Why it stands out
Best for
Not ideal for
Why buy from EMiUZEK
We help you choose, connect and maintain your system—not just ship a box.
- ✓Authentic products
- ✓Compatibility guidance
- ✓Fast tracked shipping
- ✓Firmware and driver support
- ✓Clear warranty process
- ✓Responsive after-sales help
How to connect
EMiUZEK buying notes
Frequently asked questions+
View full technical specifications+
Official product information provided by sonos+
The following product descriptions, specifications and images are provided by the manufacturer.
Bring a permanently installed passive stereo system to a patio, garden or covered outdoor area. These Sonos Architectural speakers by Sonance combine an IP66 enclosure with an 8-ohm load and are optimized for use with Sonos Amp.
Why it stands out
IP66 outdoor construction
Built for dust, water, humidity, salt spray, heat, UV exposure and freezing conditions.
Purpose-built acoustic design
A pivoting high-excursion woofer and one-inch tweeter cover 55 Hz–20 kHz.
Sonos Amp optimization
The Sonos app can apply dedicated DSP when the speakers are used with Sonos Amp.
Installation-ready pair
Grilles, FastMount brackets and terminal covers support a permanent outdoor setup.
Best for
- Patios and gardens
- Covered outdoor entertaining areas
- Permanent wired outdoor audio
- Sonos Amp systems
- Stereo outdoor zones
Not ideal for
- Portable or battery-powered use
- Direct connection to phones or Wi-Fi without an amplifier
- Sub-bass-focused systems without a subwoofer
- Installations without weather-rated speaker cable and safe routing




EMiUZEK Buying Notes
- These are passive speakers and require an amplifier; Sonos Amp is the recommended match.
- Use 16 AWG or larger outdoor-rated speaker cable and weather-safe routing.
- The 5–130 W figure is power handling, not built-in amplifier output.
FAQ
Are these wireless speakers?
No. They are passive speakers and require speaker cable connected to an amplifier.
Are they waterproof?
They are IP66 weatherproof and dustproof, but should still be installed according to the outdoor installation guide.
What amplifier should I use?
They are optimized for Sonos Amp; another suitable amplifier must support an 8-ohm load and appropriate power.
Can one Sonos Amp power multiple pairs?
Follow Sonos Amp impedance and architectural-speaker guidance; do not combine loads without checking the total impedance.
What is the frequency response?
Sonos lists 55 Hz–20 kHz at ±3 dB.
Are mounting brackets included?
Sonos lists a pair of FastMount brackets, grilles and wiring-terminal covers with the speaker pair.
Can they stay outdoors in winter?
The official operating specification covers -13°F to 149°F / -25°C to 65°C when properly installed.
Do they support Trueplay?
With Sonos Amp, Optimize Sonos Speakers applies dedicated tuning; Trueplay availability depends on the supported architectural setup.
HOW TO CONNECT
- Wire to amplifier — Run 16 AWG or larger outdoor-rated speaker cable from each speaker to a suitable amplifier.
- Mount and seal — Install the FastMount brackets, secure each speaker and fit the terminal covers.
- Optimize in Sonos — When used with Sonos Amp, select the matching Sonos Architectural speaker type in the app.
Technical Specifications
| Feature | Specification |
|---|---|
| Product type | Passive outdoor speakers, pair |
| Design partner | Sonance |
| Woofer | One high-excursion pivoting woofer per speaker |
| Tweeter | One-inch tweeter per speaker |
| Frequency response | 55 Hz–20 kHz (±3 dB) |
| Nominal impedance | 8 ohms |
| Sensitivity | 89 dB SPL (2.83 V / 1 m) |
| Power handling | 5 W minimum; 130 W maximum |
| Weather rating | IP66; Mil Spec 810 environmental conformity |
| Temperature range | -13°F to 149°F / -25°C to 65°C |
| Dimensions each | 12.96 × 7.52 × 7.83 in / 329.2 × 191 × 199 mm |
| Weight each | 8.82 lb / 4 kg |
| Colours | Black; white |
| Finish | Matte |
| Required amplifier | Suitable external amplifier; optimized for Sonos Amp |
| Recommended cable | 16 AWG or larger speaker wire |
Additional Product Content
Comparison: choose the right product
| Decision point | Sonos Outdoor by Sonance | Bowers & Wilkins AM-1 |
|---|---|---|
| System type | Passive installed pair | Passive installed outdoor speakers |
| Weather protection | IP66; Mil Spec 810 environmental conformity | Weather-resistant design |
| Nominal impedance | 8 ohms | 8 ohms |
| Best when | You want Sonos Amp optimization and IP66 specification | You prefer Bowers & Wilkins voicing |
What's in the box, manuals and downloads+
Shipping, warranty and returns+
発送元と配送費用
ご注文は中国本土の蘇州から発送します。
配送料と購入手続き時に徴収する税金は、お支払い前に表示します。配送先、重量別送料、輸入時の費用は配送・税金ポリシーをご確認ください。
EMiUZEK の商業保証
EMiUZEK は店舗の商業保証を提供します。DAC、アンプ、IEM、ドングルは1年間、ケーブルとアダプターは3か月間です。この保証は Yangzhong Jindun Digital Technology Co., Ltd. が提供します。メーカー保証がある場合は別途適用され、各ブランドの条件に従います。この商業保証は、法律上の強行的な権利や救済を制限しません。
返品
対象商品の返品は、お受け取りから30日以内にお申し込みください。不良ではない商品は、未使用または開封済みでも新品同様の状態であれば対象です。返送前にお問い合わせください。条件、例外、費用は返品ポリシーをご確認ください。