253 products

---

• Grid view
• List view

Featured Most relevant Best selling Alphabetically, A-Z Alphabetically, Z-A Price, low to high Price, high to low Date, old to new Date, new to old

Show previous products

• 

  View options

  sonos Sonos Arc/Sonos Arc ultra Wall Mount

  Create a cleaner home-theatre installation by mounting Sonos Arc or Arc Ultra directly beneath the TV. Select the correct soundbar option and follow Sonos clearance guidance so the upward- and side-firing drivers remain unobstructed.Why it stands outTwo model selectionsChoose the dedicated Arc or Arc Ultra option shown in the variants.Acoustic clearancePurpose-built placement helps preserve space around the soundbar’s directional drivers.Low-profile lookPositions the soundbar close to the wall without using a media console.Cable accessPower, HDMI and network connections remain reachable.Best for Sonos Arc or Arc Ultra Wall-mounted televisions Dolby Atmos rooms Minimal media-console setups Permanent home-theatre installations Not ideal for Sonos Beam or Ray TV mounts that need the soundbar to move with the screen Installations with obstructed soundbar ends Walls unsuitable for the required load EMiUZEK Buying Notes Select Arc Wall Mount or Arc Ultra Wall Mount; verify the exact product before ordering. Soundbar is not included. For Arc Ultra, Sonos recommends at least 4 in / 10 cm between the soundbar and TV and 1 ft / 30 cm from each end to an obstruction. FAQDoes the Arc mount fit Arc Ultra?Sonos states Arc Ultra is compatible with the Sonos Arc Wall Mount, but choose the listed model option that best matches your installation.Is the soundbar included?No. This listing is for the selected wall mount.How much clearance does Arc Ultra need?Sonos recommends at least 4 in / 10 cm from the TV and 1 ft / 30 cm from each end to walls or obstructions.Can it be installed above a TV?Sonos permits above-TV installation, though below-TV placement is recommended.Does it attach to a moving TV mount?No. A direct wall bracket remains fixed; choose a TV-mount soundbar bracket if synchronized movement is required.Can I hide the cables?Plan an approved in-wall or surface cable route before installation; do not place the power cord inside a wall unless locally permitted.Will wall mounting change the sound?Correct clearance is essential; run Trueplay after changing placement.What wall hardware should I use?Use fixings appropriate to wood stud, drywall, plaster, concrete or brick as applicable.HOW TO CONNECT Plan clearance — Centre the soundbar and mark the bracket while maintaining the required TV and side clearances. Secure bracket — Drill and install wall-specific anchors or stud fixings, then level the bracket. Attach and connect — Mount Arc or Arc Ultra, connect power and HDMI eARC/ARC, then run Sonos setup and Trueplay. Technical Specifications Feature Specification Compatible products Sonos Arc or Sonos Arc Ultra, according to selected variant Product type Fixed soundbar wall mount Soundbar included No Recommended position Below TV; above TV also supported Arc Ultra TV clearance Minimum 4 in / 10 cm Arc Ultra end clearance Minimum 1 ft / 30 cm from each end to obstruction Controls orientation Facing upward Connections retained Power, HDMI eARC/ARC, Ethernet Installation surfaces Depends on wall-specific fixings Adjustment Fixed after installation Use Indoor Additional Product Content

  Read more less

  $99.00

  View options

• 

  View options

  sonos Sonos Beam Gen 2

  Upgrade a small or medium TV room with a compact smart soundbar that supports Dolby Atmos. Beam Gen 2 connects through HDMI eARC/ARC, streams over WiFi and AirPlay 2, and expands with compatible Sonos surrounds and a Sub.Why it stands outCompact Dolby AtmosVirtualized height processing adds immersion without a large enclosure.Clear centre channelA dedicated centre tweeter and processing emphasize dialogue.Sonos ecosystem expansionAdd Sub Mini/Sub and matching surround speakers later.Smart streaming soundbarUse the Sonos app, AirPlay 2 and supported voice services for music.Best for Small to medium TV rooms Dialogue-focused viewing Dolby Atmos streaming Expandable Sonos cinema Wall or console placement Not ideal for Large rooms needing Arc Ultra scale Multiple direct HDMI source inputs Bluetooth audio playback DTS:X requirements EMiUZEK Buying Notes Beam has one HDMI eARC/ARC connection; source devices connect to the TV. Dolby Atmos depends on TV passthrough, source and content. Optical TVs require the included/appropriate Sonos optical adapter depending on package. FAQDoes it support Dolby Atmos?Yes, using psychoacoustic processing rather than upward-firing drivers.Does it support Bluetooth?No Bluetooth audio input is listed.Can I add rear speakers?Yes. Bond a compatible matching pair as surrounds.Can I add a subwoofer?Yes. Compatible Sonos Sub models can be bonded.Does it work with optical output?Yes, with the Sonos optical audio adapter, though HDMI eARC/ARC is preferred.Does it decode DTS?Sonos lists DTS Digital Surround support; DTS:X should not be assumed.Can it play music without the TV?Yes, over Sonos WiFi streaming or AirPlay 2.Is wall mounting supported?Yes, with the compatible Beam wall mount.HOW TO CONNECT HDMI eARC/ARC — Connect Beam to the TV’s HDMI eARC/ARC port. Optical adapter — Use the Sonos optical adapter when the TV lacks ARC. WiFi/Ethernet — Add Beam in the Sonos app for streaming and multiroom grouping. Technical Specifications Feature Specification Product type Compact smart soundbar Spatial audio Dolby Atmos Amplifiers Five Class-D digital Tweeter One centre tweeter Midwoofers Four elliptical midwoofers Passive radiators Three TV input HDMI eARC/ARC Optical Via adapter Wireless WiFi; Apple AirPlay 2 Bluetooth Not supported Room tuning Trueplay Voice Sonos Voice Control and Amazon Alexa where available Expansion Compatible surrounds and Sonos Sub Colours Black; white Additional Product ContentComparison: choose the right product Decision point Sonos Beam Gen 2 Sonos Arc Ultra Room scale Small to medium Medium to large Dolby Atmos approach Virtualized height processing More expansive 9.1.4 presentation Physical size Compact Wider premium soundbar Best when Space and value matter Maximum Sonos cinema immersion matters

  Read more less

  $379.05 - $699.00

  View options

• 

  View options

  sonos Sonos Beam Wall Mount

  Mount Sonos Beam close beneath your television for a clean, space-saving installation. The low-profile bracket is shaped for Beam and keeps its ports and upward-facing controls accessible.Why it stands outBeam-specific fitDesigned around the footprint and mounting points of Sonos Beam.Low-profile installationKeeps the soundbar close to the wall for a tidy TV setup.Port accessAllows connection of HDMI, power and network cables after mounting.Black or whiteChoose a finish that matches the soundbar or wall.Best for Sonos Beam and Beam Gen 2 Wall-mounted televisions Small media rooms Clean cable-managed installations Freeing console space Not ideal for Sonos Arc or Arc Ultra Mounting directly to a movable TV bracket Walls that cannot support the installation Buyers expecting a soundbar in the box EMiUZEK Buying Notes Soundbar is not included. Confirm wall construction and use suitable fixings; included hardware may not suit every wall. Allow cable bends and ventilation space before fixing the final position. FAQDoes it fit Beam Gen 2?Yes. Beam and Beam Gen 2 share the compatible wall-mount format.Is the soundbar included?No. This product is the wall mount only.Does it attach to the TV?This is a wall mount; a TV-attached moving bracket is a different product type.Can it fit Sonos Ray?No Ray compatibility is stated.Can I install it above the TV?Below-TV placement is generally preferred; follow Sonos clearance and orientation guidance.Are cables accessible?Yes. Plan the HDMI, power and optional Ethernet routes before final tightening.Which colours are available?Black and white variants are listed.Do I need a professional installer?Use one whenever wall construction, hidden wiring or load support is uncertain.HOW TO CONNECT Position — Centre the mount relative to the TV and mark level fixing points. Secure — Attach it with hardware appropriate for the wall construction. Install Beam — Fasten the soundbar, then connect power and HDMI ARC/eARC to the TV. Technical Specifications Feature Specification Compatibility Sonos Beam; Sonos Beam Gen 2 Product type Fixed soundbar wall mount Colours Black; white Soundbar included No Placement Normally below the TV Port access HDMI, power and Ethernet remain accessible Installation Wall drilling required Use Indoor Mounting style Low profile Adjustment Fixed after installation Additional Product Content

  Read more less

  $39.90

  View options

• 

  View options

  sonos Sonos Era 100 Mount/Sonos Era 300 Mount

  Free shelf space and position an Era 100 or Era 300 on the wall with a model-specific mount. The selected bracket secures the speaker while preserving access to its controls, ports and power connection.Why it stands outCorrect model supportDedicated Era 100 and Era 300 selections match each speaker’s attachment points.Flexible placementWall installation can improve surround positioning where floor stands are impractical.Control accessThe model-specific layout keeps speaker controls and connections usable.Colour optionsBlack and white variants coordinate with the speaker finish.Best for Rear-surround installations Small rooms with limited floor space Kitchen or bedroom speaker placement Keeping furniture surfaces clear Era 100 or Era 300 owners Not ideal for Ceiling installation Other Sonos models Renters unable to drill into walls Walls that cannot safely support the speaker and mount EMiUZEK Buying Notes Select Era 100 or Era 300; the brackets are not interchangeable. Speaker is sold separately. Wall type determines the correct anchors and installation method; use a qualified installer when uncertain. FAQIs the speaker included?No. The selected wall mount is supplied without the speaker.Does the Era 100 mount fit Era 300?No. Choose the model-specific variant.Can I still reach the controls?The mount is intended to preserve access to the speaker controls and connections.Can Era 300 be mounted upside down?Use the standard orientation specified by Sonos; do not invert the speaker.Can I mount into drywall?Only with anchors suitable for the wall construction and total supported weight.Is the mount suitable for outdoors?It is intended for indoor installation.Does mounting affect Trueplay?After changing placement, run Trueplay again where supported.Which colours are available?The listed variants are black and white.HOW TO CONNECT Prepare the wall — Confirm wall construction, position and safe cable access. Install the bracket — Level the wall plate and secure it with suitable fixings. Attach and set up — Fasten the correct Era speaker, connect power and retune it in the Sonos app. Technical Specifications Feature Specification Compatible speakers Sonos Era 100 or Era 300, according to selected variant Product type Model-specific speaker wall mount Variants Era 100 Mount; Era 300 Mount Colours Black; white Speaker included No Control access Maintained Port access Maintained Cable routing Speaker power-cable path supported Orientation Standard upright speaker orientation Installation Wall drilling and suitable fixings required Use Indoor Additional Product Content

  Read more less

  $29.90 - $99.90

  View options

• 

  View options

  sonos Sonos Era 100（a pair）

  Create a true left/right wireless stereo system with a matching pair of Sonos Era 100 speakers. Each compact cabinet uses two angled tweeters and one midwoofer, with WiFi, Bluetooth, AirPlay 2 and optional USB-C line-in connectivity.Why it stands outTrue stereo pairTwo speakers operate as dedicated left and right channels for a wider soundstage.Compact three-amplifier designEach Era 100 uses two angled tweeters and one midwoofer.WiFi and BluetoothSonos multiroom streaming is joined by direct Bluetooth playback.Flexible future useThe pair can serve as music speakers or compatible rear surrounds.Best for Wireless stereo music Bookshelf and desktop systems Rear surrounds Multiroom Sonos homes Bluetooth and AirPlay listening Not ideal for Dolby Atmos spatial music Large rooms needing Five-level output Direct analogue connection without adapter Portable battery use EMiUZEK Buying Notes This listing is for a pair; both speakers must be the same model for stereo pairing. USB-C line-in and Ethernet require separately sold Sonos adapters. A stereo pair cannot simultaneously operate as a separate stereo music pair and bonded surrounds. FAQIs this two speakers?Yes. The title specifies a pair; verify the selected variant before checkout.Does it play true stereo?Yes. One Era 100 becomes left and the other right.Does it support Bluetooth?Yes. Sonos lists Bluetooth 5.3.Can I connect a turntable?Yes through the separately sold Line-In Adapter, with a phono preamp where required.Can the pair be rear surrounds?Yes, with compatible Sonos home-theatre products.Does it support Dolby Atmos music?Era 100 is not the spatial-audio-focused model; choose Era 300 for Dolby Atmos music.Does Trueplay work on Android?Quick Tuning supports compatible Android and iOS devices; advanced tuning differs.Can microphones be disabled?Yes, using the hardware microphone switch.HOW TO CONNECT WiFi stereo pair — Add both speakers in Sonos, then create a stereo pair. Bluetooth 5.3 — Pair a source to the room using the rear Bluetooth button. USB-C line-in — Use a Sonos Line-In Adapter on one speaker for an analogue source. Technical Specifications Feature Specification Quantity Two Era 100 speakers Amplifiers per speaker Three Class-D Tweeters per speaker Two angled Midwoofer per speaker One WiFi 802.11a/b/g/n/ac/ax, 2.4/5 GHz Bluetooth 5.3 USB-C Line-in or Ethernet with separate adapter AirPlay Apple AirPlay 2 Trueplay Quick/advanced tuning, device dependent Voice Sonos Voice Control; Amazon Alexa where available Dimensions each 182.5 × 120 × 130.5 mm Weight each 2.2 kg Power 100–240 V, 50/60 Hz Colours Black; white Additional Product ContentComparison: choose the right product Decision point Sonos Era 100 Pair Sonos Era 300 Pair Sonos Five Pair Primary strength Compact true stereo Spatial audio and Atmos surrounds Highest conventional stereo scale Bluetooth Yes Yes No Analogue input USB-C adapter required USB-C adapter required Built-in 3.5 mm Best when You want compact flexible stereo You want spatial audio You want powerful music playback

  Read more less

  $341.05 - $679.00

  View options

• 

  View options

  sonos Sonos ERA 300

  Experience spatial music and immersive home-theatre surrounds with Sonos Era 300. Six Class-D amplifiers drive four tweeters and two woofers in a directional acoustic array designed for Dolby Atmos, while WiFi, Bluetooth and optional USB-C line-in expand source choice.Why it stands outDesigned for Dolby AtmosDirectional front, side and upward drivers create a spacious spatial-audio field.Six-driver architectureFour tweeters and two woofers balance detail, dispersion and low-frequency weight.Premium Sonos surroundsA pair can provide multi-channel rear surround sound with Arc or Beam Gen 2.Flexible connectivityUse WiFi, Bluetooth 5.3, AirPlay 2 or USB-C line-in with a separately sold adapter.Best for Spatial music Dolby Atmos rear surrounds Medium and large rooms Stereo pairs WiFi and Bluetooth listening Not ideal for Small shelves with restricted side/upward clearance Direct 3.5 mm input without adapter Battery-powered portability Buyers who only need compact conventional stereo EMiUZEK Buying Notes Dolby Atmos availability depends on service, content and source path. USB-C analogue line-in and Ethernet require separately sold Sonos adapters. For home theatre, use two matching Era 300 speakers as surrounds. FAQDoes it play Dolby Atmos music?Yes, from supported services and source paths.Can it use Bluetooth?Yes. Sonos lists Bluetooth 5.3.Does it have line-in?Yes through USB-C with a separately sold Sonos Line-In Adapter.Can one Era 300 be a surround?Sonos home-theatre surround configurations use a matching pair.Does it support AirPlay 2?Yes, from compatible Apple devices.Can I turn off microphones?Yes. A rear switch disconnects the microphone hardware.Does Trueplay work on Android?Quick Tuning supports iOS and Android; advanced tuning availability differs by device.Can it be placed inside a cabinet?Avoid blocking side and upward drivers; open placement is important.HOW TO CONNECT WiFi — Add Era 300 in the Sonos app for streaming and grouping. Bluetooth 5.3 — Press the rear Bluetooth button and pair a source. USB-C line-in — Use the Sonos Line-In Adapter for a compatible analogue source. Technical Specifications Feature Specification Amplifiers Six Class-D digital Tweeters Four directional tweeters Woofers Two high-performance woofers Spatial audio Dolby Atmos WiFi 802.11a/b/g/n/ac/ax, 2.4/5 GHz Bluetooth 5.3 USB-C Line-in or Ethernet with separately sold adapter AirPlay Apple AirPlay 2 Trueplay Quick and advanced tuning, device dependent Voice Sonos Voice Control and Amazon Alexa where available Power 100–240 V, 50/60 Hz Dimensions 160 × 260 × 185 mm Weight 4.47 kg Colours Black; white Additional Product ContentComparison: choose the right product Decision point Sonos Era 300 Apple HomePod (2nd gen) Spatial audio Dolby Atmos music and Sonos Atmos surrounds Apple Music Spatial Audio Bluetooth playback Yes No conventional Bluetooth playback Home-theatre role Pairs as surrounds with compatible Sonos soundbars Pairs with Apple TV 4K in Apple ecosystem Best when You want cross-platform Sonos expansion You use an Apple-focused home

  Read more less

  $360.05 - $1,299.00

  View options

• 

  View options

  sonos Sonos Era 300 Stand / Era 100 Stand

  Place an Era 100 or Era 300 at a stable listening height without using furniture. Each stand is shaped for its selected speaker, routes the power cable neatly and keeps controls and connections accessible.Why it stands outModel-specific fitSeparate Era 100 and Era 300 selections match the mounting points of the chosen speaker.Cleaner cable pathIntegrated routing keeps the speaker power cable close to the stand.Purpose-built placementMoves the speaker away from shelves and furniture for more flexible positioning.Matching finishBlack and white selections coordinate with the corresponding Sonos speaker.Best for Rear-surround placement Stereo-pair listening Rooms without suitable shelves Clean cable-managed installations Era 100 or Era 300 owners Not ideal for Other Sonos speaker models Buyers needing adjustable stand height Wall-mounted installations Use on an unstable or sharply sloped floor EMiUZEK Buying Notes Select Era 100 Stand or Era 300 Stand; the top attachment is not universal. Speaker is not included. Choose the colour and confirm the power cable can reach the intended outlet. FAQIs the speaker included?No. This listing is for the selected stand only.Does one stand fit both models?Choose the correct model-specific option; Era 100 and Era 300 use different speaker attachments.Can the power cable be hidden?The stand provides cable routing to reduce visible cable clutter, but the cable still exits near the base.Is the height adjustable?No adjustable-height mechanism is stated for this model.Can I use it for surround speakers?Yes. A stand is useful for positioning an Era speaker as a rear surround at a consistent height.Can it be used on carpet?Use only on a stable surface and follow the included installation hardware guidance.Which colours are available?The store variants list black and white.Will it fit Sonos One or Five?No compatibility with Sonos One or Five is stated.HOW TO CONNECT Attach the speaker — Secure the selected Era 100 or Era 300 to its matching stand hardware. Route the power cable — Run the Sonos power cable through the stand’s cable-management path. Place and power — Set the base on a stable surface, connect power and complete speaker setup in the Sonos app. Technical Specifications Feature Specification Compatible speakers Sonos Era 100 or Sonos Era 300, according to selected variant Product type Fixed-height speaker floor stand Variants Era 100 Stand; Era 300 Stand Colours Black; white Cable management Integrated power-cable routing Speaker orientation Standard upright orientation Speaker included No Installation Assembly required Use Indoor Era 100 official stand reference height 35.83 in / 910 mm Era 300 official stand reference height 37.64 in / 956 mm Additional Product Content

  Read more less

  $179.00 - $265.05

  View options

• 

  View options

  sonos Sonos Five

  Fill a larger room with full-range wireless sound from Sonos Five. Six Class-D amplifiers drive three tweeters and three midwoofers, while 3.5 mm line-in connects a preamplified turntable, CD player or computer to the Sonos multiroom system.Why it stands outSix-driver acoustic systemThree tweeters and three midwoofers deliver wide stereo detail and substantial bass.Useful analogue line-inBring a turntable with phono stage, CD player or computer into Sonos.Orientation-aware soundHorizontal placement creates stereo from one unit; vertical placement supports focused mono or a stereo pair.Trueplay room tuningSupported iOS devices optimize response for the final placement.Best for Large-room music Turntables with phono preamp Stereo pairs Sonos multiroom homes Listeners prioritizing bass without a subwoofer Not ideal for Bluetooth playback Voice-assistant control built into the speaker Dolby Atmos spatial music Battery-powered portable use EMiUZEK Buying Notes Five does not list Bluetooth audio or built-in voice microphones. A turntable requires a built-in or external phono preamp. Stereo pairing requires two matching Sonos Five speakers. FAQDoes Five support Bluetooth?No Bluetooth audio input is listed; use WiFi, AirPlay 2, Ethernet or line-in.Can I connect a turntable?Yes, through 3.5 mm line-in when the turntable has a phono preamp.Does one Five play stereo?Horizontally, one Five separates left and right channels; two vertically placed Fives create a wider dedicated stereo pair.Does it support Trueplay?Yes, with a supported iOS device.Can it be used as a surround?A pair of Five speakers can be used as surrounds with supported Sonos home-theatre products.Does it have voice control?Five does not include the far-field voice microphones found on some Sonos smart speakers.Can I hardwire it?Yes. It has a 10/100 Ethernet port.Is it humidity resistant?Yes, for indoor high-humidity spaces; it is not weatherproof.HOW TO CONNECT WiFi or Ethernet — Add Five in the Sonos app over WiFi or connect the 10/100 Ethernet port. Apple AirPlay 2 — Select Five from the AirPlay menu on a compatible Apple device. 3.5 mm line-in — Connect a line-level source and configure autoplay or source level in the Sonos app. Technical Specifications Feature Specification Amplifiers Six Class-D digital Tweeters Three Midwoofers Three Cabinet Sealed architecture Line input 3.5 mm analogue WiFi 802.11a/b/g/n, 2.4 or 5 GHz Ethernet 10/100 AirPlay Apple AirPlay 2 Bluetooth Not supported Trueplay Supported iOS device required Dimensions 203 × 364 × 154 mm Weight 6.3 kg Power 100–240 V, 50/60 Hz CPU Quad-core 1.3 GHz Colours Black; white Orientation Horizontal stereo; vertical mono/stereo-pair use Additional Product ContentComparison: choose the right product Decision point Sonos Five Sonos Era 300 Primary strength Powerful conventional stereo and analogue line-in Dolby Atmos spatial audio Bluetooth No Bluetooth 5.3 Analogue input Built-in 3.5 mm USB-C adapter required Best when You prioritize full-range stereo and turntable/CD input You prioritize spatial music and Atmos surrounds

  Read more less

  $569.00 - $1,138.10

  View options

• 

  View options

  sonos Sonos In-Ceiling Speaker (Pair)

  Add room-filling audio without visible cabinets using Sonos Architectural in-ceiling speakers by Sonance. Choose the 6-inch or 8-inch pair, connect them to a suitable amplifier and use Sonos Amp optimization for dedicated DSP tuning.Why it stands outTwo size choicesSelect 6-inch for compact installation or 8-inch for greater acoustic scale.Discreet overhead audioPaintable round grilles blend into the ceiling.Sonos Amp optimizationThe Sonos app applies a supported architectural-speaker profile.Designed as a pairMatched speakers support stereo or evenly distributed room coverage.Best for Whole-home audio Kitchens and living areas Minimal-visibility installations Sonos Amp zones New-build or renovation projects Not ideal for Ceilings without adequate clearance Buyers wanting portable speakers Projects without amplifier or installed cable Outdoor exposure EMiUZEK Buying Notes Choose 6-inch or 8-inch before ordering; cutout and depth requirements differ. These are passive speakers and require an amplifier. Verify joists, pipes, wiring, insulation and local code before cutting the ceiling. FAQWhat is the difference between 6-inch and 8-inch?The 8-inch option uses a larger acoustic format and requires a larger cutout; choose according to room size and installation space.Are they sold as a pair?The product title and variants specify a pair.Are they wireless?No. They require speaker cable and an amplifier.Can I paint the grilles?Yes, following the official architectural-speaker instructions.Do they work with Sonos Amp?Yes. They are designed for Sonos Amp optimization.Can I use them as Dolby Atmos height speakers?They can be installed as passive height channels only when connected to a compatible home-theatre amplifier; Sonos Amp routing has its own supported configurations.Is installation hardware included?Use the official box list and installation guide; do not assume cable or tools are included.Do I need an installer?Professional installation is recommended.HOW TO CONNECT Plan cutouts — Choose 6-inch or 8-inch and confirm ceiling depth and obstruction-free locations. Run speaker wire — Connect approved in-ceiling cable from each speaker position to the amplifier. Install and optimize — Secure both speakers, fit grilles and select the matching Sonos profile when using Amp. Technical Specifications Feature Specification Product type Passive architectural in-ceiling speakers, pair Variants 6-inch pair; 8-inch pair Design partner Sonance Installation Flush in-ceiling Grilles Paintable round grilles Amplifier required Yes Recommended amplifier Sonos Amp Speaker cable In-ceiling-rated cable required Wireless connectivity None built in Use Indoor Sonos tuning Optimize Sonos Speakers with compatible Sonos Amp setup Additional Product ContentComparison: choose the right product Decision point Sonos 6-inch In-Ceiling Sonos 8-inch In-Ceiling B&W CCM Series Opening and cavity Smaller Larger Model dependent Output potential Compact/medium zones Larger rooms and stronger bass potential Model dependent Sonos Amp profile Supported Supported No Sonos-specific profile Best when Installation space is limited You want greater acoustic scale You prefer another architectural voicing

  Read more less

  $513.95 - $698.25

  View options

• 

  View options

  sonos Sonos In-Wall Speaker

  Build a discreet wired audio system with Sonos Architectural in-wall speakers by Sonance. Their paintable grilles sit nearly flush with the wall, while Sonos Amp can recognize and optimize the supported architectural speaker profile.Why it stands outDiscreet installationPaintable low-profile grilles integrate into finished walls.Sonos Amp optimizationSupported Sonos Architectural tuning applies custom DSP through Sonos Amp.Home-theatre readyIn-wall placement suits front, surround or distributed-audio roles.Passive-system flexibilityStandard speaker wiring allows planned whole-home installations.Best for Custom home installations Front or surround channels Whole-home audio zones Rooms where floor speakers are impractical Sonos Amp systems Not ideal for Temporary or rental installations Wireless speaker buyers Walls without adequate cavity depth Projects without suitable amplifier and cable EMiUZEK Buying Notes These are passive speakers; an amplifier and in-wall-rated speaker cable are required. Confirm whether the listing quantity is a pair before installation planning. Cutout dimensions, cavity clearance and local fire-code requirements must be checked before cutting. FAQAre these wireless?No. They require speaker cable and an external amplifier.Are they optimized for Sonos Amp?Yes. Supported Sonos Architectural speakers can be selected in the Sonos app for custom tuning.Can the grille be painted?The architectural grille is designed for discreet finishing; follow the official painting instructions.Can they be used for home theatre?Yes, when correctly positioned and driven by a suitable amplifier.Do they need a back box?Installation requirements depend on the wall cavity and local building rules; follow the Sonance guide.Can one Amp power more than one pair?Only within Sonos Amp’s supported impedance and architectural-speaker limits.Is speaker wire included?Do not assume it is included; plan suitable in-wall-rated cable.Should I hire an installer?Professional installation is recommended for wall cutting, cable routing and code compliance.HOW TO CONNECT Prepare wall cavity — Confirm stud spacing, depth, cable path and cutout position. Wire to amplifier — Run approved in-wall speaker cable with correct polarity. Install and tune — Secure the speaker, fit the grille and select the matching profile in Sonos Amp. Technical Specifications Feature Specification Product type Passive architectural in-wall speaker Design partner Sonance Installation Flush in-wall Grille Paintable low-profile grille Amplifier required Yes Recommended amplifier Sonos Amp Speaker wiring In-wall-rated cable required Wireless connectivity None built in Sonos tuning Optimize Sonos Speakers with compatible Sonos Amp setup Use Indoor Application Stereo, home theatre or distributed audio Additional Product ContentComparison: choose the right product Decision point Sonos In-Wall by Sonance Bowers & Wilkins CWM Series Sonos Amp optimization Dedicated supported profile No Sonos-specific profile Installation role Discreet wall-level stereo or theatre Discreet wall-level stereo or theatre Grille Paintable low-profile Model-dependent paintable grille Best when You prioritize Sonos integration You prioritize a specific B&W driver design

  Read more less

  $500.65

  View options

• 

  View options

  sonos Sonos Outdoor Speaker(Pair)

  Bring a permanently installed passive stereo system to a patio, garden or covered outdoor area. These Sonos Architectural speakers by Sonance combine an IP66 enclosure with an 8-ohm load and are optimized for use with Sonos Amp.Why it stands outIP66 outdoor constructionBuilt for dust, water, humidity, salt spray, heat, UV exposure and freezing conditions.Purpose-built acoustic designA pivoting high-excursion woofer and one-inch tweeter cover 55 Hz–20 kHz.Sonos Amp optimizationThe Sonos app can apply dedicated DSP when the speakers are used with Sonos Amp.Installation-ready pairGrilles, FastMount brackets and terminal covers support a permanent outdoor setup.Best for Patios and gardens Covered outdoor entertaining areas Permanent wired outdoor audio Sonos Amp systems Stereo outdoor zones Not ideal for Portable or battery-powered use Direct connection to phones or Wi-Fi without an amplifier Sub-bass-focused systems without a subwoofer Installations without weather-rated speaker cable and safe routing EMiUZEK Buying Notes These are passive speakers and require an amplifier; Sonos Amp is the recommended match. Use 16 AWG or larger outdoor-rated speaker cable and weather-safe routing. The 5–130 W figure is power handling, not built-in amplifier output. FAQAre these wireless speakers?No. They are passive speakers and require speaker cable connected to an amplifier.Are they waterproof?They are IP66 weatherproof and dustproof, but should still be installed according to the outdoor installation guide.What amplifier should I use?They are optimized for Sonos Amp; another suitable amplifier must support an 8-ohm load and appropriate power.Can one Sonos Amp power multiple pairs?Follow Sonos Amp impedance and architectural-speaker guidance; do not combine loads without checking the total impedance.What is the frequency response?Sonos lists 55 Hz–20 kHz at ±3 dB.Are mounting brackets included?Sonos lists a pair of FastMount brackets, grilles and wiring-terminal covers with the speaker pair.Can they stay outdoors in winter?The official operating specification covers -13°F to 149°F / -25°C to 65°C when properly installed.Do they support Trueplay?With Sonos Amp, Optimize Sonos Speakers applies dedicated tuning; Trueplay availability depends on the supported architectural setup.HOW TO CONNECT Wire to amplifier — Run 16 AWG or larger outdoor-rated speaker cable from each speaker to a suitable amplifier. Mount and seal — Install the FastMount brackets, secure each speaker and fit the terminal covers. Optimize in Sonos — When used with Sonos Amp, select the matching Sonos Architectural speaker type in the app. Technical Specifications Feature Specification Product type Passive outdoor speakers, pair Design partner Sonance Woofer One high-excursion pivoting woofer per speaker Tweeter One-inch tweeter per speaker Frequency response 55 Hz–20 kHz (±3 dB) Nominal impedance 8 ohms Sensitivity 89 dB SPL (2.83 V / 1 m) Power handling 5 W minimum; 130 W maximum Weather rating IP66; Mil Spec 810 environmental conformity Temperature range -13°F to 149°F / -25°C to 65°C Dimensions each 12.96 × 7.52 × 7.83 in / 329.2 × 191 × 199 mm Weight each 8.82 lb / 4 kg Colours Black; white Finish Matte Required amplifier Suitable external amplifier; optimized for Sonos Amp Recommended cable 16 AWG or larger speaker wire Additional Product ContentComparison: choose the right product Decision point Sonos Outdoor by Sonance Bowers & Wilkins AM-1 System type Passive installed pair Passive installed outdoor speakers Weather protection IP66; Mil Spec 810 environmental conformity Weather-resistant design Nominal impedance 8 ohms 8 ohms Best when You want Sonos Amp optimization and IP66 specification You prefer Bowers & Wilkins voicing

  Read more less

  $607.05 - $639.00

  View options

• Sale -11%

  View options

  sonos Sonos Port

  Sonos Port is a wireless music streamer designed to connect traditional audio equipment to the Sonos ecosystem. With analog and digital outputs, AirPlay 2 support, and seamless multi-room control, Sonos Port allows existing amplifiers, receivers, and powered speakers to become part of a modern connected audio system. Why it stands out Bring Traditional Audio Into Sonos Sonos Port upgrades existing amplifiers and speakers with wireless streaming and multi-room audio capabilities. Flexible HiFi Connectivity With RCA analog output, digital output, and line-in support, Port integrates easily with a wide range of audio equipment. Seamless Multi-Room Control Enjoy synchronized music throughout your home using the Sonos ecosystem and intuitive app control. Designed for Existing HiFi Systems Port provides an easy way to modernize a traditional stereo setup without replacing your existing amplifier or speakers. Best for Existing HiFi amplifier systems Sonos multi-room audio expansion Active speaker systems Vinyl systems connected to Sonos Users upgrading traditional stereo equipment Not ideal for Users needing a built-in amplifier Users looking for a Bluetooth-only receiver Users wanting a standalone high-end DAC Users without existing audio equipment EMiUZEK Buying Notes Sonos Port is a streaming device, not a power amplifier. It requires an external amplifier, receiver, or powered speakers. It does not directly drive passive speakers. For vinyl playback, connect a turntable through a phono preamp or compatible amplifier with line output. A wired Ethernet connection is recommended for stable multi-room performance. FAQ Does Sonos Port have a built-in amplifier? No. Sonos Port is a streamer and requires an external amplifier or powered speakers. Does Sonos Port support AirPlay 2? Yes. It supports AirPlay 2 for compatible Apple devices. Can Sonos Port connect to a traditional amplifier? Yes. Connect Port to an amplifier or receiver through analog RCA or digital output to add Sonos streaming capability. Can Sonos Port connect to a turntable? Yes. A turntable can be connected through the Line-In connection of a compatible Sonos system. Does Sonos Port support Bluetooth? No. Sonos Port focuses on WiFi-based streaming rather than Bluetooth playback. Can Sonos Port be used with active speakers? Yes. The analog output can connect directly to compatible powered speakers. Does Sonos Port support multi-room audio? Yes. It can be integrated into a Sonos multi-room system with other Sonos products. HOW TO CONNECT HiFi Amplifier Setup Source icon: Streaming ServiceSource: Sonos App / Music ServicesConnection: WiFi / EthernetOutput connection: RCA / Digital OutputTarget icon: AmplifierOutput: Wireless HiFi System Note: Add Sonos streaming features to traditional amplifiers. Active Speaker Setup Source icon: Sonos SystemSource: Music StreamingConnection: NetworkOutput connection: RCATarget icon: Powered SpeakersOutput: Wireless Speaker System Note: Connect directly to active speakers. Vinyl Setup Source icon: TurntableSource: Analog AudioConnection: Line-InTarget icon: Sonos SystemOutput: Multi-Room Vinyl Playback Note: Share vinyl playback across Sonos rooms. Technical Specifications Audio Product Type: Wireless Music Streamer Audio Output: RCA Analog / Coaxial Digital Audio Input: RCA Line-In Digital Output: Coaxial DAC: Built-in Sonos Digital Audio Processing Connectivity WiFi: Supported Ethernet: Supported AirPlay 2: Supported Sonos Multi-Room: Supported 12V Trigger Output: Supported Control Control Method: Sonos App Voice Control: Supported through compatible voice assistants General Power: AC Power Application: HiFi System Upgrade / Multi-Room Audio Recommended System Setup Setup Connection Traditional HiFi Sonos Port → Amplifier → Speakers Active Speakers Sonos Port → Powered Speakers Vinyl System Turntable → Sonos Port → Sonos Rooms What's in the box Sonos Port ×1 Power Cable ×1 RCA Cable ×1 Ethernet Cable ×1 User Manual ×1 Download Center Access product manuals, technical documents, and support resources. https://emiuzek.com/pages/download Additional Product Content Sonos Port vs Sonos Amp Feature Sonos Port Sonos Amp Product Type Music Streamer Streaming Amplifier Built-in Amplifier No Yes Passive Speaker Support No Yes RCA Output Yes Yes Sonos Multi-Room Yes Yes Best Focus Upgrade existing HiFi systems Power passive speakers

  Read more less

  $449.00  $399.00

  View options

• 

  View options

  sonos Sonos Ray

  Improve television dialogue and everyday sound in a compact room with Sonos Ray. Its optical input suits straightforward TV setups, while WiFi, AirPlay 2 and the Sonos app add music streaming and multiroom playback.Why it stands outCompact TV upgradeA small cabinet fits bedrooms, offices and secondary TVs.Optical simplicityOne optical cable handles compatible TV audio without HDMI setup.Dialogue-focused designCentre-oriented acoustic processing improves speech clarity.Expandable Sonos systemAdd compatible surrounds and a Sonos Sub later.Best for Bedrooms and small rooms TVs with optical output Dialogue improvement Sonos multiroom music Buyers not needing Dolby Atmos Not ideal for Dolby Atmos content HDMI ARC/eARC control Bluetooth audio Large-room cinema output EMiUZEK Buying Notes Ray requires an optical TV output; it has no HDMI port. TV remote control may require IR setup in the Sonos app. For Atmos or HDMI eARC, choose Beam Gen 2 or Arc Ultra. FAQDoes Ray support HDMI ARC?No. It connects to the TV by optical audio.Does it support Dolby Atmos?No.Can my TV remote control volume?Ray can learn compatible infrared remote commands.Does it have Bluetooth?No Bluetooth audio input is listed.Can I add surrounds?Yes, using a compatible matching pair of Sonos speakers.Can I add a subwoofer?Yes, with a compatible Sonos Sub model.Can it stream music?Yes, over WiFi through Sonos services and AirPlay 2.Does Trueplay work?Yes, with a supported iOS device.HOW TO CONNECT Optical TV — Connect the included/compatible optical cable from TV to Ray. WiFi — Add Ray in the Sonos app for streaming and system control. Apple AirPlay 2 — Select Ray from a compatible Apple device’s AirPlay menu. Technical Specifications Feature Specification Product type Compact soundbar TV input Optical digital audio HDMI Not supported Dolby Atmos Not supported Wireless WiFi; Apple AirPlay 2 Bluetooth Not supported Room tuning Trueplay with supported iOS device Remote control IR remote learning Expansion Compatible surrounds and Sonos Sub Ethernet 10/100 Colours Black; white Use Indoor Additional Product ContentComparison: choose the right product Decision point Sonos Ray Sonos Beam Gen 2 TV connection Optical HDMI eARC/ARC Dolby Atmos No Yes Room scale Small Small to medium Best when You need simple optical TV audio You want Atmos and HDMI control

  Read more less

  $198.00 - $208.05

  View options

• 

  View options

  sonos Sonos Sub 4

  Add deeper, cleaner bass to a compatible Sonos soundbar or speaker system. Sub 4 uses dual inward-facing 5 × 8-inch woofers in a ported enclosure, reaches as low as 25 Hz and connects over WiFi for flexible upright or horizontal placement.Why it stands outForce-cancelling woofersDual inward-facing drivers reduce cabinet vibration and audible distortion.Bass to 25 HzThe ported cabinet extends low-frequency impact for films and music.Trueplay integrationRoom tuning balances the subwoofer with compatible Sonos speakers.Flexible placementUse it upright or lay it flat where ventilation and clearance allow.Best for Arc Ultra, Arc, Beam or Ray systems Larger rooms Film and game impact Music systems with Five or Era speakers Dual-Sub Arc Ultra systems Not ideal for Non-Sonos systems Small rooms better suited to Sub Mini Wired RCA/LFE connections Buyers needing a battery-powered subwoofer EMiUZEK Buying Notes Sub 4 requires a compatible amplified non-portable Sonos product. It has no conventional RCA/LFE input. Dual-subwoofer support depends on the bonded Sonos home-theatre product and compatible Sub generations. FAQHow low does it play?Sonos specifies frequency response as low as 25 Hz.Is it wireless?Audio links to the Sonos system over WiFi; the subwoofer still requires mains power.Can I connect it to an AV receiver?No conventional LFE input is provided.Can it lie flat?Yes. Sonos supports upright or horizontal orientation.Which products are compatible?Sonos lists products including Arc Ultra, Arc, Beam, Ray, Five, Era 300 and Era 100.Can I use two?Arc Ultra supports compatible dual-Sub configurations; verify the exact generations before purchase.What changed from earlier Sub models?Sub 4 adds updated electronics, more memory, a faster processor, WiFi 6 and lower idle power use.Does Trueplay tune the bass?Yes, as part of a supported Sonos room setup.HOW TO CONNECT Power — Place Sub 4 upright or flat and connect the power cable. Add in Sonos app — Choose Add Product and bond Sub 4 to a compatible room. Tune and adjust — Run Trueplay where supported, then adjust Sub Audio level and phase in the app. Technical Specifications Feature Specification Amplifiers Dual Class-D digital Woofers Dual 5 × 8 in elliptical, inward-facing Architecture Ported, force-cancelling Frequency response As low as 25 Hz Connection WiFi; WiFi 6 radio Orientation Upright or horizontal Dimensions 389 × 402 × 158 mm Weight 11.79 kg Finish Black or white matte Trueplay Supported with compatible system Wired audio input None Power requirement Nearby mains outlet App Current Sonos app required Additional Product ContentComparison: choose the right product Decision point Sonos Sub 4 Sonos Sub Mini Low-frequency extension As low as 25 Hz Not specified by Sonos on the compared product page Drivers Dual 5 × 8-inch force-cancelling woofers Dual 6-inch force-cancelling woofers Placement Upright or horizontal Compact upright cylinder Best room Medium to large Small to medium

  Read more less

  $721.05 - $899.00

  View options

• 

  View options

  sonos Sonos Sub Mini

  Add controlled low bass to a compact Sonos music or home-theatre system without the size of Sub 4. Sub Mini uses dual inward-facing six-inch woofers in a sealed cylindrical cabinet to reduce vibration and connects wirelessly to a compatible Sonos product.Why it stands outCompact force-cancelling designDual inward-facing woofers minimize cabinet buzz and rattle.Sealed cabinetPrioritizes controlled, articulate bass in smaller rooms.Wireless Sonos bondingNo audio cable is required between Sub Mini and the main Sonos product.Trueplay integrationSupported room tuning balances bass with the bonded system.Best for Beam or Ray systems Era 100 and One music systems Small to medium rooms Apartments Listeners wanting discreet bass Not ideal for Very large rooms Maximum cinema output Non-Sonos systems Conventional RCA/LFE connection EMiUZEK Buying Notes Sub Mini requires a compatible amplified Sonos product and mains power. It does not provide RCA/LFE input. For larger rooms or Arc Ultra systems, compare Sub 4. FAQIs it wireless?Audio is wireless over the Sonos network; mains power is still required.Which speakers work with it?It bonds with compatible amplified Sonos products; verify the current compatibility list.Can it connect to an AV receiver?No conventional LFE input is provided.How many woofers does it use?Two inward-facing six-inch woofers.Can it lie on its side?Use Sub Mini in its intended upright orientation.Does it support Trueplay?Yes, as part of a supported Sonos room.Is it enough for Arc Ultra?Sub Mini can suit moderate listening, but Sub 4 is the stronger match for large rooms and maximum cinema output.Can I use two Sub Minis in one room?Dual-sub configurations are limited by Sonos product and subwoofer model; do not assume two Sub Minis are supported.HOW TO CONNECT Power — Place Sub Mini upright and connect mains power. Add in Sonos app — Bond it to a compatible Sonos room. Tune — Run Trueplay where supported and adjust Sub Audio settings. Technical Specifications Feature Specification Amplifiers Dual Class-D digital Woofers Dual 6 in, inward-facing Architecture Sealed, force-cancelling cylindrical cabinet Connection Wireless Sonos network Wired audio input None Orientation Upright Trueplay Supported with compatible system Dimensions 305 × 230 × 230 mm Weight 6.35 kg Colours Black; white Power Mains required Use Indoor Additional Product ContentComparison: choose the right product Decision point Sonos Sub Mini Sonos Sub 4 Cabinet Sealed cylindrical Ported rectangular Drivers Dual 6-inch force-cancelling Dual 5 × 8-inch force-cancelling Placement Upright Upright or horizontal Best room Small to medium Medium to large

  Read more less

  $379.05

  View options

• 

  View options

  TOPPING TOPPING D90 III Discrete

  TOPPING D90 III Discrete – Flagship Desktop HiFi DAC with Fully Discrete 1Bit Architecture The D90 III Discrete represents TOPPING's latest innovation in premium audio decoding. This compact yet powerful desktop DAC features a groundbreaking fully discrete 1Bit DAC architecture developed in-house, delivering native DSD playback with enhanced naturalness and analog warmth compared to traditional chip-based solutions. Key Features: All To DSD Processing: All digital signals are converted to DSD format for improved resolution and musicality10-Parametric EQ: Precise audio tuning with high accuracy PEQ adjustmentsMulti-Format Support: MQA Full Decode, DSD512, PCM up to 768kHzVersatile Connectivity: USB, IIS, Coaxial, Optical inputs with Bluetooth 5.0Dual Output Modes: RCA (2.5V) and XLR (5V) selectable outputsCompact Design: 22cm × 16cm × 4.5cm footprint perfect for space-constrained setups Technical Highlights: PSRM Power Supply: Advanced power regulation for cleaner audio performanceR-2R Relay Volume Control: Provides precise analog gain adjustmentNFCA Discrete Amplification: Ensures low-distortion signal pathCross Platform Compatibility: Works seamlessly with Windows/macOS/iOS/Android Audio Performance: Natural Soundstage: Open and airy presentation with excellent depthControlled Bass Response: Tight and articulate low-endSmooth Highs: Refined treble without harshnessNeutral Character: Faithful reproduction of source material Ideal for: High-end headphone setupsDesktop audio systemsProfessional studio monitoringHiFi enthusiasts seeking reference-grade sound The D90 III Discrete combines engineering excellence with user-friendly features, making it a compelling choice for discerning audio professionals and enthusiasts alike. Its innovative design philosophy bridges the gap between technical precision and musical expressiveness.

  Read more less

  $949.00

  View options

• 

  View options

  Xangsane Xangsane 3300 6N OCC USB-A Audio Cable – A-to-A/A-to-B

  Xangsane 3300 USB 6N Single-Crystal Copper USB Audio Cable — premium audiophile-grade USB cable featuring 6N single-crystal copper conductors with USB A to A connectors, designed for high-fidelity digital audio data transmission between computers, OTG devices, decoders, DACs, and audio equipment. Round connector shape, outer diameter 8.5mm. Key Features: 6N single-crystal copper conductors for superior digital audio signal transmission with minimal loss and reduced distortion USB A to A connector configuration for universal compatibility with computers, OTG devices, decoders, and multimedia systems Round connector shape with 8.5mm outer diameter for sturdy, durable build Ideal for connecting computers, OTG devices, decoders, DACs, amplifiers, and HiFi audio systems Available in 5 lengths: 0.5m, 0.75m, 1m, 1.5m, 2m Specifications: Conductor: 6N single-crystal copper Connector: USB A (male) to USB A (male) Outer diameter: 8.5mm Connector shape: Round Application: HiFi USB audio cable, OTG decoding cable, computer decoder, DAC, data cable Lengths: 0.5m, 0.75m, 1m, 1.5m, 2m What's in the box: 1× Xangsane 3300 USB 6N Single-Crystal Copper USB Audio Cable A-A (selected length)

  Read more less

  $47.99 - $116.99

  View options

• 

  View options

  Xangsane Xangsane 5500 6N OCC RCA Interconnect – Pair

  Xangsane 5500 RCA Cable — premium audiophile-grade RCA interconnect cable featuring 6N frozen single crystal copper conductors with lotus plug (RCA) connectors, designed for high-fidelity audio signal transmission between power amplifiers, speakers, decoders, and audio systems. One pair (2 cables) for stereo left/right channel configuration. Outer diameter 11.5mm for robust construction. Key Features: 6N frozen single crystal copper conductors for superior audio signal transmission with minimal loss and enhanced audio clarity Lotus plug (RCA) connectors for excellent conductivity and secure connection One pair (2 cables) for stereo left/right channel configuration Robust construction with 11.5mm outer diameter for excellent durability and wear resistance Ideal for connecting power amplifiers, speakers, decoders, and HiFi audio systems CE certified for safety and compliance Available in 5 lengths: 1m, 1.5m, 2m, 3m, 5m Specifications: Conductor: 6N frozen single crystal copper Connector: Lotus plug (RCA, male to male) Configuration: One pair (2 cables, stereo) Outer diameter: 11.5mm Certification: CE Application: HiFi RCA signal cable, power amplifier, speaker, decoder Lengths: 1m, 1.5m, 2m, 3m, 5m What's in the box: 1 pair (2×) Xangsane 5500 RCA Cable 6N Frozen Single Crystal Copper (selected length)

  Read more less

  $298.99 - $888.99

  View options

• 

  View options

  Xangsane Xangsane 5N OCC 75Ω Digital Coaxial Audio Cable

  Xangsane 5N OCC 75Ω Digital Coaxial Audio Cable — premium audiophile-grade coaxial cable with 5N OCC (Ohno Continuous Casting) conductors and precise 75Ω impedance, designed for digital audio transmission between SPDIF devices, DACs, amplifiers, and AV equipment. Key Features: 5N OCC pure copper conductor for superior digital signal transmission Precise 75Ω impedance matching for coaxial digital audio Braid shielding minimizes electromagnetic and radio frequency interference Male RCA connectors on both ends for secure, stable connection Ideal for SPDIF, DAC, amplifier, TV, DVD player, and subwoofer connections Available in 9 lengths: 0.5m, 0.75m, 1m, 1.5m, 2m, 2.5m, 3m, 5m, 8m Specifications: Conductor: 5N OCC pure copper Impedance: 75Ω Connectors: Male RCA to Male RCA Shielding: Braid shielding Application: Digital coaxial audio, SPDIF, subwoofer, amplifier What's in the box: 1× Xangsane 5N OCC 75Ω Digital Coaxial Audio Cable (RCA)

  Read more less

  $11.99 - $106.99

  View options

• 

  View options

  Xangsane Xangsane 5N OCC Speaker Cable Pair – Banana/Spade Terminations

  One Pair 5N OCC HiFi Speaker Cable — premium audiophile-grade speaker cable featuring 5N OCC (Ohno Continuous Casting) copper conductors with banana plug to Y plug connector configuration, designed for high-fidelity audio connection between amplifiers, tube amplifiers (gallbladder), and speaker systems. One pair (2 cables) for stereo left/right channel configuration. Key Features: 5N OCC copper conductors for superior audio signal transmission with minimal loss and distortion Banana plug to Y plug connector configuration for versatile compatibility with amplifiers and speakers One pair (2 cables) for stereo left/right channel configuration Ideal for connecting power amplifiers, tube amplifiers (gallbladder), and HiFi speaker systems Foil shielding for reduced electromagnetic interference Available in 6 lengths: 1.5m, 2m, 2.5m, 3m, 3.5m, 5m Specifications: Conductor: 5N OCC copper Connector: Banana plug (amplifier end) to Y plug (speaker end) Configuration: One pair (2 cables, stereo) Shielding: Foil shielding Application: HiFi speaker cable, power amplifier, tube amplifier (gallbladder), speaker system Lengths: 1.5m, 2m, 2.5m, 3m, 3.5m, 5m What's in the box: 1 pair (2×) 5N OCC HiFi Speaker Cable Banana Plug-Y Plug (selected length)

  Read more less

  $57.99 - $99.99

  View options

• 

  View options

  Xangsane Xangsane 5N OCC USB Audio Cable for DAC – Multi-Connector

  Xangsane HiFi 5N OCC USB OTG Cable Type C to USB B — premium audiophile-grade USB OTG cable featuring 5N OCC (single crystal copper) conductors, designed for high-fidelity digital audio data transmission between Type-C devices (phones, tablets, laptops) and USB B DACs, decoders, sound cards, and audio equipment. Shielding design for noise-free signal transfer. Ideal for OTG audio decoding with mobile devices. Key Features: 5N OCC (single crystal copper) conductors for superior digital audio signal transmission with minimal loss Type C (male) to USB B (male) connectors for OTG audio decoding with mobile devices Shielding design effectively reduces electromagnetic interference, ensuring clean and stable audio signal delivery Ideal for connecting Type-C phones, tablets, laptops to DACs, decoders, sound cards, mixers, and HiFi audio systems Supports high-resolution audio transmission for enhanced sound performance Available in 6 lengths: 0.5m, 0.75m, 1m, 1.5m, 2m, 3m Specifications: Conductor: 5N OCC (single crystal copper) Connector: Type C (male) to USB B (male) Shielding: Shielded design Application: HiFi USB OTG cable, DAC, decoder, sound card, mixer, audio interface, Type-C device Lengths: 0.5m, 0.75m, 1m, 1.5m, 2m, 3m What's in the box: 1× Xangsane HiFi 5N OCC USB OTG Cable Type C to USB B (selected length)

  Read more less

  $34.99 - $79.99

  View options

• 

  View options

  Xangsane Xangsane 5N Sterling Silver USB-A to USB-B DAC Cable

  Xangsane HiFi 5N Sterling Silver USB A to B Decoding Cable — premium audiophile-grade USB cable featuring 5N sterling silver conductors with 4×0.4mm² configuration, designed for high-fidelity digital audio data transmission between computers, DACs, decoders, sound cards, and audio equipment. USB A male to USB B male connectors with foil shielding for effective noise reduction. Model XS-025. Key Features: 5N sterling silver conductors for superior audio clarity and reduced signal loss 4×0.4mm² conductor configuration for optimal signal transfer USB A (male) to USB B (male) connectors for universal compatibility with DACs, decoders, and sound cards Foil shielding effectively minimizes electromagnetic interference, ensuring clean and stable audio signal delivery Ideal for connecting computers, DVD players, iPods, TV boxes to external DACs or sound systems Supports high-resolution audio transmission for enhanced sound performance Available in 5 lengths: 0.5m, 1m, 1.5m, 2m, 3m Specifications: Conductor: 5N sterling silver, 4×0.4mm² Connector: USB A (male) to USB B (male) Shielding: Foil shielding Model: XS-025 Application: HiFi USB decoding cable, DAC, sound card, decoder, computer, data cable Lengths: 0.5m, 1m, 1.5m, 2m, 3m What's in the box: 1× Xangsane HiFi 5N Sterling Silver USB A to B Decoding Cable (selected length)

  Read more less

  $181.99 - $542.99

  View options

• 

  View options

  Xangsane Xangsane 6N OCC 75Ω RCA Coaxial Digital Cable

  Xangsane 6N OCC HiFi Coaxial Audio Cable — premium audiophile-grade coaxial RCA cable featuring 6N OCC (Ohno Continuous Casting) copper conductors with gold-plated RCA plugs, designed for high-fidelity digital audio signal transmission at precise 75 Ω impedance. Ideal for SPDIF digital decoding, TV, amplifier, DAC, and audio system connections. Key Features: 6N OCC copper conductors for superior audio signal transmission with minimal loss and distortion Gold-plated RCA plugs for excellent conductivity, corrosion resistance, and secure connection Precise 75 Ω impedance for stable digital signal transfer, ideal for SPDIF digital decoding Advanced braided shielding effectively blocks electromagnetic interference, ensuring clean and reliable audio output Ideal for connecting amplifiers, DVD players, TV, DAC, decoders, and HiFi audio systems Available in 6 lengths: 0.5m, 1m, 1.5m, 2m, 3m, 5m Specifications: Conductor: 6N OCC copper Connector: Gold-plated RCA (male to male) Impedance: 75 Ω Shielding: Braided shielding Application: HiFi coaxial audio cable, SPDIF digital decoding, TV, amplifier, DAC, decoder Lengths: 0.5m, 1m, 1.5m, 2m, 3m, 5m What's in the box: 1× Xangsane 6N OCC HiFi Coaxial Audio Cable Gold-Plated 75Ω RCA (selected length)

  Read more less

  $101.99 - $421.99

  View options

• 

  View options

  Xangsane Xangsane 6N OCC XLR Balanced Interconnect – Pair

  Xangsane 6N Frozen Single Crystal Copper XLR Balanced Cable — premium audiophile-grade balanced XLR interconnect cable featuring 6N frozen single crystal copper (OCC) conductors with gold-plated XLR connectors, designed for high-fidelity balanced audio signal transmission between amplifiers, preamps, DACs, CD players, streamers, and professional audio equipment. One pair (2 cables) for stereo left/right channel configuration. Key Features: 6N frozen single crystal copper (OCC) conductors for superior balanced signal transmission with minimal loss and distortion Gold-plated XLR connectors for excellent conductivity, corrosion resistance, and long-term durability Professional-grade balanced interface design reduces noise and interference One pair (2 cables) for stereo left/right channel configuration Ideal for connecting amplifiers, preamps, DACs, CD players, streamers, and professional audio equipment Available in 4 lengths: 0.5m, 1m, 1.5m, 2m Specifications: Conductor: 6N frozen single crystal copper (OCC) Connector: XLR (gold-plated, balanced) Configuration: One pair (2 cables, stereo) Application: HiFi XLR balanced cable, amplifier, preamp, DAC, CD player, streamer, professional audio Lengths: 0.5m, 1m, 1.5m, 2m What's in the box: 1 pair (2×) Xangsane 6N Frozen Single Crystal Copper XLR Balanced Cable (selected length)

  Read more less

  $137.99 - $248.99

  View options

---

Show more products