제품 판매 포인트 내장 배터리: 내장 배터리로 휴대용 전원을 공급하여 FiiO BTR15를 이동 중에도 원활하게 작동시킬 수 있습니다. LDAC/aptX Adaptive:... 더 읽어보기
$155.22 $119.00 부가세 제외
Guaranteed secure & safe checkout.
Easily pay within 30 days after you have received your package.
Read more
QCC5125 + XU316 high-performance combo | Change modes with just one button
Global parametric EQ |3.5mm+4.4mm dual outputs
0.96-inch OLED display | Dual curved glass |Independent power supply for amp
Dual DACs for fully balanced Comprehensive battery protection | Two attractive colors
Due to the BTR15's ability to work as a Bluetooth receiver
and as a USB DAC, we have implemented a PC/BT/PHONE
mode button on it. With just a click of a button, you can
quickly switch between the three different modes to match
your current scenario for listening to high-quality music.
The BTR15 features a global parametric equalizer (PEQ).
Through FllO's self-developed PEQ algorithm and user
interface, in any mode*you can choose the exact
frequencies to be adjusted along with their gain levels and
bandwidth- allowing you to fine-tune the sound to exactly
the way you want it.
PEQ notes:
*BT mode PEQ adjustments are implemented through the
QCC5125 DSP with support for LDAC and other Bluetooth formats
up to 96kHz/24bit.
*PC/PHONE mode PEQ adjustments are implemented through the
XMOS XU316 with support up to PCM 192kHz.
*PC/PHONE mode PEQ adjustments are implemented through the
XMOS chip. Enabling or disabling the PEQ, USB will restart and
disconnect.
The upgrades start from the heart of the BTR15
specifically the cores that power it. The BTR15
employs the high-performance combination of the
Qualcomm QCC5125 Bluetooth chip = XMOS 16-core
XU316 that supports stable high-res audio playback in
any mode*, allowing you more ways to immerse
yourself in the world of high-quality hi-res music.
Sampling rate notes:
*BT mode supports LDAC/aptX Adaptive/aptX LL/aptX
HD/aptX/AAC/SBC and other high-resolution Bluetooth formats
with sampling rates up to 96kHz;
*PC/PHONE modes support asynchronous decoding up to
384kHz/32bit PCM and DSD256.
The BTR15 supports MQA Full Decoder*, which
means the MQA decoding can be achieved in any
music app. This allows for high-resolution, master-
level sound quality in reasonably sized files well-
suited for your mobile device.
*Supports up to 384kHz sampling rate
With the BTR15, FllO uses hot-bent curved glass for the first
time-embedding it on both the front and the rear of the device.
Not only does this make the device easier to hold, but it also
gives the BTR15 a more attractive and 3D appearance,
Together with the aluminum alloy middle frame, they make the
BTR15 a comfortable device to handle - you won't be able to
put it down once you pick it up.
Like its bigger brother the BTR7, the BTR15 also features a large
display - a brilliant 0.96-inch OLED display. This display not only
allows displaying more information at once, it also allows for larger
display fonts- making it easier for you to see the device status and
change various settings. Moreover, it is the rarely seen device that
supports bilingual languages, Chinese and English, among similar
products.
In addition to the standard 3.5mm single-ended headphone
output, the BTR15 also comes with the widely-used 4.4mm
balanced headphone output- featuring greater contact
reliability and durability compared to the 2.5mm balanced
out. The dual outputs ensure you can use the BTR15 with:listening
more headphones,for moreremarkable
experiences.
Electricity is the mother of sound. Feiao engineers have carefully
designed an independent power supply system for DAC ES9219MQ built
in earmuffs, so that earmuffs no longer share the power supply with DAC
and the power supply is purer. In addition, the uniquely designed external
power supply has the characteristics of low noise and high current, which
increases the balanced output power of BTR15 by 40% to 340mW, and
can easily meet the needs of portable use.
You don't have to use the 4.4mm balanced output to enjoy the benefits of
increased output power. In order to improve the performance of the BTR15 in
every aspect, FllO connected the headphone outputs in parallel to also greatly
increase the output power of the 3.5mm single-ended output to better drive low-
impedance headphones, allowing you to better unlock their potential.
In order to alleviate concerns about battery health, FlO engineers
have implemented a number of software and hardware measures to
comprehensively protect the BTR15's battery
Wide directionality, stable signal
*Patent No.: ZL2021206393368
Supports app control, OTA updates
Black/Blue, two available colors
A stylish way to easily enable portablelistening
Supports UAC1.0 mode, plug and play
When used with the magnetic bundling kit MagClip, it is locked
securely without wobbling, allowing for a more comfortable portable
Hi-Fi experience!
Bluetooth chip: QCC5125 (CPU+DSP dual-core architecture)
Bluetooth version: 5.1
USB chip: XMOs XU316
DAC: ES9219MQ*2
Bluetooth codecs: AAC/SBC/aptX/aptX LL/aptX Adaptive/aptX HD/LDAC
USB DAC: Asynchronous 384kHz-32bit, DSD256
USB DAC driver-free mode: Supported
Display: 0.96-inch 96x96 resolution OLED
Headphone outs:Single-ended 3.5mm + Balanced 4.4mm
Dimensions: About 32.0mmx72.2mmx12.5mm
Weight: About 37.3g
Charging time: <2h
Battery: 550mAh high-temperature resistant lithium-ion
Battery life: About 8 hours
Output power 1:L+R≥125mW+125mW (32Ω single-ended/THD+N<1%)
Output power 2: L+R=15mW+15mW (300Ω single-ended/THD+N<1%)
Output power 3:L+R≥340mW+340mW (32Ω balanced/THD+N<1%)
Output power 4:L+R>50mW+50mW (300Ω balanced/THD+N<1%)
Frequency response: 20Hz~50kHz (-0.8dB)
Signal-to-noise ratio: ≥122dB (A-weighted)
Noise floor: Po<2μV (A-weighted); BAL<2.7μV (A-weighted)
Output impedance: PO<1Ω (320 load), BAL<1.50 (32Ω load)
THD+N: <0.0008%(1kHz/32kΩ)
①-------------------------------BTR15*1
②-------------------------------Type-C to Type-C data cable*1
③-------------------------------USB adapter*1
④-------------------------------Removable back clip*1
⑤-------------------------------Quick start guide*1
⑥-------------------------------Warranty card*1
