Sonos Outdoor Speaker(Pair)
Sonos Outdoor Speaker(Pair)
$607.05
- Authorized Dealer · Tech Support · See Return Policy
👏Buy 2 Save 8% · Buy 3 Save 10% Auto
Why it stands out
Best for
Not ideal for
Shop with confidence
Why buy from EMiUZEK
We help you choose, connect and maintain your system—not just ship a box.
- Authentic products
- Compatibility guidance
- Fast tracked shipping
- Firmware and driver support
- Clear warranty process
- Responsive after-sales help
Setup guide
How to connect
What you should know
EMiUZEK buying notes
Frequently asked questions
View full technical specifications
Official product information provided by sonos
The following product descriptions, specifications and images are provided by the manufacturer.
Bring a permanently installed passive stereo system to a patio, garden or covered outdoor area. These Sonos Architectural speakers by Sonance combine an IP66 enclosure with an 8-ohm load and are optimized for use with Sonos Amp.
Why it stands out
IP66 outdoor construction
Built for dust, water, humidity, salt spray, heat, UV exposure and freezing conditions.
Purpose-built acoustic design
A pivoting high-excursion woofer and one-inch tweeter cover 55 Hz–20 kHz.
Sonos Amp optimization
The Sonos app can apply dedicated DSP when the speakers are used with Sonos Amp.
Installation-ready pair
Grilles, FastMount brackets and terminal covers support a permanent outdoor setup.
Best for
- Patios and gardens
- Covered outdoor entertaining areas
- Permanent wired outdoor audio
- Sonos Amp systems
- Stereo outdoor zones
Not ideal for
- Portable or battery-powered use
- Direct connection to phones or Wi-Fi without an amplifier
- Sub-bass-focused systems without a subwoofer
- Installations without weather-rated speaker cable and safe routing
EMiUZEK Buying Notes
- These are passive speakers and require an amplifier; Sonos Amp is the recommended match.
- Use 16 AWG or larger outdoor-rated speaker cable and weather-safe routing.
- The 5–130 W figure is power handling, not built-in amplifier output.
FAQ
Are these wireless speakers?
No. They are passive speakers and require speaker cable connected to an amplifier.
Are they waterproof?
They are IP66 weatherproof and dustproof, but should still be installed according to the outdoor installation guide.
What amplifier should I use?
They are optimized for Sonos Amp; another suitable amplifier must support an 8-ohm load and appropriate power.
Can one Sonos Amp power multiple pairs?
Follow Sonos Amp impedance and architectural-speaker guidance; do not combine loads without checking the total impedance.
What is the frequency response?
Sonos lists 55 Hz–20 kHz at ±3 dB.
Are mounting brackets included?
Sonos lists a pair of FastMount brackets, grilles and wiring-terminal covers with the speaker pair.
Can they stay outdoors in winter?
The official operating specification covers -13°F to 149°F / -25°C to 65°C when properly installed.
Do they support Trueplay?
With Sonos Amp, Optimize Sonos Speakers applies dedicated tuning; Trueplay availability depends on the supported architectural setup.
HOW TO CONNECT
- Wire to amplifier — Run 16 AWG or larger outdoor-rated speaker cable from each speaker to a suitable amplifier.
- Mount and seal — Install the FastMount brackets, secure each speaker and fit the terminal covers.
- Optimize in Sonos — When used with Sonos Amp, select the matching Sonos Architectural speaker type in the app.
Technical Specifications
| Feature | Specification |
|---|---|
| Product type | Passive outdoor speakers, pair |
| Design partner | Sonance |
| Woofer | One high-excursion pivoting woofer per speaker |
| Tweeter | One-inch tweeter per speaker |
| Frequency response | 55 Hz–20 kHz (±3 dB) |
| Nominal impedance | 8 ohms |
| Sensitivity | 89 dB SPL (2.83 V / 1 m) |
| Power handling | 5 W minimum; 130 W maximum |
| Weather rating | IP66; Mil Spec 810 environmental conformity |
| Temperature range | -13°F to 149°F / -25°C to 65°C |
| Dimensions each | 12.96 × 7.52 × 7.83 in / 329.2 × 191 × 199 mm |
| Weight each | 8.82 lb / 4 kg |
| Colours | Black; white |
| Finish | Matte |
| Required amplifier | Suitable external amplifier; optimized for Sonos Amp |
| Recommended cable | 16 AWG or larger speaker wire |
Additional Product Content
Comparison: choose the right product
| Decision point | Sonos Outdoor by Sonance | Bowers & Wilkins AM-1 |
|---|---|---|
| System type | Passive installed pair | Passive installed outdoor speakers |
| Weather protection | IP66; Mil Spec 810 environmental conformity | Weather-resistant design |
| Nominal impedance | 8 ohms | 8 ohms |
| Best when | You want Sonos Amp optimization and IP66 specification | You prefer Bowers & Wilkins voicing |
What's in the box, manuals and downloads
Shipping, warranty and returns
Worldwide Tracked Shipping
We provide tracked international shipping with delivery options and estimated delivery times shown during checkout.
Official Warranty Support
All products sold by EMIUZEK are genuine products with manufacturer warranty support.
Our HiFi specialists provide assistance with compatibility, setup, and technical questions.
Easy Returns
Eligible returns are available according to our return policy.
Please contact EMIUZEK before returning any product so we can provide assistance.