Audio-Technica AT-VM520xEB/H combines an AT-VM520xEB dual moving magnet cartridge with a bonded elliptical stylus, pre-mounted on an AT-LT10 universal headshell.

It offers a convenient upgrade for compatible detachable-headshell tonearms, with factory assembly reducing installation work while retaining adjustable cartridge positioning.

Why it stands out

Pre-Mounted Cartridge and Headshell

Combines the cartridge and AT-LT10 headshell in one assembled package for faster installation on compatible tonearms.

Bonded Elliptical Stylus

Provides more precise groove contact than a conical stylus for balanced detail and dependable everyday vinyl playback.

Adjustable AT-LT10 Headshell

Elongated through-holes allow cartridge positioning and overhang adjustment for correct turntable setup.

Interchangeable AT-VMx Stylus System

Supports compatible stereo AT-VMx replacement styli for maintenance or a future stylus-profile upgrade.

Best for

• Compatible turntables with a detachable universal headshell
• Users wanting a pre-mounted cartridge upgrade
• Everyday stereo vinyl listening
• Systems using an MM phono input

Not ideal for

• Turntables with a fixed headshell or incompatible tonearm connector
• P-mount turntables
• Systems without an MM-compatible phono input or external MM phono stage
• Users whose tonearm cannot accommodate the 18.3 g cartridge-and-headshell assembly

EMiUZEK Buying Notes

• AT-VM520xEB/H includes the AT-VM520xEB cartridge pre-mounted on an AT-LT10 universal headshell; it is not the cartridge-only AT-VM520xEB package.
• Verify tonearm connector compatibility, assembly weight, overhang, alignment, and tracking-force adjustment before purchase.
• It requires an MM phono input or external MM phono preamplifier and cannot be connected directly to a standard amplifier line input.

FAQ

Is the cartridge already mounted on the headshell?

Yes. The AT-VM520xEB cartridge is supplied pre-mounted on the AT-LT10 headshell, but final overhang, alignment, tracking force, and anti-skate checks are still required.

Will it fit every turntable?

No. It is intended for compatible tonearms that accept a detachable universal headshell. Check the tonearm connector and supported assembly weight.

Can it be used on a P-mount turntable?

No. It is not a P-mount cartridge assembly.

What phono stage does it require?

Use an MM-compatible phono input with a recommended load of 47 kΩ and 150–250 pF capacitance.

What is the recommended tracking force?

The specified range is 1.8–2.2 g, with 2.0 g as the standard setting.

Which replacement stylus is the direct match?

The direct replacement is the Audio-Technica AT-VMN20xEB, sold separately.

HOW TO CONNECT

Detachable-Headshell Turntable Setup

Source icon: device
Source: Vinyl Record
Connection: Stylus / Groove
Output connection: Universal Headshell Connector
Target icon: device
Output: MM Phono Input

Note: Install the headshell assembly on a compatible tonearm and verify overhang, alignment, tracking force, and anti-skate before playback.

External Phono Stage Setup

Source icon: device
Source: Turntable
Connection: Tonearm Wiring
Output connection: RCA Phono Cable
Target icon: device
Output: External MM Phono Stage

Note: Connect the phono stage to an amplifier line input; the cartridge-level signal is not intended for a standard line input.

Technical Specifications

Cartridge

• Type: VM dual moving magnet stereo cartridge with headshell
• Frequency Response: 20–23,000 Hz
• Output Voltage: 5.0 mV at 1 kHz, 5 cm/s
• Channel Separation: 24 dB at 1 kHz
• Output Balance: 1.5 dB at 1 kHz
• Vertical Tracking Angle: 20°

Stylus and Tracking

• Stylus: Bonded elliptical
• Stylus Size: 0.3 × 0.7 mil
• Cantilever: Aluminum pipe
• Tracking Force: 1.8–2.2 g; 2.0 g standard
• Static Compliance: 20 × 10⁻⁶ cm/dyne
• Dynamic Compliance: 7 × 10⁻⁶ cm/dyne at 100 Hz
• Replacement Stylus: AT-VMN20xEB, sold separately

Electrical

• Recommended Load Impedance: 47 kΩ
• Recommended Load Capacitance: 150–250 pF
• Coil Impedance: 3.2 kΩ at 1 kHz
• DC Resistance: 750 Ω
• Coil Inductance: 480 mH at 1 kHz

Headshell Assembly

• Headshell: AT-LT10
• Compatible Cartridge Mount: Universal 1/2-inch, 4-pin cartridge mounting
• Assembly Dimensions: 21.5 × 18.5 × 68.4 mm
• Assembly Weight: 18.3 g

Recommended System Setup

What's in the box

• AT-VM520xEB cartridge pre-mounted on AT-LT10 headshell

Download Center

Access product manuals, firmware updates, and additional support resources.

https://emiuzek.com/pages/download

Additional Product Content

Audio-Technica AT-VMx Cartridge Comparison