Eversolo AMP-F2: 2x250W 클래스 D 스테레오 파워 앰프 | 브리지 연결 시 450W – EMiUZEK

Eversolo AMP-F2: 2x250W 클래스 D 스테레오 파워 앰프 | 브리지 연결 시 450W

Eversolo AMP-F2: 2x250W 클래스 D 스테레오 파워 앰프 | 브리지 연결 시 450W

제품 형태

다음날 배송

$799.00  $779.00 부가세 제외

    • Guaranteed secure & safe checkout.

      shop pay
    • 오늘 배송되었나요? 주문 기한: Jun 05, 2026 23:59:00 +0800
    • 50,000원 ​​이상 주문 시 무료 배송
    원하실 때 언제든 결제하세요

    상품을 받으신 후 30일 이내에 간편하게 결제하세요.
    더 읽어보기

    설명

    Eversolo AMP-F2: 고출력 클래스 D 스테레오 앰프

    Eversolo AMP-F2는 가장 까다로운 스피커 시스템에도 강력한 출력과 깨끗한 음질을 제공하도록 설계된 고성능 스테레오 파워 앰프입니다. 명성 높은 Purifi Eigentakt Class-D 모듈을 기반으로 제작된 AMP-F2는 극도로 낮은 노이즈 플로어, 초저왜곡, 그리고 전체 주파수 대역에 걸쳐 탁월한 선형성을 보장하여 강력하면서도 투명한 사운드를 선사합니다.


    주요 특징

    • 고전류 설계: 북쉘프 모니터부터 고성능 플로어 스탠딩 타워까지 다양한 스피커를 안정적이고 역동적인 출력으로 손쉽게 구동합니다.

    • 초저왜곡(<0.03% THD): 아티스트가 의도한 모든 디테일을 그대로 들어보세요. 당사의 첨단 회로는 가장 작은 속삭임부터 가장 폭발적인 클라이맥스까지 깨끗하고 투명한 신호를 보장합니다.

    • 넓은 주파수 응답 범위(10Hz - 100kHz): 미묘한 배음과 초저음까지 포착하여 전체 음역대를 재생합니다. 일반 앰프에서는 놓치는 부분까지 완벽하게 재현합니다.

    • 고급 보호 회로: 단락, 과전류, 과열 및 DC 오프셋에 대한 내장 안전 장치가 귀중한 앰프와 스피커를 보호합니다.

    • RCA 및 XLR 입력 옵션: 소비자 및 전문가용 오디오 소스 모두에 다양한 연결 옵션을 제공하여 모든 시스템에 원활하게 통합할 수 있습니다.

    • 세련되고 견고한 섀시: 내구성이 뛰어난 금속 구조는 고급스러운 외관을 제공할 뿐만 아니라 효과적으로 열을 발산하여 최적의 장기 성능을 보장합니다.


    기술 사양

    사양 세부
    출력 전력 채널당 200와트 @ 8Ω (RMS)
    채널당 350와트 @ 4Ω (RMS)
    총 고조파 왜곡(THD+N) < 0.03% (정격 출력에서 ​​1kHz)
    주파수 응답 10Hz - 100kHz (+1/-3dB)
    신호 대 잡음비(SNR) > 110dB (A-가중치)
    입력 감도 1.0V (RCA용), 2.0V (XLR용)
    입력 임피던스 47kΩ(RCA), 20kΩ(XLR)
    감쇠 계수 > 300 @ 8Ω
    입력 커넥터 스테레오 RCA 케이블 1쌍, 스테레오 XLR 케이블 1쌍
    스피커 단자 고품질 5방향 바인딩 포스트
    전원 공급 장치 독립형 전압 조절 기능을 갖춘 토로이드 변압기
    크기 (가로 x 세로 x 깊이) 17.3" x 4.7" x 15.7" (440mm x 120mm x 400mm)
    순중량 28.6파운드(13kg)

    AMP-F2를 선택해야 하는 이유는 무엇일까요?

    • 순수한 오디오 충실도: 우리는 무엇보다 음질을 최우선으로 생각하며, 중립적이고 몰입감 넘치는 청취 경험을 위해 최고급 부품을 사용합니다.

    • 뛰어난 내구성: AMP-F2는 최고 수준의 제조 기준에 따라 제작되어 향후 수년간 신뢰성과 성능을 보장합니다.

    • 다재다능한 활용성: 스테레오 음악 시스템, 홈 시어터 전면 채널의 강력한 스피커 또는 전문 오디오 시스템에 완벽하게 적합합니다.

    오디오 경험을 한 단계 끌어올리세요. 지금 바로 AMP-F2 파워 앰프를 장바구니에 담으세요.

    명세서

    • 무게: 200g
    • 용도: 실내 및 실외

    장점과 단점

    • 지속 가능한 방식으로 생산되었으며
    • 일상생활에 적합합니다.
    • 직사광선에 노출되면 변색될 수 있습니다.
    Dynamic Power
Detailed Presentation
    Vigorous Output Bridged Support
    Accurate Sound
Perfect Experience
    Powerful Power Drive
    Environmentally Friendly Low Power Consumption
    Aluminum Body
Shielding Design
    One-Touch Activation Seamless Control
back interface diagram
    Specifications

    FAQs

    What is the best use case for the Eversolo AMP-F2 power amplifier?

    The Eversolo AMP-F2 is a versatile Class D power amplifier designed for listeners who need high-quality sound in a space-saving form factor. It is the perfect aesthetic and technical match for the Eversolo DMP-A6 or DMP-A8 series. Whether you are driving high-performance bookshelf speakers in a study or integrating it into a sophisticated multi-channel home theater, the AMP-F2 provides clean, dynamic power with a neutral sound signature.

    Can the AMP-F2 be bridged to increase power for demanding speakers?

    Yes, flexibility is one of the AMP-F2’s strongest features. It can be easily switched from Stereo Mode to Bridge Mode (BTL). In Bridge Mode, the amplifier transforms into a powerful monoblock, providing significantly higher power to drive large floor-standing speakers or low-sensitivity monitors. By adding a second AMP-F2, you can create a high-end dual-mono setup for even greater channel separation and headroom.

    How does the AMP-F2 maintain its eco-friendly low power consumption?

    Eversolo has engineered the AMP-F2 with a focus on efficiency. It features an advanced low-power standby system that consumes minimal electricity when not in use. When connected via the 12V Trigger, the amplifier wakes up instantly when it receives a signal from your pre-amp or streamer and returns to its ultra-low-power state once the music stops, making it an ideal "set and forget" component for modern homes.

    Does the AMP-F2 support balanced connections for noise-free audio?

    Absolutely. To ensure the highest signal integrity, the AMP-F2 is equipped with both XLR balanced and RCA single-ended inputs. Using the XLR connections is highly recommended for audiophiles, as it effectively cancels out electromagnetic interference and noise, especially over longer cable runs. This ensures that the only thing you hear is your music, with a completely black background.

    What makes the design of the AMP-F2 unique compared to traditional amplifiers?

    The AMP-F2 breaks away from the "big and bulky" amplifier tradition. It features a precision-machined aluminum chassis that is not only robust and shielded against interference but also remarkably compact. Its dimensions are specifically designed to stack perfectly with the DMP-A6 series, creating a visually cohesive and professional-looking Hi-Fi stack that fits easily on desktops, media consoles, or narrow shelves.

    최근 본 상품

      로그인

      비밀번호를 잊으셨나요?

      아직 계정이 없으신가요?
      계정 생성