge installation screws: 10 mm × 2, 8 mm × 2, 5 mm × 2 Washers × 2 Non-magnetic screwdriver Brush Download CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/downloadAdditional Product ContentAudio-Technica AT-VMx Cartridge Comparison Feature AT-VM750xSH AT-VM740xML AT-VM520xEB/H Product Position Premium Shibata cartridge Premium MicroLinear cartridge Pre-mounted elliptical cartridge and headshell Stylus Nude Shibata Nude MicroLinear Bonded elliptical Cantilever Solid boron Tapered aluminum pipe Aluminum pipe Output Voltage 3.7 mV 3.2 mV 5.0 mV Headshell Included No No AT-LT10, pre-mounted Best Use Rich, detailed premium vinyl playback Precise tracking and low inner-groove distortion Convenient upgrade for compatible detachable-headshell tonearms

    Read more

    $350.55

    View options

  • Audio-Technica AT-VM740xML – image 1 Audio-Technica AT-VM740xML – image 2

    View options

    audio-technica Audio-Technica AT-VM740xML

    Audio-Technica AT-VM740xML is a premium dual moving magnet stereo cartridge with a nude MicroLinear stylus and tapered aluminum-pipe cantilever.Its precise groove tracing, rigid aluminum body, and refined AT-VMx generator deliver detailed playback with excellent tracking and reduced inner-groove distortion. Why it stands outNude MicroLinear StylusClosely follows complex groove modulations to retrieve fine detail and maintain clarity toward the inner grooves.Responsive AT-VMx GeneratorPCUHD coils and paratoroidal construction improve transient response, channel separation, and stereo definition.Rigid Aluminum Cartridge BodySuppresses unwanted resonance and vibration while providing effective electromagnetic shielding.Interchangeable AT-VMx Stylus SystemSupports compatible stereo AT-VMx replacement styli for future maintenance or a different stylus profile. Best for Detailed stereo vinyl playback Reducing inner-groove distortion through precise setup Upgrading a compatible 1/2-inch-mount turntable Listeners who value tracking accuracy and clean high-frequency detail Not ideal for P-mount turntables Turntables without an MM-compatible phono input or external MM phono stage Users wanting a pre-mounted headshell assembly Systems that cannot be accurately aligned or set to the specified tracking force EMiUZEK Buying Notes AT-VM740xML is a cartridge only; a headshell is not included. It requires a compatible 1/2-inch mounting system and an MM phono input or external MM phono preamplifier. Set tracking force to 1.8–2.2 g, with 2.0 g as the standard setting, and align overhang and cartridge geometry before use. FAQDoes the AT-VM740xML include a headshell?No. It is supplied as a cartridge for installation on a compatible headshell or integrated tonearm.What phono stage does it require?Use an MM-compatible phono input with a recommended load of 47 kΩ and 150–250 pF capacitance.Can it be used on a P-mount turntable?No. It is designed for compatible 1/2-inch mounting systems.What is the recommended tracking force?The specified range is 1.8–2.2 g, with 2.0 g as the standard setting.Which replacement stylus is the direct match?The direct replacement is the Audio-Technica AT-VMN40xML, sold separately.Can other AT-VMx styli be installed?Compatible stereo AT-VMx replacement styli can be used for different stylus profiles and budgets; mono models are excluded. HOW TO CONNECTStandard Turntable SetupSource icon: deviceSource: Vinyl RecordConnection: Stylus / GrooveOutput connection: Cartridge PinsTarget icon: deviceOutput: MM Phono InputNote: Install and align the cartridge on a compatible 1/2-inch headshell or tonearm, then set the specified tracking force.External Phono Stage SetupSource icon: deviceSource: TurntableConnection: Tonearm WiringOutput connection: RCA Phono CableTarget icon: deviceOutput: External MM Phono StageNote: Connect the phono stage to an amplifier line input; do not connect the cartridge-level signal directly to a standard line input. Technical SpecificationsCartridge Type: VM dual moving magnet stereo cartridge Frequency Response: 20–25,000 Hz Output Voltage: 3.2 mV at 1 kHz, 5 cm/s Channel Separation: 25 dB at 1 kHz Output Balance: 1.0 dB at 1 kHz Vertical Tracking Angle: 20° Stylus and Tracking Stylus: Nude MicroLinear Stylus Curvature Radius: 2.2 × 0.12 mil Cantilever: Tapered aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Static Compliance: 20 × 10⁻⁶ cm/dyne Dynamic Compliance: 7 × 10⁻⁶ cm/dyne at 100 Hz Replacement Stylus: AT-VMN40xML, sold separately Electrical Recommended Load Impedance: 47 kΩ Recommended Load Capacitance: 150–250 pF Coil Impedance: 3.2 kΩ at 1 kHz DC Resistance: 750 Ω Coil Inductance: 480 mH at 1 kHz Physical Mounting: 1/2-inch compatible Threaded Holes: M2.6 × 2 Dimensions: 29.0 × 18.3 × 17.5 mm Weight: 8.8 g Recommended System Setup Setup Connection Integrated Amplifier Turntable → MM Phono Input → Amplifier → Speakers External Phono Stage Turntable → MM Phono Stage → Line Input → Amplifier → Speakers What's in the box AT-VM740xML cartridge M2.6 cartridge installation screws: 10 mm × 2, 8 mm × 2, 5 mm × 2 Washers × 2 Non-magnetic screwdriver Brush Download CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/downloadAdditional Product ContentAudio-Technica AT-VMx Cartridge Comparison Feature AT-VM750xSH AT-VM740xML AT-VM520xEB/H Product Position Premium Shibata cartridge Premium MicroLinear cartridge Pre-mounted elliptical cartridge and headshell Stylus Nude Shibata Nude MicroLinear Bonded elliptical Cantilever Solid boron Tapered aluminum pipe Aluminum pipe Output Voltage 3.7 mV 3.2 mV 5.0 mV Headshell Included No No AT-LT10, pre-mounted Best Use Rich, detailed premium vinyl playback Precise tracking and low inner-groove distortion Convenient upgrade for compatible detachable-headshell tonearms

    Read more

    $289.24

    View options

  • Audio-Technica-AT-VM520XEB/H – image 1 Audio-Technica-AT-VM520XEB/H – image 2

    View options

    audio-technica Audio-Technica-AT-VM520XEB/H

    Audio-Technica AT-VM520xEB/H combines an AT-VM520xEB dual moving magnet cartridge with a bonded elliptical stylus, pre-mounted on an AT-LT10 universal headshell.It offers a convenient upgrade for compatible detachable-headshell tonearms, with factory assembly reducing installation work while retaining adjustable cartridge positioning. Why it stands outPre-Mounted Cartridge and HeadshellCombines the cartridge and AT-LT10 headshell in one assembled package for faster installation on compatible tonearms.Bonded Elliptical StylusProvides more precise groove contact than a conical stylus for balanced detail and dependable everyday vinyl playback.Adjustable AT-LT10 HeadshellElongated through-holes allow cartridge positioning and overhang adjustment for correct turntable setup.Interchangeable AT-VMx Stylus SystemSupports compatible stereo AT-VMx replacement styli for maintenance or a future stylus-profile upgrade. Best for Compatible turntables with a detachable universal headshell Users wanting a pre-mounted cartridge upgrade Everyday stereo vinyl listening Systems using an MM phono input Not ideal for Turntables with a fixed headshell or incompatible tonearm connector P-mount turntables Systems without an MM-compatible phono input or external MM phono stage Users whose tonearm cannot accommodate the 18.3 g cartridge-and-headshell assembly EMiUZEK Buying Notes AT-VM520xEB/H includes the AT-VM520xEB cartridge pre-mounted on an AT-LT10 universal headshell; it is not the cartridge-only AT-VM520xEB package. Verify tonearm connector compatibility, assembly weight, overhang, alignment, and tracking-force adjustment before purchase. It requires an MM phono input or external MM phono preamplifier and cannot be connected directly to a standard amplifier line input. FAQIs the cartridge already mounted on the headshell?Yes. The AT-VM520xEB cartridge is supplied pre-mounted on the AT-LT10 headshell, but final overhang, alignment, tracking force, and anti-skate checks are still required.Will it fit every turntable?No. It is intended for compatible tonearms that accept a detachable universal headshell. Check the tonearm connector and supported assembly weight.Can it be used on a P-mount turntable?No. It is not a P-mount cartridge assembly.What phono stage does it require?Use an MM-compatible phono input with a recommended load of 47 kΩ and 150–250 pF capacitance.What is the recommended tracking force?The specified range is 1.8–2.2 g, with 2.0 g as the standard setting.Which replacement stylus is the direct match?The direct replacement is the Audio-Technica AT-VMN20xEB, sold separately. HOW TO CONNECTDetachable-Headshell Turntable SetupSource icon: deviceSource: Vinyl RecordConnection: Stylus / GrooveOutput connection: Universal Headshell ConnectorTarget icon: deviceOutput: MM Phono InputNote: Install the headshell assembly on a compatible tonearm and verify overhang, alignment, tracking force, and anti-skate before playback.External Phono Stage SetupSource icon: deviceSource: TurntableConnection: Tonearm WiringOutput connection: RCA Phono CableTarget icon: deviceOutput: External MM Phono StageNote: Connect the phono stage to an amplifier line input; the cartridge-level signal is not intended for a standard line input. Technical SpecificationsCartridge Type: VM dual moving magnet stereo cartridge with headshell Frequency Response: 20–23,000 Hz Output Voltage: 5.0 mV at 1 kHz, 5 cm/s Channel Separation: 24 dB at 1 kHz Output Balance: 1.5 dB at 1 kHz Vertical Tracking Angle: 20° Stylus and Tracking Stylus: Bonded elliptical Stylus Size: 0.3 × 0.7 mil Cantilever: Aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Static Compliance: 20 × 10⁻⁶ cm/dyne Dynamic Compliance: 7 × 10⁻⁶ cm/dyne at 100 Hz Replacement Stylus: AT-VMN20xEB, sold separately Electrical Recommended Load Impedance: 47 kΩ Recommended Load Capacitance: 150–250 pF Coil Impedance: 3.2 kΩ at 1 kHz DC Resistance: 750 Ω Coil Inductance: 480 mH at 1 kHz Headshell Assembly Headshell: AT-LT10 Compatible Cartridge Mount: Universal 1/2-inch, 4-pin cartridge mounting Assembly Dimensions: 21.5 × 18.5 × 68.4 mm Assembly Weight: 18.3 g Recommended System Setup Setup Connection Integrated Amplifier Turntable → MM Phono Input → Amplifier → Speakers External Phono Stage Turntable → MM Phono Stage → Line Input → Amplifier → Speakers What's in the boxAT-VM520xEB cartridge pre-mounted on AT-LT10 headshellDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/downloadAdditional Product ContentAudio-Technica AT-VMx Cartridge Comparison Feature AT-VM750xSH AT-VM740xML AT-VM520xEB/H Product Position Premium Shibata cartridge Premium MicroLinear cartridge Pre-mounted elliptical cartridge and headshell Stylus Nude Shibata Nude MicroLinear Bonded elliptical Cantilever Solid boron Tapered aluminum pipe Aluminum pipe Output Voltage 3.7 mV 3.2 mV 5.0 mV Headshell Included No No AT-LT10, pre-mounted Best Use Rich, detailed premium vinyl playback Precise tracking and low inner-groove distortion Convenient upgrade for compatible detachable-headshell tonearms

    Read more

    $168.74

    View options

  • Audio-Technica AT-VM520xEB – image 1 Audio-Technica AT-VM520xEB – image 2

    View options

    audio-technica Audio-Technica AT-VM520xEB

    Audio-Technica AT-VM520xEB is a dual moving magnet stereo cartridge with a bonded elliptical stylus.Its updated AT-VMx generator, PCUHD coils, and elliptical profile provide balanced detail and dependable tracking for everyday HiFi vinyl systems.Why it stands outBonded Elliptical StylusProvides more precise groove contact than a conical stylus for balanced detail and reliable record playback.Updated AT-VMx GeneratorPCUHD coils and dual-magnet construction support responsive dynamics and clean stereo reproduction.Threaded Cartridge BodyM2.6 threaded inserts simplify installation on compatible through-hole headshells and tonearms.Interchangeable Stylus SystemAccepts compatible stereo AT-VMx replacement styli for maintenance or future upgrades.Best for Everyday HiFi vinyl listening Upgrading a compatible 1/2-inch-mount turntable Listeners moving beyond a conical stylus MM phono systems Not ideal for P-mount turntables Users wanting a cartridge pre-mounted on a headshell Systems without an MM phono input or external MM phono stage EMiUZEK Buying Notes AT-VM520xEB is a cartridge only; a headshell is not included. It requires a compatible 1/2-inch mount and an MM phono input or external MM phono stage. Set tracking force to 1.8–2.2 g, with 2.0 g standard, and complete cartridge alignment before use. FAQDoes it include a headshell?No. This is the cartridge-only version.What phono stage does it require?Use an MM input with 47 kΩ load impedance and 150–250 pF load capacitance.Can it be used on a P-mount turntable?No. It is designed for compatible 1/2-inch mounting systems.What is the tracking force?1.8–2.2 g, with 2.0 g standard.What is the direct replacement stylus?AT-VMN20xEB, sold separately.Can other AT-VMx styli be used?Compatible stereo AT-VMx replacement styli can be used; mono models are excluded.HOW TO CONNECTStandard Turntable SetupSource icon: deviceSource: Vinyl RecordConnection: Stylus / GrooveOutput connection: Cartridge PinsTarget icon: deviceOutput: MM Phono InputNote: Install and align the cartridge on a compatible 1/2-inch mount, then verify overhang, tracking force, and anti-skate.Technical SpecificationsCartridge and Stylus Type: VM dual moving magnet stereo cartridge Frequency Response: 20–23,000 Hz Output Voltage: 5.0 mV at 1 kHz, 5 cm/s Channel Separation: 24 dB at 1 kHz Output Balance: 1.5 dB at 1 kHz Stylus: Bonded elliptical, 0.3 × 0.7 mil Cantilever: Aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Recommended Load: 47 kΩ / 150–250 pF Replacement Stylus: AT-VMN20xEB Weight: 7.2 g Recommended System Setup Setup Connection Integrated Amplifier Turntable → MM Phono Input → Amplifier → Speakers External Phono Stage Turntable → MM Phono Stage → Line Input → Amplifier → Speakers What's in the box AT-VM520xEB cartridge M2.6 installation screws: 10 mm × 2, 8 mm × 2, 5 mm × 2 Washers × 2 Non-magnetic screwdriver Brush Download CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/download

    Read more

    $105.25

    View options

  • Audio-Technica-AT-VMN95SH – image 1 Audio-Technica-AT-VMN95SH – image 2

    View options

    audio-technica Audio-Technica-AT-VMN95SH

    Audio-Technica AT-VMN95SH is a nude Shibata replacement stylus for compatible Audio-Technica VM95-series cartridge bodies.Rich, detailed vinyl playback, while restoring a worn compatible cartridge without replacing the complete cartridge body.Why it stands outnude Shibata ProfileProvides broad groove contact for rich detail and extended high-frequency retrieval.Direct VM95-Series ReplacementInstalls on compatible VM95 cartridge bodies without replacing the cartridge or rewiring the headshell.Interchangeable VM95 PlatformLets owners change stylus profile within the VM95 family while retaining the same compatible cartridge body.Best for Replacing a worn stylus on a compatible VM95 cartridge Rich, detailed vinyl playback Users retaining an installed and aligned VM95 cartridge body MM vinyl playback systems Not ideal for Non-VM95 cartridge bodies Users needing a complete cartridge Cartridge bodies with damage beyond the stylus assembly EMiUZEK Buying Notes AT-VMN95SH is a replacement stylus only; the cartridge body is sold separately. Confirm the installed cartridge belongs to the Audio-Technica VM95 series before purchase. After installation, use a tracking force of 1.8–2.2 g, with 2.0 g standard, and recheck setup. FAQDoes this include the cartridge body?No. It is a replacement stylus assembly only.Which cartridges are compatible?It is designed for Audio-Technica VM95-series cartridge bodies.Does the cartridge need to be realigned?The cartridge body normally remains in place, but tracking force, anti-skate, and stylus seating should be checked after replacement.What tracking force should be used?1.8–2.2 g, with 2.0 g standard.How should it be installed?Remove the old stylus assembly carefully and seat the new assembly according to the Audio-Technica instructions without touching the cantilever or diamond tip.HOW TO CONNECTVM95 Stylus ReplacementSource icon: deviceSource: Compatible VM95 Cartridge BodyConnection: Replacement Stylus MountOutput connection: Cartridge PinsTarget icon: deviceOutput: MM Phono InputNote: Power off the system, replace the stylus carefully, and confirm tracking force and anti-skate before playback.Technical SpecificationsStylus Product Type: Replacement stylus assembly Stylus: nude Shibata Cantilever: Aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Compatible Cartridge Body: Audio-Technica VM95 series Recommended System Setup Setup Connection VM95 Cartridge AT-VMN95SH → Compatible VM95 Body → MM Phono Input What's in the boxAT-VMN95SH replacement stylusDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/downloadAdditional Product ContentVM95 Replacement Stylus Comparison Feature AT-VMN95ML AT-VMN95SH Stylus Nude MicroLinear Nude Shibata Best Use Precise tracking and low inner-groove distortion Rich detail and extended groove contact Compatible Body VM95 series VM95 series

    Read more

    $198.55

    View options

  • Audio-Technica-AT-VM95SH – image 1 Audio-Technica-AT-VM95SH – image 2

    View options

    audio-technica Audio-Technica-AT-VM95SH

    Audio-Technica AT-VM95SH is a VM95-series dual moving magnet cartridge with a nude Shibata stylus.Its broad groove contact retrieves rich detail and extended high-frequency information for a refined vinyl upgrade.Why it stands outNude ShibataRich, detailed vinyl playback through a profile selected for accurate groove contact.VM95 Interchangeable Stylus PlatformSupports all six VM95-series replacement stylus assemblies for maintenance or future upgrades.Threaded Cartridge BodySimplifies installation on compatible 1/2-inch-mount headshells.Dual Moving Magnet DesignMirrors the cutter-head geometry for stable stereo separation and dependable playback.Best for Rich, detailed vinyl playback Compatible 1/2-inch-mount turntables Users comfortable with cartridge alignment MM phono systems Not ideal for P-mount turntables Users wanting a pre-mounted headshell assembly Systems without an MM phono input or external MM phono stage EMiUZEK Buying Notes AT-VM95SH is a cartridge only; a headshell is not included. It requires installation and alignment on a compatible 1/2-inch mounting system. Use an MM phono input and set tracking force to 1.8–2.2 g, with 2.0 g standard. FAQDoes it include a headshell?No. A compatible headshell or tonearm mount is required.Will it fit every turntable?No. Verify 1/2-inch mounting and tonearm compatibility; it is not a P-mount product.What phono stage does it require?Use an MM-compatible phono input with 47 kΩ load impedance and 100–200 pF load capacitance.What is the tracking force?1.8–2.2 g, with 2.0 g standard.Can the stylus be replaced?Yes. The VM95 body accepts all six VM95-series replacement stylus assemblies.Is final setup still required?Yes. Cartridge alignment, overhang, tracking force, and anti-skate must be set correctly.HOW TO CONNECTStandard Turntable SetupSource icon: deviceSource: Vinyl RecordConnection: Stylus / GrooveOutput connection: Cartridge PinsTarget icon: deviceOutput: MM Phono InputNote: Install and align the cartridge on a compatible 1/2-inch mount, then verify overhang, tracking force, and anti-skate.Technical SpecificationsCartridge and Stylus Type: VM dual moving magnet stereo cartridge Frequency Response: 20–25,000 Hz Output Voltage: 3.5 mV at 1 kHz, 5 cm/s Channel Separation: 23 dB at 1 kHz Output Balance: 1.5 dB at 1 kHz Stylus: Nude Shibata Cantilever: Aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Electrical and Physical Recommended Load: 47 kΩ / 100–200 pF Cartridge Weight: 6.1 g Cartridge Dimensions: 17.2 × 18.9 × 28.3 mm Mounting: 1/2-inch compatible Recommended System Setup Setup Connection Integrated Amplifier Turntable → MM Phono Input → Amplifier → Speakers External Phono Stage Turntable → MM Phono Stage → Line Input → Amplifier → Speakers What's in the boxAT-VM95SH cartridgeDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/downloadAdditional Product ContentAudio-Technica VM95 Series Comparison Feature AT-VM95E AT-VM95EN AT-VM95ML AT-VM95SH Stylus Bonded elliptical Nude elliptical Nude MicroLinear Nude Shibata Frequency Response 20–22,000 Hz 20–23,000 Hz 20–25,000 Hz 20–25,000 Hz Best Use Accessible everyday playback Balanced detail upgrade Precise tracking and low inner-groove distortion Rich detail and extended groove contact

    Read more

    $214.09

    View options

  • Audio-Technica-AT-VM95SH/H – main view 1 Audio-Technica-AT-VM95SH/H – vm95sh h

    View options

    audio-technica Audio-Technica-AT-VM95SH/H

    Audio-Technica AT-VM95SH/H is an AT-VM95SH dual moving magnet cartridge with a nude Shibata stylus, pre-mounted on an AT-HS6 headshell.It combines rich Shibata groove retrieval with a ready-assembled format for compatible detachable-headshell tonearms.Why it stands outNude ShibataConvenient premium Shibata upgrade through a profile selected for accurate groove contact.VM95 Interchangeable Stylus PlatformSupports all six VM95-series replacement stylus assemblies for maintenance or future upgrades.Pre-Mounted AT-HS6 HeadshellReduces initial assembly work on compatible detachable-headshell tonearms.Dual Moving Magnet DesignMirrors the cutter-head geometry for stable stereo separation and dependable playback.Best for Convenient premium Shibata upgrade Compatible 1/2-inch-mount turntables Detachable-headshell tonearms MM phono systems Not ideal for P-mount turntables Fixed-headshell or incompatible tonearms Systems without an MM phono input or external MM phono stage EMiUZEK Buying Notes AT-VM95SH/H is a pre-mounted cartridge-and-headshell assembly. Verify detachable-headshell connector compatibility and tonearm counterweight range before purchase. Use an MM phono input and set tracking force to 1.8–2.2 g, with 2.0 g standard. FAQDoes it include a headshell?Yes. The cartridge is pre-mounted on an AT-HS6 headshell.Will it fit every turntable?No. Verify 1/2-inch mounting and tonearm compatibility; it is not a P-mount product.What phono stage does it require?Use an MM-compatible phono input with 47 kΩ load impedance and 100–200 pF load capacitance.What is the tracking force?1.8–2.2 g, with 2.0 g standard.Can the stylus be replaced?Yes. The VM95 body accepts all six VM95-series replacement stylus assemblies.Is final setup still required?Yes. Check overhang, alignment, tracking force, and anti-skate after installation.HOW TO CONNECTDetachable-Headshell SetupSource icon: deviceSource: Vinyl RecordConnection: Stylus / GrooveOutput connection: Universal Headshell ConnectorTarget icon: deviceOutput: MM Phono InputNote: Install the headshell on a compatible tonearm, then verify overhang, tracking force, and anti-skate.Technical SpecificationsCartridge and Stylus Type: VM dual moving magnet stereo cartridge Frequency Response: 20–25,000 Hz Output Voltage: 3.5 mV at 1 kHz, 5 cm/s Channel Separation: 23 dB at 1 kHz Output Balance: 1.5 dB at 1 kHz Stylus: Nude Shibata Cantilever: Aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Electrical and Physical Recommended Load: 47 kΩ / 100–200 pF Cartridge Weight: 6.1 g Cartridge Dimensions: 17.2 × 18.9 × 28.3 mm Mounting: 1/2-inch compatible Recommended System Setup Setup Connection Integrated Amplifier Turntable → MM Phono Input → Amplifier → Speakers External Phono Stage Turntable → MM Phono Stage → Line Input → Amplifier → Speakers What's in the boxAT-VM95SH cartridge pre-mounted on AT-HS6 headshellDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/downloadAdditional Product ContentAudio-Technica VM95 Series Comparison Feature AT-VM95E AT-VM95EN AT-VM95ML AT-VM95SH Stylus Bonded elliptical Nude elliptical Nude MicroLinear Nude Shibata Frequency Response 20–22,000 Hz 20–23,000 Hz 20–25,000 Hz 20–25,000 Hz Best Use Accessible everyday playback Balanced detail upgrade Precise tracking and low inner-groove distortion Rich detail and extended groove contact

    Read more

    $246.00

    View options

  • Audio-Technica-AT-VMN95ML – image 1 Audio-Technica-AT-VMN95ML – image 2

    View options

    audio-technica Audio-Technica-AT-VMN95ML

    Audio-Technica AT-VMN95ML is a nude MicroLinear replacement stylus for compatible Audio-Technica VM95-series cartridge bodies.Precise tracking and detailed playback, while restoring a worn compatible cartridge without replacing the complete cartridge body.Why it stands outnude MicroLinear ProfilePrecisely traces complex groove modulations for fine detail and reduced inner-groove distortion.Direct VM95-Series ReplacementInstalls on compatible VM95 cartridge bodies without replacing the cartridge or rewiring the headshell.Interchangeable VM95 PlatformLets owners change stylus profile within the VM95 family while retaining the same compatible cartridge body.Best for Replacing a worn stylus on a compatible VM95 cartridge Precise tracking and detailed playback Users retaining an installed and aligned VM95 cartridge body MM vinyl playback systems Not ideal for Non-VM95 cartridge bodies Users needing a complete cartridge Cartridge bodies with damage beyond the stylus assembly EMiUZEK Buying Notes AT-VMN95ML is a replacement stylus only; the cartridge body is sold separately. Confirm the installed cartridge belongs to the Audio-Technica VM95 series before purchase. After installation, use a tracking force of 1.8–2.2 g, with 2.0 g standard, and recheck setup. FAQDoes this include the cartridge body?No. It is a replacement stylus assembly only.Which cartridges are compatible?It is designed for Audio-Technica VM95-series cartridge bodies.Does the cartridge need to be realigned?The cartridge body normally remains in place, but tracking force, anti-skate, and stylus seating should be checked after replacement.What tracking force should be used?1.8–2.2 g, with 2.0 g standard.How should it be installed?Remove the old stylus assembly carefully and seat the new assembly according to the Audio-Technica instructions without touching the cantilever or diamond tip.HOW TO CONNECTVM95 Stylus ReplacementSource icon: deviceSource: Compatible VM95 Cartridge BodyConnection: Replacement Stylus MountOutput connection: Cartridge PinsTarget icon: deviceOutput: MM Phono InputNote: Power off the system, replace the stylus carefully, and confirm tracking force and anti-skate before playback.Technical SpecificationsStylus Product Type: Replacement stylus assembly Stylus: nude MicroLinear Cantilever: Aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Compatible Cartridge Body: Audio-Technica VM95 series Approximate Stylus Life: approximately 1,000 hours Recommended System Setup Setup Connection VM95 Cartridge AT-VMN95ML → Compatible VM95 Body → MM Phono Input What's in the boxAT-VMN95ML replacement stylusDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/downloadAdditional Product ContentVM95 Replacement Stylus Comparison Feature AT-VMN95ML AT-VMN95SH Stylus Nude MicroLinear Nude Shibata Best Use Precise tracking and low inner-groove distortion Rich detail and extended groove contact Compatible Body VM95 series VM95 series

    Read more

    $170.05

    View options

  • Audio-Technica-AT-VM95ML – image 1 Audio-Technica-AT-VM95ML – image 2

    View options

    audio-technica Audio-Technica-AT-VM95ML

    Audio-Technica AT-VM95ML is a VM95-series dual moving magnet cartridge with a nude MicroLinear stylus.Its precise line-contact profile delivers excellent groove tracing, extended detail, and reduced inner-groove distortion.Why it stands outNude MicroLinearPrecise tracking and reduced inner-groove distortion through a profile selected for accurate groove contact.VM95 Interchangeable Stylus PlatformSupports all six VM95-series replacement stylus assemblies for maintenance or future upgrades.Threaded Cartridge BodySimplifies installation on compatible 1/2-inch-mount headshells.Dual Moving Magnet DesignMirrors the cutter-head geometry for stable stereo separation and dependable playback.Best for Precise tracking and reduced inner-groove distortion Compatible 1/2-inch-mount turntables Users comfortable with cartridge alignment MM phono systems Not ideal for P-mount turntables Users wanting a pre-mounted headshell assembly Systems without an MM phono input or external MM phono stage EMiUZEK Buying Notes AT-VM95ML is a cartridge only; a headshell is not included. It requires installation and alignment on a compatible 1/2-inch mounting system. Use an MM phono input and set tracking force to 1.8–2.2 g, with 2.0 g standard. FAQDoes it include a headshell?No. A compatible headshell or tonearm mount is required.Will it fit every turntable?No. Verify 1/2-inch mounting and tonearm compatibility; it is not a P-mount product.What phono stage does it require?Use an MM-compatible phono input with 47 kΩ load impedance and 100–200 pF load capacitance.What is the tracking force?1.8–2.2 g, with 2.0 g standard.Can the stylus be replaced?Yes. The VM95 body accepts all six VM95-series replacement stylus assemblies.Is final setup still required?Yes. Cartridge alignment, overhang, tracking force, and anti-skate must be set correctly.HOW TO CONNECTStandard Turntable SetupSource icon: deviceSource: Vinyl RecordConnection: Stylus / GrooveOutput connection: Cartridge PinsTarget icon: deviceOutput: MM Phono InputNote: Install and align the cartridge on a compatible 1/2-inch mount, then verify overhang, tracking force, and anti-skate.Technical SpecificationsCartridge and Stylus Type: VM dual moving magnet stereo cartridge Frequency Response: 20–25,000 Hz Output Voltage: 3.5 mV at 1 kHz, 5 cm/s Channel Separation: 23 dB at 1 kHz Output Balance: 1.5 dB at 1 kHz Stylus: Nude MicroLinear Cantilever: Aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Electrical and Physical Recommended Load: 47 kΩ / 100–200 pF Cartridge Weight: 6.1 g Cartridge Dimensions: 17.2 × 18.9 × 28.3 mm Mounting: 1/2-inch compatible Recommended System Setup Setup Connection Integrated Amplifier Turntable → MM Phono Input → Amplifier → Speakers External Phono Stage Turntable → MM Phono Stage → Line Input → Amplifier → Speakers What's in the boxAT-VM95ML cartridgeDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/downloadAdditional Product ContentAudio-Technica VM95 Series Comparison Feature AT-VM95E AT-VM95EN AT-VM95ML AT-VM95SH Stylus Bonded elliptical Nude elliptical Nude MicroLinear Nude Shibata Frequency Response 20–22,000 Hz 20–23,000 Hz 20–25,000 Hz 20–25,000 Hz Best Use Accessible everyday playback Balanced detail upgrade Precise tracking and low inner-groove distortion Rich detail and extended groove contact

    Read more

    $182.19

    View options

  • Audio-Technica- AT-VM95ML/H – image 1 Audio-Technica- AT-VM95ML/H – image 2

    View options

    audio-technica Audio-Technica- AT-VM95ML/H

    Audio-Technica AT-VM95ML/H is an AT-VM95ML dual moving magnet cartridge with a nude MicroLinear stylus, pre-mounted on an AT-HS6 headshell.The assembled package combines precise groove tracing with convenient installation on compatible detachable-headshell tonearms.Why it stands outNude MicroLinearPrecise tracking and reduced inner-groove distortion through a profile selected for accurate groove contact.VM95 Interchangeable Stylus PlatformSupports all six VM95-series replacement stylus assemblies for maintenance or future upgrades.Pre-Mounted AT-HS6 HeadshellReduces initial assembly work on compatible detachable-headshell tonearms.Dual Moving Magnet DesignMirrors the cutter-head geometry for stable stereo separation and dependable playback.Best for Precise tracking and reduced inner-groove distortion Compatible 1/2-inch-mount turntables Detachable-headshell tonearms MM phono systems Not ideal for P-mount turntables Fixed-headshell or incompatible tonearms Systems without an MM phono input or external MM phono stage EMiUZEK Buying Notes AT-VM95ML/H is a pre-mounted cartridge-and-headshell assembly. Verify detachable-headshell connector compatibility and tonearm counterweight range before purchase. Use an MM phono input and set tracking force to 1.8–2.2 g, with 2.0 g standard. FAQDoes it include a headshell?Yes. The cartridge is pre-mounted on an AT-HS6 headshell.Will it fit every turntable?No. Verify 1/2-inch mounting and tonearm compatibility; it is not a P-mount product.What phono stage does it require?Use an MM-compatible phono input with 47 kΩ load impedance and 100–200 pF load capacitance.What is the tracking force?1.8–2.2 g, with 2.0 g standard.Can the stylus be replaced?Yes. The VM95 body accepts all six VM95-series replacement stylus assemblies.Is final setup still required?Yes. Check overhang, alignment, tracking force, and anti-skate after installation.HOW TO CONNECTDetachable-Headshell SetupSource icon: deviceSource: Vinyl RecordConnection: Stylus / GrooveOutput connection: Universal Headshell ConnectorTarget icon: deviceOutput: MM Phono InputNote: Install the headshell on a compatible tonearm, then verify overhang, tracking force, and anti-skate.Technical SpecificationsCartridge and Stylus Type: VM dual moving magnet stereo cartridge Frequency Response: 20–25,000 Hz Output Voltage: 3.5 mV at 1 kHz, 5 cm/s Channel Separation: 23 dB at 1 kHz Output Balance: 1.5 dB at 1 kHz Stylus: Nude MicroLinear Cantilever: Aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Electrical and Physical Recommended Load: 47 kΩ / 100–200 pF Cartridge Weight: 6.1 g Cartridge Dimensions: 17.2 × 18.9 × 28.3 mm Mounting: 1/2-inch compatible Recommended System Setup Setup Connection Integrated Amplifier Turntable → MM Phono Input → Amplifier → Speakers External Phono Stage Turntable → MM Phono Stage → Line Input → Amplifier → Speakers What's in the boxAT-VM95ML cartridge pre-mounted on AT-HS6 headshellDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/downloadAdditional Product ContentAudio-Technica VM95 Series Comparison Feature AT-VM95E AT-VM95EN AT-VM95ML AT-VM95SH Stylus Bonded elliptical Nude elliptical Nude MicroLinear Nude Shibata Frequency Response 20–22,000 Hz 20–23,000 Hz 20–25,000 Hz 20–25,000 Hz Best Use Accessible everyday playback Balanced detail upgrade Precise tracking and low inner-groove distortion Rich detail and extended groove contact

    Read more

    $209.40

    View options

  • Audio-Technica-AT-VM95EN – image 1 Audio-Technica-AT-VM95EN – image 2

    View options

    audio-technica Audio-Technica-AT-VM95EN

    Audio-Technica AT-VM95EN is a VM95-series dual moving magnet cartridge with a nude elliptical stylus.Its lower-mass nude diamond improves clarity and transient detail while retaining the series' practical interchangeable-stylus design.Why it stands outNude ellipticalBalanced detail upgrade through a profile selected for accurate groove contact.VM95 Interchangeable Stylus PlatformSupports all six VM95-series replacement stylus assemblies for maintenance or future upgrades.Threaded Cartridge BodySimplifies installation on compatible 1/2-inch-mount headshells.Dual Moving Magnet DesignMirrors the cutter-head geometry for stable stereo separation and dependable playback.Best for Balanced detail upgrade Compatible 1/2-inch-mount turntables Users comfortable with cartridge alignment MM phono systems Not ideal for P-mount turntables Users wanting a pre-mounted headshell assembly Systems without an MM phono input or external MM phono stage EMiUZEK Buying Notes AT-VM95EN is a cartridge only; a headshell is not included. It requires installation and alignment on a compatible 1/2-inch mounting system. Use an MM phono input and set tracking force to 1.8–2.2 g, with 2.0 g standard. FAQDoes it include a headshell?No. A compatible headshell or tonearm mount is required.Will it fit every turntable?No. Verify 1/2-inch mounting and tonearm compatibility; it is not a P-mount product.What phono stage does it require?Use an MM-compatible phono input with 47 kΩ load impedance and 100–200 pF load capacitance.What is the tracking force?1.8–2.2 g, with 2.0 g standard.Can the stylus be replaced?Yes. The VM95 body accepts all six VM95-series replacement stylus assemblies.Is final setup still required?Yes. Cartridge alignment, overhang, tracking force, and anti-skate must be set correctly.HOW TO CONNECTStandard Turntable SetupSource icon: deviceSource: Vinyl RecordConnection: Stylus / GrooveOutput connection: Cartridge PinsTarget icon: deviceOutput: MM Phono InputNote: Install and align the cartridge on a compatible 1/2-inch mount, then verify overhang, tracking force, and anti-skate.Technical SpecificationsCartridge and Stylus Type: VM dual moving magnet stereo cartridge Frequency Response: 20–23,000 Hz Output Voltage: 3.5 mV at 1 kHz, 5 cm/s Channel Separation: 22 dB at 1 kHz Output Balance: 2.0 dB at 1 kHz Stylus: Nude elliptical Cantilever: Aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Electrical and Physical Recommended Load: 47 kΩ / 100–200 pF Cartridge Weight: 6.1 g Cartridge Dimensions: 17.2 × 18.9 × 28.3 mm Mounting: 1/2-inch compatible Recommended System Setup Setup Connection Integrated Amplifier Turntable → MM Phono Input → Amplifier → Speakers External Phono Stage Turntable → MM Phono Stage → Line Input → Amplifier → Speakers What's in the boxAT-VM95EN cartridgeDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/downloadAdditional Product ContentAudio-Technica VM95 Series Comparison Feature AT-VM95E AT-VM95EN AT-VM95ML AT-VM95SH Stylus Bonded elliptical Nude elliptical Nude MicroLinear Nude Shibata Frequency Response 20–22,000 Hz 20–23,000 Hz 20–25,000 Hz 20–25,000 Hz Best Use Accessible everyday playback Balanced detail upgrade Precise tracking and low inner-groove distortion Rich detail and extended groove contact

    Read more

    $122.76

    View options

  • Audio-Technica-AT-VM95E/H – main view 1 Audio-Technica-AT-VM95E/H – detail view 2

    View options

    audio-technica Audio-Technica-AT-VM95E/H

    Audio-Technica AT-VM95E/H is an AT-VM95E dual moving magnet cartridge with a bonded elliptical stylus, pre-mounted on an AT-HS6 headshell.It provides an accessible, ready-assembled upgrade for compatible detachable-headshell turntables.Why it stands outBonded ellipticalAccessible everyday vinyl playback through a profile selected for accurate groove contact.VM95 Interchangeable Stylus PlatformSupports all six VM95-series replacement stylus assemblies for maintenance or future upgrades.Pre-Mounted AT-HS6 HeadshellReduces initial assembly work on compatible detachable-headshell tonearms.Dual Moving Magnet DesignMirrors the cutter-head geometry for stable stereo separation and dependable playback.Best for Accessible everyday vinyl playback Compatible 1/2-inch-mount turntables Detachable-headshell tonearms MM phono systems Not ideal for P-mount turntables Fixed-headshell or incompatible tonearms Systems without an MM phono input or external MM phono stage EMiUZEK Buying Notes AT-VM95E/H is a pre-mounted cartridge-and-headshell assembly. Verify detachable-headshell connector compatibility and tonearm counterweight range before purchase. Use an MM phono input and set tracking force to 1.8–2.2 g, with 2.0 g standard. FAQDoes it include a headshell?Yes. The cartridge is pre-mounted on an AT-HS6 headshell.Will it fit every turntable?No. Verify 1/2-inch mounting and tonearm compatibility; it is not a P-mount product.What phono stage does it require?Use an MM-compatible phono input with 47 kΩ load impedance and 100–200 pF load capacitance.What is the tracking force?1.8–2.2 g, with 2.0 g standard.Can the stylus be replaced?Yes. The VM95 body accepts all six VM95-series replacement stylus assemblies.Is final setup still required?Yes. Check overhang, alignment, tracking force, and anti-skate after installation.HOW TO CONNECTDetachable-Headshell SetupSource icon: deviceSource: Vinyl RecordConnection: Stylus / GrooveOutput connection: Universal Headshell ConnectorTarget icon: deviceOutput: MM Phono InputNote: Install the headshell on a compatible tonearm, then verify overhang, tracking force, and anti-skate.Technical SpecificationsCartridge and Stylus Type: VM dual moving magnet stereo cartridge Frequency Response: 20–22,000 Hz Output Voltage: 4.0 mV at 1 kHz, 5 cm/s Channel Separation: 20 dB at 1 kHz Output Balance: 2.0 dB at 1 kHz Stylus: Bonded elliptical Cantilever: Aluminum pipe Tracking Force: 1.8–2.2 g; 2.0 g standard Electrical and Physical Recommended Load: 47 kΩ / 100–200 pF Cartridge Weight: 6.1 g Cartridge Dimensions: 17.2 × 18.9 × 28.3 mm Mounting: 1/2-inch compatible Recommended System Setup Setup Connection Integrated Amplifier Turntable → MM Phono Input → Amplifier → Speakers External Phono Stage Turntable → MM Phono Stage → Line Input → Amplifier → Speakers What's in the boxAT-VM95E cartridge pre-mounted on AT-HS6 headshellDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/downloadAdditional Product ContentAudio-Technica VM95 Series Comparison Feature AT-VM95E AT-VM95EN AT-VM95ML AT-VM95SH Stylus Bonded elliptical Nude elliptical Nude MicroLinear Nude Shibata Frequency Response 20–22,000 Hz 20–23,000 Hz 20–25,000 Hz 20–25,000 Hz Best Use Accessible everyday playback Balanced detail upgrade Precise tracking and low inner-groove distortion Rich detail and extended groove contact

    Read more

    $141.55

    View options

  • Audio-Technica-AT6180a – image 1 Audio-Technica-AT6180a – image 2

    View options

    audio-technica Audio-Technica-AT6180a

    Audio-Technica AT6180a is a combined stroboscopic speed-check disc and cartridge overhang guide for turntable setup.It helps verify 33⅓ and 45 rpm operation at 50 or 60 Hz and provides a reference for cartridge overhang adjustment.Why it stands out50/60 Hz Stroboscopic ScaleSupports turntable speed checking in different mains-frequency regions.33⅓ and 45 rpm ReferenceCovers the two principal LP and single playback speeds.Overhang Adjustment GuideAdds a cartridge setup reference in the same tool.Non-Electronic Setup DiscWorks as a visual calibration aid without batteries.Best for Checking turntable speed 33⅓ and 45 rpm turntables Cartridge overhang setup Turntable maintenance and calibration Not ideal for 78 rpm speed checking Automatically correcting speed errors Replacing a full cartridge alignment protractor for every tonearm geometry EMiUZEK Buying Notes AT6180a is a visual setup tool and does not adjust turntable speed automatically. Read the correct 50 or 60 Hz scale under a suitable mains-referenced light source. Follow the turntable or tonearm instructions when setting overhang. FAQWhich speeds can it check?33⅓ and 45 rpm.Does it support both 50 and 60 Hz?Yes.Can it correct turntable speed?No. It only provides a visual reference.Does it replace every alignment protractor?No. Use the geometry specified by the turntable or tonearm manufacturer.HOW TO CONNECTSpeed CheckSource icon: deviceSource: Rotating Turntable PlatterConnection: Stroboscopic Disc Under Suitable LightOutput connection: Read Correct 50/60 Hz ScaleTarget icon: deviceOutput: Speed ReferenceNote: Select the scale matching the speed and local mains frequency.Overhang CheckSource icon: deviceSource: Mounted CartridgeConnection: Overhang GuideOutput connection: Adjust Cartridge PositionTarget icon: deviceOutput: Tonearm SetupNote: Follow the turntable or tonearm specification for the required overhang.Technical SpecificationsCalibration Product Type: Stroboscopic disc and overhang guide Speed Scales: 33⅓ rpm / 45 rpm Frequency Scales: 50 Hz / 60 Hz Additional Function: Cartridge overhang guide Recommended System Setup Setup Connection Speed Calibration Platter → AT6180a → Suitable Light → Read Strobe Scale Cartridge Setup Headshell / Cartridge → Overhang Guide → Adjust Position What's in the boxAT6180a stroboscopic disc and overhang guideDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/download

    Read more

    $30.40

    View options

  • Audio-Technica-AT618a – 618a

    View options

    audio-technica Audio-Technica-AT618a

    Audio-Technica AT618a is a 600 g record stabilizer with a brass core and shock-absorbing rubber housing.It holds the record firmly against the platter to improve physical stability during playback on compatible turntables.Why it stands out600 g Stabilizing MassProvides substantial downward mass to hold a record firmly on the platter.Brass CoreUses a dense machined core for consistent weight.Rubber Outer HousingAdds grip and helps damp handling and surface contact.Simple PlacementRequires no electrical connection or permanent installation.Best for Compatible turntables rated for a 600 g stabilizer Improving record-to-platter contact Stationary home vinyl systems Users wanting a removable record weight Not ideal for Turntables whose bearings or suspension are not rated for the added mass Automatic turntables with clearance conflicts Portable or lightweight turntables EMiUZEK Buying Notes AT618a adds 600 g to the platter system; confirm turntable bearing, suspension, motor, and spindle-clearance compatibility. It is a record stabilizer, not a clamp and not a speed-control device. Remove and place it carefully to avoid damaging the record, spindle, or stylus. FAQHow heavy is it?600 g.Will it work with every turntable?No. Confirm the turntable supports the added mass and has sufficient spindle and cover clearance.Does it clamp to the spindle?No. It is a weighted stabilizer.Does it correct warped records?It may improve center contact on some records, but it is not a guaranteed warp-correction device.Can it be used on suspended turntables?Only if the turntable manufacturer confirms compatibility with the additional mass.HOW TO CONNECTRecord Stabilizer UseSource icon: deviceSource: Vinyl Record on Compatible TurntableConnection: Place AT618a Over SpindleOutput connection: Added Platter MassTarget icon: deviceOutput: Stabilized RecordNote: Stop the platter before placement or removal and keep the stylus clear.Technical SpecificationsPhysical Product Type: Record stabilizer Weight: 600 g Core Material: Brass Outer Housing: Shock-absorbing rubber Recommended System Setup Setup Connection Playback Compatible Turntable → Record → AT618a Stabilizer → Playback What's in the boxAT618a record stabilizerDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/download

    Read more

    $60.89

    View options

  • Audio-Technica-AT615a – main view 05 Audio-Technica-AT615a – detail view 01

    View options

    audio-technica Audio-Technica-AT615a

    Audio-Technica AT615a is a machined-aluminum turntable level for checking horizontal setup.It provides a simple reference for leveling the turntable before cartridge alignment and playback.Why it stands outPrecision Level ReferenceShows whether the turntable surface is horizontally adjusted.Machined Aluminum BodyProvides a rigid, durable housing.Simple Setup ToolSupports proper turntable leveling without electronics.Best for Turntable installation Checking shelf and plinth level Preparing for cartridge alignment Routine setup verification Not ideal for Measuring tracking force Setting cartridge overhang Correcting an unstable or unsuitable support surface by itself EMiUZEK Buying Notes AT615a checks level; it does not adjust the turntable automatically. Place it on the turntable according to the setup procedure and adjust the turntable feet or support surface. Level the turntable before final tonearm and cartridge setup. FAQWhat does it measure?Horizontal turntable level.Does it adjust the turntable?No.Is it a tracking-force gauge?No.When should it be used?During installation and whenever the turntable or support surface is moved.HOW TO CONNECTLevel CheckSource icon: deviceSource: Turntable Plinth or PlatterConnection: Place Level on Reference SurfaceOutput connection: Adjust Turntable Feet or SupportTarget icon: deviceOutput: Level TurntableNote: Check in more than one orientation and complete leveling before cartridge setup.Technical SpecificationsDesign Product Type: Turntable level Housing: Machined aluminum Function: Horizontal leveling reference Recommended System Setup Setup Connection Turntable Setup Support Surface → Turntable → AT615a Level Check → Adjust Feet What's in the boxAT615a turntable levelDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/download

    Read more

    $45.27

    View options

  • Audio-Technica-AT6108 – main view 5 Audio-Technica-AT6108 – detail view 2

    View options

    audio-technica Audio-Technica-AT6108

    Audio-Technica AT6108 is a four-wire high-purity 6N-OFC cartridge lead set for connecting a phono cartridge to a compatible headshell.Its 99.9999% oxygen-free copper conductors and 24-karat gold-plated terminals provide a clean, durable cartridge signal connection.Why it stands out6N-OFC ConductorsUses 99.9999% high-purity oxygen-free copper.24-Karat Gold-Plated TipsSupports durable, corrosion-resistant electrical contact.Four Color-Coded LeadsProvides standard cartridge channel and polarity connections.Best for Replacing worn headshell lead wires Compatible removable-headshell systems Cartridge installation and upgrades Users seeking high-purity OFC leads Not ideal for Fixed-tonearm internal wiring RCA or line-level cable replacement Incompatible cartridge or headshell terminals EMiUZEK Buying Notes AT6108 is a short cartridge-to-headshell lead set, not a phono RCA cable. Do not pull the conductor when installing; grip the terminal carefully. Confirm terminal fit before purchase. FAQHow many wires are included?Four color-coded cartridge leads.What conductor is used?99.9999% high-purity 6N-OFC copper.Are the tips plated?Yes, with 24-karat gold.Will it fit every headshell?Confirm cartridge and headshell terminal compatibility.HOW TO CONNECTCartridge WiringSource icon: deviceSource: Phono Cartridge PinsConnection: Color-Coded Lead WiresOutput connection: Headshell TerminalsTarget icon: deviceOutput: Compatible HeadshellNote: Match channel and polarity markings and install without stressing the conductors.Technical SpecificationsLead Wires Product Type: Cartridge-to-headshell lead-wire set Conductor: 6N-OFC high-purity copper Purity: 99.9999% Wire Construction: 0.12 mm × 29 core strands Terminals: 24-karat gold plated Quantity: Four leads Recommended System Setup Setup Connection Headshell Wiring Cartridge Pins → AT6108 Leads → Headshell Contacts → Tonearm What's in the boxAT6108 lead wires × 4Download CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/download

    Read more

    $83.60

    View options

  • Audio-Technica AT6101 PCOCC – main view 1 Audio-Technica AT6101 PCOCC – detail view 4

    View options

    audio-technica Audio-Technica AT6101 PCOCC

    Audio-Technica AT6101 PCOCC is a four-wire PCOCC cartridge lead set for connecting a phono cartridge to a compatible headshell.Its high-purity single-crystal copper conductors and 24-karat gold-plated terminals provide a quality low-level signal path between cartridge and headshell.Why it stands outPCOCC ConductorsUses high-purity single-crystal copper for cartridge-level signal transfer.24-Karat Gold-Plated TipsProvides corrosion-resistant contact surfaces.Four Color-Coded LeadsSupports standard left/right positive and return cartridge connections.Best for Replacing worn headshell lead wires Compatible removable-headshell systems Cartridge installation and upgrades Users requiring PCOCC leads Not ideal for Fixed-tonearm wiring repairs Digital or line-level audio connections Headshells or cartridges with incompatible terminal sizes EMiUZEK Buying Notes AT6101 is a cartridge-to-headshell lead-wire set, not an RCA interconnect. Handle the connectors rather than pulling the fine conductors. Confirm terminal size and headshell access before purchase. FAQHow many lead wires are included?The set provides four cartridge lead wires.Is this an RCA cable?No.Are the contacts gold plated?The lead tips use 24-karat gold plating.Will it fit every cartridge?Check cartridge and headshell terminal compatibility.HOW TO CONNECTCartridge WiringSource icon: deviceSource: Phono Cartridge PinsConnection: Color-Coded Lead WiresOutput connection: Headshell TerminalsTarget icon: deviceOutput: Compatible HeadshellNote: Connect each lead according to the cartridge channel and polarity markings without pulling the wire itself.Technical SpecificationsLead Wires Product Type: Cartridge-to-headshell lead-wire set Conductor: PCOCC high-purity copper Wire Construction: 0.12 mm × 29 core strands Terminals: 24-karat gold plated Quantity: Four leads Recommended System Setup Setup Connection Headshell Wiring Cartridge Pins → AT6101 Leads → Headshell Contacts → Tonearm What's in the boxAT6101 PCOCC lead wires × 4Download CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/download

    Read more

    $27.55

    View options

  • Audio-Technica AT6006R – main view 1 Audio-Technica AT6006R – detail view 6

    View options

    audio-technica Audio-Technica AT6006R

    Audio-Technica AT6006R is an automatic hydraulic tonearm safety raiser for compatible manual and semi-automatic turntables.It lifts the tonearm at the end of a record to reduce unnecessary stylus wear when the turntable does not provide automatic return.Why it stands outAutomatic End-of-Record LiftRaises the tonearm after playback reaches the run-out area.Hydraulic DampingProvides smooth lifting through a rubber-covered lift bar.Adjustable Installation HeightSupports a range of tonearm heights for compatible turntables.Stylus ProtectionReduces prolonged stylus contact in the run-out groove.Best for Manual turntables without auto-lift Semi-automatic turntables needing end-of-record protection Users who may not reach the turntable immediately Compatible decks with sufficient mounting space Not ideal for Turntables without suitable mounting space Fully automatic turntables that already lift and return the arm Installations where the raiser interferes with tonearm travel EMiUZEK Buying Notes AT6006R lifts the tonearm but does not return it to the armrest. Compatibility depends on available mounting space, tonearm path, and installation height. Careful positioning is essential so it activates near the end of the record without affecting normal playback. FAQDoes it return the tonearm to the rest?No. It raises the arm only.Will it fit every turntable?No. Check available space, tonearm geometry, and height.Does it require electricity?No. It uses a mechanical hydraulic lifting action.Can it be used with an automatic turntable?It is generally unnecessary when the turntable already provides automatic lift and return.Will it affect playback?Correct installation should keep it clear during normal playback until the run-out area.HOW TO CONNECTTurntable InstallationSource icon: deviceSource: Compatible Turntable PlinthConnection: Position Beside Tonearm PathOutput connection: Hydraulic Lift BarTarget icon: deviceOutput: TonearmNote: Test placement carefully before final use and confirm the trigger point with a non-critical record.Technical SpecificationsInstallation Product Type: Automatic tonearm safety raiser Lift Method: Hydraulic Compatible Tonearm Height Range: 27–39 mm Base Diameter: 14 mm Recommended System Setup Setup Connection Manual Turntable AT6006R beside Tonearm → Automatic Lift at Record End What's in the boxAT6006R tonearm safety raiserDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/download

    Read more

    $146.18

    View options

  • Audio-Technica AT-LH15H – technicaat lh15h 01 Audio-Technica AT-LH15H – technicaat lh15h 02

    View options

    audio-technica Audio-Technica AT-LH15H

    Audio-Technica AT-LH15H is a 15 g universal headshell with adjustable cartridge mounting holes and OFC lead wires.Its medium-mass design supports cartridge and tonearm matching while providing accurate overhang adjustment and secure installation.Why it stands out15 g Medium-Mass DesignProvides a middle weight option within the AT-LH H-series for system matching.Adjustable OverhangSlotted holes allow accurate cartridge positioning.OFC Lead WiresCarries the low-level cartridge signal through quality internal connections.Universal Detachable FormatConnects to compatible four-pin bayonet tonearms.Best for Compatible detachable-headshell tonearms Cartridge installations requiring a 15 g headshell Systems needing adjustable overhang Users tuning headshell mass for system matching Not ideal for Fixed-headshell tonearms P-mount turntables Tonearms that cannot balance the total installed mass EMiUZEK Buying Notes AT-LH15H is a headshell only; a cartridge is not included. Confirm the tonearm can balance the headshell plus cartridge mass. Final cartridge wiring, alignment, overhang, tracking force, and anti-skate setup are required. FAQDoes it include a cartridge?No.Will it fit every tonearm?No. It requires a compatible universal four-pin bayonet connector.What distinguishes it from AT-LH13H and AT-LH18H?The principal difference is headshell mass: 15 g is the medium option.Can overhang be adjusted?Yes.Does installation require setup?Yes. Cartridge alignment and tonearm settings must be checked.HOW TO CONNECTCartridge InstallationSource icon: deviceSource: Compatible 1/2-inch CartridgeConnection: Mounting Screws and Lead WiresOutput connection: Universal Headshell ConnectorTarget icon: deviceOutput: Turntable TonearmNote: Complete cartridge mounting and alignment before use.Technical SpecificationsHeadshell Product Type: Universal detachable headshell Weight: 15 g Cartridge Mount: 1/2-inch compatible Lead Wires: OFC Overhang: Adjustable Connector: Compatible universal four-pin bayonet Recommended System Setup Setup Connection Turntable Cartridge → AT-LH15H → Compatible Tonearm → Phono Stage What's in the boxAT-LH15H headshellDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/download

    Read more

    $94.05

    View options

  • Audio-Technica AT-LH18H – main view 1 Audio-Technica AT-LH18H – detail view 2

    View options

    audio-technica Audio-Technica AT-LH18H

    Audio-Technica AT-LH18H is an 18 g universal headshell with adjustable cartridge mounting holes and OFC lead wires.Its heavier design supports tonearm and cartridge combinations that require greater headshell mass while retaining precise overhang adjustment.Why it stands out18 g Higher-Mass DesignProvides the heaviest option among the AT-LH13H, AT-LH15H, and AT-LH18H models.Adjustable OverhangSlotted holes support precise cartridge position.OFC Lead WiresMaintains quality low-level signal connections.Universal Detachable FormatFits compatible four-pin bayonet tonearms.Best for Compatible tonearms designed for a heavier headshell Cartridge combinations requiring an 18 g headshell Systems needing adjustable overhang Experienced users matching tonearm and cartridge mass Not ideal for Tonearms with limited counterweight capacity Fixed-headshell tonearms P-mount turntables EMiUZEK Buying Notes AT-LH18H is a headshell only; a cartridge is not included. Its 18 g mass is not automatically better—confirm tonearm balance and resonance compatibility. Final cartridge mounting, alignment, tracking force, and anti-skate setup are required. FAQDoes it include a cartridge?No.Will it fit every tonearm?No. Connector and counterweight compatibility must be confirmed.Why choose the 18 g version?It is intended for systems that require a heavier headshell for correct matching and balance.Can overhang be adjusted?Yes.Is a heavier headshell always better?No. Headshell mass must suit the tonearm and cartridge combination.HOW TO CONNECTCartridge InstallationSource icon: deviceSource: Compatible 1/2-inch CartridgeConnection: Mounting Screws and Lead WiresOutput connection: Universal Headshell ConnectorTarget icon: deviceOutput: Turntable TonearmNote: Confirm counterweight capacity before installation and complete alignment afterward.Technical SpecificationsHeadshell Product Type: Universal detachable headshell Weight: 18 g Cartridge Mount: 1/2-inch compatible Lead Wires: OFC Overhang: Adjustable Connector: Compatible universal four-pin bayonet Recommended System Setup Setup Connection Turntable Cartridge → AT-LH18H → Compatible Tonearm → Phono Stage What's in the boxAT-LH18H headshellDownload CenterAccess product manuals, firmware updates, and additional support resources.https://emiuzek.com/pages/download

    Read more

    $103.55

    View options

  • FiiO TT13 FiiO TT13 – sku tt13 silver bluetooth

    View options

    Fiio FiiO TT13

    The FiiO TT13 is a fully automatic belt-drive turntable designed for straightforward vinyl playback. Press Start and the tonearm lifts, moves into position and begins playing; at the end, it can stop and return automatically. Repeat playback and remote control make it especially convenient for everyday listening. A built-in phono preamplifier provides fixed RCA line output for direct connection to active speakers or a line-level amplifier input. The Bluetooth version can also transmit vinyl audio wirelessly to compatible headphones or speakers, while the Standard version is intended for wired RCA listening. Why it stands out Fully automatic playback with repeat Automatic start, stop, tonearm return and loop playback reduce handling and make vinyl easier to use without manually cueing every side. Built-in analog phono preamplifier Dual JRC5532 op-amps provide an RCA line-level output up to 800mV, allowing direct connection to active speakers or a standard line input. Audio-Technica AT3600LA cartridge The fitted moving-magnet cartridge is widely supported, with a replaceable stylus and factory-optimized tracking force for the automatic tonearm. Optional aptX HD Bluetooth transmission The Bluetooth version uses a Qualcomm QCC3040 platform and supports SBC, aptX, aptX Low Latency and aptX HD transmission. Best for First-time vinyl listeners who want automatic, low-effort operation Direct connection to active speakers or an amplifier's AUX/LINE input Users who value remote start, stop, repeat and tonearm control Wireless listening through compatible Bluetooth headphones or speakers when choosing the Bluetooth version Not ideal for Users who want adjustable tracking force, anti-skate or broad cartridge experimentation Systems that require a raw PHONO-level output for an external phono stage Anyone who wants to digitize records through USB Buyers expecting Bluetooth transmission from the Standard version EMiUZEK Buying Notes Choose the variant carefully: only the Bluetooth version can transmit audio wirelessly. Color and regional power-plug options are separate variant selections. The TT13 provides fixed RCA LINE output only, not switchable PHONO output. Connect it to AUX, LINE, CD or another line-level input—not to a phono input. The automatic mechanism is calibrated for the supplied Audio-Technica AT3600LA cartridge at 3.5 ± 0.5g. FiiO recommends replacing it only with the same cartridge model. Place the turntable on a level, stable surface away from speakers and vibration. Confirm the correct 7/12-inch size and 33⅓/45 RPM settings before playback. Frequently asked questions Do all FiiO TT13 versions include Bluetooth? No. Bluetooth transmission is available only on variants labelled Bluetooth. The Standard version uses wired RCA output only. Is Bluetooth an input or an output? It is an output. The Bluetooth version transmits record playback to compatible headphones, speakers or receivers; it does not receive music from a phone. Which Bluetooth codecs are supported? The Bluetooth 5.2 version supports SBC, aptX, aptX Low Latency and aptX HD. The receiving device must support the same codec, otherwise the connection falls back to a mutually supported format. Does Bluetooth preserve a completely analog signal path? No. RCA playback follows the analog signal path, while Bluetooth transmission requires analog-to-digital conversion and wireless encoding. Do I need a separate phono preamp? No. The built-in phono stage outputs line level. Connect RCA directly to active speakers or a LINE/AUX input. Can I connect the TT13 to a PHONO input? It is not recommended because the TT13 does not provide raw phono-level output. Feeding its line-level signal into another phono stage can cause excessive gain and incorrect equalization. Can it drive passive speakers directly? No. Passive speakers require an integrated amplifier or power amplifier. The TT13 can connect directly only to active speakers or line-level equipment. Can I connect wired headphones directly? No. There is no headphone output. Use a headphone amplifier with RCA input, or choose the Bluetooth version for compatible wireless headphones. Is the TT13 fully automatic? Yes. It supports automatic start, stop, tonearm movement and return, plus repeat playback. Manual cueing is also possible when needed. Which record sizes and speeds are supported? It supports 7-inch and 12-inch records at 33⅓ or 45 RPM. A large-hole 45 RPM adapter is included. Can it play 10-inch records? The automatic size selector is specified for 7-inch and 12-inch records. A 10-inch record may require careful manual cueing and is not part of the stated automatic-size support. Can I install a different cartridge? FiiO recommends only the same AT3600LA model because the automatic tonearm and tracking force are factory-calibrated for it. Other cartridges are not supported. Can I replace only the stylus? Yes. The stylus is a consumable part and can be replaced with a compatible stylus for the AT3600LA cartridge. Stylus wear is not covered by the product warranty. Can tracking force and anti-skate be adjusted? No user adjustment is provided. Tracking force is factory-set to approximately 3.5 ± 0.5g for the supplied cartridge. Can the TT13 convert records to digital files? No. It does not include USB recording or vinyl-ripping functionality. Why does the platter appear to wobble slightly? First confirm that the cast-aluminum platter is seated correctly and rotates freely. If movement is excessive or audible, stop playback and reseat the platter rather than forcing the mechanism. What does the rear balance control do? It compensates for small left/right level differences in the analog output. Leave it centred unless one channel is consistently louder after checking the cables and speakers. Can I use an external DC power supply? Yes. Use a suitable 12V/1A or higher supply and turn off the AC power switch when using DC. If AC and DC are connected together, AC takes priority. Does the dust cover need to be removed during playback? No. It can be used open or closed and is removable. If acoustic feedback occurs at high speaker volume, try closing it, removing it or moving the turntable farther from the speakers. HOW TO CONNECT Active speakers Source icon: Vinyl recordSource: 7-inch or 12-inch recordConnection: AT3600LA cartridge and built-in phono preamplifierOutput connection: Stereo RCA line outputTarget icon: Active speakersOutput: RCA input on powered speakers Note: Use a LINE/AUX input, start with low speaker volume and connect the supplied ground wire if the speaker system provides a grounding terminal. Integrated amplifier or receiver Source icon: Vinyl recordSource: TT13 analog playbackConnection: Built-in phono preamplifierOutput connection: Stereo RCA line outputTarget icon: AmplifierOutput: AUX / LINE / CD input Note: Do not use the amplifier's PHONO input because the TT13 already outputs an equalized line-level signal. Wired headphone system Source icon: Vinyl recordSource: TT13Connection: RCA line outputOutput connection: RCA cableTarget icon: Headphone amplifierOutput: Wired headphones through a separate headphone amplifier Note: The TT13 has no headphone socket or volume control; adjust listening level on the connected headphone amplifier. Bluetooth headphones or speakers Source icon: Vinyl recordSource: TT13 Bluetooth versionConnection: Bluetooth 5.2 transmissionOutput connection: SBC / aptX / aptX LL / aptX HDTarget icon: Wireless headphones or speakerOutput: Wireless vinyl playback Note: Hold Pairing for three seconds, place the receiving device in pairing mode and keep nearby devices from entering pairing mode accidentally. Technical Specifications Feature Specification Product type Fully automatic belt-drive turntable with built-in phono preamplifier Cartridge Audio-Technica AT3600LA moving magnet Tracking force 3.5 ± 0.5g Analog stage 2 × JRC5532 op-amps Drive mechanism Custom automatic mechanism; internal gear drive and platter belt drive Speeds 33⅓ and 45 RPM Record sizes 7-inch and 12-inch automatic selection Wow and flutter ≤0.15% WRMS at 33⅓ RPM, 3kHz Analog output Fixed stereo RCA line output only Line-output level ≥800mV + 800mV at 1kHz/0dB test record Bluetooth version 5.2 on Bluetooth variant; Qualcomm QCC3040 Bluetooth transmit codecs SBC, aptX, aptX LL, aptX HD Remote control Included infrared remote Lighting Seven colors plus Off; adjustable brightness Power AC 100–240V, 50/60Hz or DC 12V/1A or higher Dimensions Approx. 450 × 350 × 114mm Weight Approx. 3.85kg Colors Black / White / Silver What's in the box, manuals and downloads FiiO TT13 with Cast-Aluminum Platter ×1 Platter Mat ×1 Regional Power Cord ×1 RCA Audio Cable with Ground Wire ×1 Infrared Remote Control ×1 Quick Start Guide ×1 Warranty Card ×1 Large-Hole 45 RPM Record Adapter ×1 Visit the EMiUZEK download center. Additional Product Content Standard or Bluetooth version? Feature Standard Bluetooth RCA line output Yes Yes Bluetooth transmission No Yes Supported wireless codecs Not applicable SBC, aptX, aptX LL, aptX HD Best for Wired active speakers or amplifier systems Wired systems plus optional wireless headphones or speakers

    Read more

    $245.97 - $289.99

    View options

  • Dual CS 418 Dual CS 418 – product detail 2

    View options

    Dual Dual CS 418

    Dual CS 418 is the entry point to Dual's manual CS range, pairing an MDF plinth and aluminium platter with an Ortofon 2M Red. Its switchable MM phono stage supports both simple line-level systems and future external phono upgrades.Why it stands outOrtofon 2M Red includedA respected elliptical MM cartridge provides a capable starting point without an immediate cartridge purchase.Three-speed manual playbackElectronic 33, 45 and 78 RPM selection covers modern LPs, singles and suitable 78 RPM records.Switchable MM phono stageConnect to a line input now or bypass the internal stage for a dedicated MM phono input.Upgrade-friendly tonearmAdjustable tracking force, antiskating and a removable headshell support compatible cartridge changes.Best for Listeners who enjoy manual cueing First serious Hi-Fi turntables Systems with line or MM phono inputs Users planning future cartridge upgrades Not ideal for One-button automatic playback Bluetooth speaker systems without analog input Users wanting automatic end-of-record lift Product Details and Setup ViewsEMiUZEK Buying Notes For 78 RPM records, fit a cartridge/stylus specifically designed for 78s; the supplied 2M Red is for microgroove records. Match the rear phono/line setting to the receiving input to avoid very low or distorted output. Balance the tonearm and set tracking force before first playback. Frequently asked questionsIs the CS 418 automatic?No. It is a manual turntable with a damped cueing lift.Is a phono preamp built in?Yes. The MM phono preamp can be switched in or bypassed.Which cartridge is supplied?An Ortofon 2M Red is factory installed.Can it play 78 RPM?Yes, but use a suitable 78 RPM stylus or cartridge.Can I replace the cartridge?Yes. The removable headshell accepts compatible cartridges weighing 5 to 9 g.Does it have Bluetooth?No. Audio output is analog RCA.HOW TO CONNECTPowered speakersSource: RecordConnection: Internal phono stage set to LINEOutput connection: RCA cable to speaker line inputIntegrated amplifierSource: RecordConnection: Internal phono stage set to LINEOutput connection: RCA cable to AUX/CD inputExternal MM phono stageSource: RecordConnection: Internal phono stage bypassedOutput connection: RCA to phono stage, then amplifierTechnical Specifications Feature Specification Operation Manual Drive DC motor, belt drive Speeds 33 / 45 / 78 RPM Wow and flutter < ±0.1% (DIN rated) Cartridge Ortofon 2M Red Tonearm Straight aluminium; ball-bearing; removable headshell Tracking range 0–4 g; compatible cartridge mass 5–9 g Platter 305 mm die-cast aluminium; 850 g including mat Output RCA sockets; switchable phono/line Dimensions / weight 435 × 367 × 145 mm; 5.8 kg Additional Product ContentComparison: Dual CS 418 vs Dual CS 518 vs Dual CS 429Use the differences below to choose by operation style, drive system and upgrade priorities. Feature Dual CS 418 Dual CS 518 Dual CS 429 Operation Manual Manual Fully automatic Tonearm bearing Ball-bearing Twin-gimbal, four pivot bearings Ball-bearing Cartridge Ortofon 2M Red Ortofon 2M Red Ortofon 2M Red Built-in MM phono Switchable Switchable Switchable Best reason to choose Lowest-cost manual CS model Higher-grade tonearm Automatic convenience

    Read more

    $474.05

    View options

  • Dual CS 329 Dual CS 329 – product detail 2

    View options

    Dual Dual CS 329

    Dual CS 329 is a fully automatic, plug-and-play belt-drive turntable for uncomplicated vinyl listening. Factory-set operation, a switchable MM phono stage and an Audio-Technica AT91 cartridge make it easy to connect and use.Why it stands outTrue one-button playbackThe tonearm starts, lowers, lifts and returns automatically, while manual cueing remains available.Factory-set simplicityTracking force and cartridge setup are fixed at the factory to reduce first-time setup errors.Flexible amplifier matchingThe switchable phono preamp works with either a PHONO input or a standard line/AUX input.Resonance-aware constructionAn aluminium platter, rubber mat and elastomer-damped feet support stable everyday playback.Best for First-time vinyl listeners Simple living-room systems Powered speakers with an analog input Amplifiers with or without a PHONO input Not ideal for Cartridge-tuning enthusiasts 78 RPM records Listeners requiring Bluetooth or USB audio Product Details and Setup ViewsEMiUZEK Buying Notes Use PHONO mode only with an amplifier's PHONO input; use LINE mode with AUX, CD or powered speakers. The factory-set tracking force is not intended for broad cartridge swapping. This model plays 33 and 45 RPM records only. Frequently asked questionsIs it fully automatic?Yes. Start, cueing, end-of-record lift and return can operate automatically.Does it have a phono preamp?Yes. The built-in MM stage is switchable for PHONO or LINE connection.Which cartridge is installed?Dual specifies an Audio-Technica AT91 cartridge.Can I operate it manually?Yes. Manual playback is possible in addition to automatic operation.Does it play 78 RPM records?No. It supports 33 and 45 RPM.Can it connect directly to powered speakers?Yes, when the speakers have an analog line input and the turntable is set to LINE.HOW TO CONNECTPowered speakersSource: RecordConnection: Built-in phono preamp set to LINEOutput connection: Fixed RCA cable to powered speakersAmplifier with AUX inputSource: RecordConnection: Built-in phono preamp set to LINEOutput connection: Fixed RCA cable to AUX/LINE inputAmplifier with PHONO inputSource: RecordConnection: Phono preamp set to PHONO/bypassOutput connection: Fixed RCA cable to MM PHONO inputTechnical Specifications Feature Specification Operation Fully automatic or manual Drive DC motor, belt drive Speeds 33 / 45 RPM Wow and flutter < ±0.12% (JIS weighted) Cartridge Audio-Technica AT91 Tonearm Straight aluminium; ball-bearing; fixed stylus pressure Platter 297 mm die-cast aluminium; 667 g including mat Output Fixed RCA cable; switchable phono/line Dimensions 435 × 372 × 132 mm with dust cover closed Weight 5.0 kg Additional Product ContentComparison: Dual CS 329 vs Dual CS 429 vs Dual CS 418Use the differences below to choose by operation style, drive system and upgrade priorities. Feature Dual CS 329 Dual CS 429 Dual CS 418 Operation Fully automatic; factory-set Fully automatic; adjustable Manual Speeds 33/45 33/45/78 33/45/78 Cartridge Audio-Technica AT91 Ortofon 2M Red Ortofon 2M Red Tonearm setup Fixed Adjustable force and antiskating Adjustable force and antiskating Best reason to choose Maximum simplicity Automatic use with upgrade scope Lower-cost manual control

    Read more

    $341.05 - $359.00

    View options

You have seen 24 out of 27 products

Show more products

All Turntables – Classic Analog Sound for Modern Music Lovers

Turntables bring the warmth, texture and authenticity of vinyl into your home audio system. Whether you're discovering vinyl for the first time or building a premium analog setup, our collection of turntables includes belt-drive and direct-drive models, with or without built-in phono preamps, designed to deliver rich, detailed and immersive sound.

This category gathers all vinyl players for every listening style—from minimalist setups to audiophile-level analog systems.

What Is a Turntable?

A turntable is an analog playback device that reads the grooves of a vinyl record using a stylus and cartridge, converting the mechanical signal into music. Compared to digital audio, vinyl offers a warmer, more natural sound with a unique character that many listeners love.

Turntables in this collection include:

  • Models with built-in phono preamps

  • Models that require an external phono stage

  • Belt-drive turntables for smooth rotation

  • Direct-drive turntables for precision and DJ-style stability

  • High-quality tonearms, platters and cartridges for improved accuracy

They are suitable for both casual listeners and serious vinyl collectors.

Key Features of Turntables

Built-in vs. External Phono Preamps

Some turntables include a built-in phono stage, allowing direct connection to powered speakers, amplifiers or streaming amplifiers.
Models without built-in preamps offer greater upgrade flexibility and improved sound quality with external stages.

Belt-Drive and Direct-Drive Designs

  • Belt-drive turntables reduce vibration and deliver clean, warm analog playback.

  • Direct-drive turntables provide stronger torque, greater speed accuracy and long-term durability.

Cartridge Options

Turntables support:

  • MM (Moving Magnet) cartridges – common and user-friendly

  • MC (Moving Coil) cartridges – for advanced audiophiles seeking higher resolution

Many models allow cartridge upgrades to further enhance performance.

Premium Analog Sound

A well-designed turntable offers:

  • Rich midrange

  • Natural treble

  • Smooth bass response

  • Wide and engaging soundstage

Perfect for listeners who value musical realism.

Types of Turntables in This Collection

Turntables with Built-in Phono Preamps

Ideal for beginners and simple setups—just connect and play.

Audiophile Turntables Without Phono Stage

Designed for users who want maximum control, customization and upgrade paths.

Belt-Drive Turntables

Perfect for home listening with low noise and smooth operation.

Direct-Drive Turntables

Preferred for precision, stability and professional or DJ applications.

Modern Streaming-Compatible Turntables

Some models offer Bluetooth or USB output for hybrid analog-digital listening.

Perfect for Home Audio and Hi-Fi Systems

Turntables integrate easily with:

  • Integrated amplifiers

  • Streaming amplifiers

  • Power amplifiers + phono preamp

  • Bookshelf / floor-standing speakers

  • Headphone listening setups

  • Vinyl ripping / digitization systems

Whether building a minimalist vinyl corner or a complete analog chain, turntables bring your music to life.

Rediscover Music with the Warmth of Vinyl

Explore our All Turntables collection and find the perfect vinyl player for your style. Enjoy detailed analog sound, timeless design and an immersive listening experience that digital systems can’t replicate.

Featured products

Share information and details about these products

Recently viewed products

    © 2026 EMiUZEK, Powered by Shopify

    • PayPal

    Login

    Forgot your password?

    Don't have an account yet?
    Create account