A compact hi-res Bluetooth receiver and digital converter for adding LDAC, USB and S/PDIF playback to an existing audio system.
$64.65 부가세 제외
A compact hi-res Bluetooth receiver and digital converter for adding LDAC, USB and S/PDIF playback to an existing audio system.
Qualcomm QCC5125 supports LDAC, aptX Adaptive, aptX HD and other widely used codecs.
Connect phones, computers, TVs and disc players without replacing the existing amplifier.
The ES9018K2M DAC and TPA1882 op-amp provide a clean 2Vrms RCA line output.
Route supported S/PDIF inputs to optical, coaxial or RCA outputs for flexible system integration.
See the active input, codec, EQ and other operating information at a glance.
FiiO Control adds remote settings, preset EQ and customizable equalization.
Keep two transmitting devices connected and switch between them more easily.
A small, easy-to-read desktop receiver designed to sit beside existing hi-fi equipment.
We help you choose the right equipment, confirm compatibility and support your system after delivery.
Confirm the selected input/output mode and set volume safely before playback.
Confirm the selected input/output mode and set volume safely before playback.
Confirm the selected input/output mode and set volume safely before playback.
Choose the FiiO BR13 when its connection options and operating modes match your system. Check headphone impedance, required cables and regional power requirements before ordering.
Can I use the FiiO BR13 with my existing audio system?
Yes, when your system has one of the listed compatible inputs. Match fixed or variable output mode to the connected equipment.
Where can I find firmware, drivers and the manual?
Use the EMiUZEK download page or the official FiiO support page linked below.
Are all maximum specifications available in every mode?
No. Sampling rate, codec, gain and output power can depend on the selected input, output, power mode and connected device.
Orders include tracked delivery where available. Plug selection, delivery estimates, import taxes, warranty handling and return eligibility are shown during purchase or in our store policies. Contact us before ordering if you need confirmation for your country.
The following product description is provided by the manufacturer or retained from the original product record.
3dB 대역폭 및 저왜곡: 3dB 대역폭과 낮은 왜곡으로 넓은 다이내믹 레인지를 즐기며 풍부하고 몰입감 넘치는 오디오 경험을 만끽하세요.
Type-C 인터페이스 및 고음질 DAC: Type-C 인터페이스와 고음질 DAC를 통해 손쉽게 연결하여 깨끗하고 선명한 오디오 출력을 제공하며, 오디오 애호가에게 적합합니다.
Br13 Fiio | 블루투스 5.1 및 LDAC/aptX 저지연: 블루투스 5.1과 LDAC/aptX 저지연 기술로 탁월한 오디오 경험을 누리세요. 차량이나 가정용 스피커 시스템에 끊김 없는 연결을 보장합니다.
컴팩트하고 휴대하기 편리한 디자인: BR13은 컴팩트한 디자인으로 휴대가 간편하여 이동 중에도 고품질 오디오를 즐길 수 있습니다.
고온 저항성: 내구성을 고려하여 설계된 FiiO BR13은 105℃의 고온을 견딜 수 있어 오래도록 사용할 수 있습니다.
| Product type | Bluetooth receiver / USB DAC / S/PDIF converter |
|---|---|
| DAC / op-amp | ES9018K2M / TPA1882 |
| Bluetooth chipset | Qualcomm QCC5125 |
| USB DAC | Up to 96kHz/24-bit, UAC 1.0 |
|---|---|
| Coaxial input | Up to 192kHz/24-bit |
| Optical input | Up to 96kHz/24-bit |
| Inputs | Bluetooth, USB-C, optical, coaxial |
|---|---|
| Outputs | Stereo RCA, optical, coaxial |
| RCA level | 2Vrms |
|---|---|
| SNR / THD+N | ≥114dB A-weighted / <0.0006% in supported wired modes |
| Bluetooth | 5.2; SBC, aptX family and LDAC |
|---|---|
| Display | 1.1-inch LCD |
| Dimensions | Approx. 98 × 96 × 26.5mm |
| Weight | Approx. 135g |
| Power | USB-C 5V/1A |
In the box: BR13, USB-to-Type-C data cable, manual and warranty card.
Visit the EMiUZEK download center for available manuals and downloads. Official product information: FiiO product page · FiiO specifications.
