{"product_id":"fiio-sr11","title":"FiiO SR11","description":"\u003cp\u003eThe FiiO SR11 is a compact digital streaming transport that adds network playback to an existing DAC, integrated amplifier or active speaker system with a compatible digital input. It receives music over Ethernet, Wi-Fi, AirPlay, Roon, Bluetooth or local USB storage, then sends a digital signal through USB, optical or coaxial output.\u003c\/p\u003e\n\u003cp\u003eThe SR11 does not contain an analog DAC stage, headphone amplifier or speaker amplifier. Its purpose is to preserve your existing audio system while adding convenient streaming control and high-resolution digital transport capability.\u003c\/p\u003e\n\u003ch2\u003eWhy it stands out\u003c\/h2\u003e\n\u003ch3\u003eRoon Ready and AirPlay in one compact transport\u003c\/h3\u003e\n\u003cp\u003eUse dedicated Roon Ready or AirPlay modes, or select MIX mode so the SR11 can remain available to either ecosystem without repeatedly changing the operating mode.\u003c\/p\u003e\n\u003ch3\u003eUSB, optical and coaxial digital outputs\u003c\/h3\u003e\n\u003cp\u003eConnect modern USB DACs through USB-A or USB-C, or use optical and coaxial S\/PDIF with traditional DACs, amplifiers and active speakers.\u003c\/p\u003e\n\u003ch3\u003eGigabit Ethernet and dual-band Wi-Fi\u003c\/h3\u003e\n\u003cp\u003eA 1000Mbps Ethernet port supports stable wired streaming, while 2.4GHz and 5GHz Wi-Fi provide flexible placement when a network cable is impractical.\u003c\/p\u003e\n\u003ch3\u003eUseful front-panel control and included remote\u003c\/h3\u003e\n\u003cp\u003eThe LCD shows operating mode, output, network status, volume and sample-rate information, while the supplied infrared remote controls key functions from the listening position.\u003c\/p\u003e\n\u003ch2\u003eBest for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdding Roon Ready or AirPlay streaming to an existing external DAC\u003c\/li\u003e\n\u003cli\u003eHi-Fi systems that already provide optical, coaxial or USB digital input\u003c\/li\u003e\n\u003cli\u003eListeners who prefer a dedicated network transport instead of using a computer\u003c\/li\u003e\n\u003cli\u003eCompact desktop or two-channel systems that benefit from Ethernet and Wi-Fi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNot ideal for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUsers who need analog RCA or XLR outputs\u003c\/li\u003e\n\u003cli\u003eAnyone expecting to connect headphones or passive speakers directly\u003c\/li\u003e\n\u003cli\u003eBuyers who need Spotify Connect, TIDAL Connect or Chromecast as a guaranteed native endpoint\u003c\/li\u003e\n\u003cli\u003eAirPlay users expecting native high-resolution output above 44.1kHz\/16-bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/7422\/8829\/files\/FiiO_SR11_-Product_Overview.webp?v=1788238912\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/7422\/8829\/files\/FiiO_SR11_-Key_Features.webp?v=1788238912\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/7422\/8829\/files\/FiiO_SR11_-connectivity.webp?v=1788238910\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/7422\/8829\/files\/FiiO_SR11_-Core_Technology.webp?v=1788238912\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/7422\/8829\/files\/FiiO_SR11_-Real-World_Setup.webp?v=1788238912\" alt=\"\"\u003eEMiUZEK Buying Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe SR11 is a digital transport only. Your system must include a separate DAC or a component with a compatible USB, optical or coaxial digital input.\u003c\/li\u003e\n\u003cli\u003eUpdate the unit to current firmware before setup. Firmware V630 adds Bluetooth Receive, local USB playback, DLNA, FiiO Link and OTA functions; some features are unavailable on older firmware.\u003c\/li\u003e\n\u003cli\u003eUSB and S\/PDIF output cannot operate at the same time. In S\/PDIF mode, optical and coaxial output operate simultaneously; the USB-A and USB-C audio outputs also cannot feed two DACs simultaneously.\u003c\/li\u003e\n\u003cli\u003eAirPlay converts incoming audio to 44.1kHz\/16-bit. Choose Roon over USB when the connected DAC and source library require the SR11's highest supported resolution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the FiiO SR11 contain a DAC?\u003c\/h3\u003e\n\u003cp\u003eNo. The SR11 outputs digital audio only. Connect it to an external DAC, an amplifier with a digital input or active speakers with compatible digital decoding.\u003c\/p\u003e\n\u003ch3\u003eCan I connect headphones directly?\u003c\/h3\u003e\n\u003cp\u003eNo. It has no headphone output or headphone amplifier. A separate DAC\/headphone amplifier is required.\u003c\/p\u003e\n\u003ch3\u003eCan it connect directly to passive speakers?\u003c\/h3\u003e\n\u003cp\u003eNo. Passive speakers require an amplifier. The SR11 should feed a DAC or an amplifier that accepts one of its digital outputs.\u003c\/p\u003e\n\u003ch3\u003eDoes it support Roon Ready?\u003c\/h3\u003e\n\u003cp\u003eYes. In Roon mode, the SR11 appears as a Roon Ready endpoint on the same network. Roon over USB supports up to PCM 768kHz\/32-bit and DSD256 DoP when the connected DAC supports those formats.\u003c\/p\u003e\n\u003ch3\u003eWhat is MIX mode?\u003c\/h3\u003e\n\u003cp\u003eMIX mode keeps both Roon Ready and AirPlay reception available. They cannot play simultaneously; only one sending device can use the SR11 at a time.\u003c\/p\u003e\n\u003ch3\u003eDoes AirPlay provide high-resolution output?\u003c\/h3\u003e\n\u003cp\u003eNo. FiiO specifies that PCM, DSD and MQA sources received through AirPlay are converted to 44.1kHz\/16-bit before output.\u003c\/p\u003e\n\u003ch3\u003eDoes the SR11 support AirPlay 2?\u003c\/h3\u003e\n\u003cp\u003eFiiO documents the feature as AirPlay rather than guaranteeing AirPlay 2. Treat it as an AirPlay receiver and do not purchase it specifically for AirPlay 2 multiroom functionality.\u003c\/p\u003e\n\u003ch3\u003eDoes it support Spotify Connect, TIDAL Connect or Chromecast?\u003c\/h3\u003e\n\u003cp\u003eThese are not listed by FiiO as native SR11 endpoint modes. They may be accessible through another supported ecosystem or casting method, but should not be assumed to work as dedicated native Connect endpoints.\u003c\/p\u003e\n\u003ch3\u003eCan it receive Bluetooth audio?\u003c\/h3\u003e\n\u003cp\u003eYes, after updating to V630 firmware or later. Bluetooth Receive supports SBC, AAC and LDAC, then sends the received audio to the selected digital output.\u003c\/p\u003e\n\u003ch3\u003eCan it play music from a USB flash drive?\u003c\/h3\u003e\n\u003cp\u003eYes, with V630 firmware or later and the latest FiiO Control app. Both USB-A and USB-C data ports support storage, but two drives cannot be used at the same time.\u003c\/p\u003e\n\u003ch3\u003eWhich local file formats are supported?\u003c\/h3\u003e\n\u003cp\u003eFiiO lists AAC, AIF, AIFF, APE, M4A, DSF, DFF, FLAC, MP3, WAV and WMA. OGG and CUE splitting are not supported for local playback.\u003c\/p\u003e\n\u003ch3\u003eCan USB and coaxial output play at the same time?\u003c\/h3\u003e\n\u003cp\u003eNo. Select either USB output or S\/PDIF output. When S\/PDIF is selected, optical and coaxial outputs operate simultaneously.\u003c\/p\u003e\n\u003ch3\u003eCan USB-A and USB-C feed two DACs simultaneously?\u003c\/h3\u003e\n\u003cp\u003eNo. Both ports can connect to an external USB DAC, but only one USB audio output is active; by default, the first connected compatible device is used.\u003c\/p\u003e\n\u003ch3\u003eWhich output provides the highest resolution?\u003c\/h3\u003e\n\u003cp\u003eUSB supports the highest specified Roon rate, up to PCM 768kHz\/32-bit and DSD256 DoP. Optical and coaxial support up to PCM 192kHz\/24-bit and DSD64.\u003c\/p\u003e\n\u003ch3\u003eShould I use Ethernet or Wi-Fi?\u003c\/h3\u003e\n\u003cp\u003eBoth are supported. Gigabit Ethernet is preferable when maximum network stability is important; dual-band Wi-Fi is convenient when cabling is difficult.\u003c\/p\u003e\n\u003ch3\u003eDoes it have a battery?\u003c\/h3\u003e\n\u003cp\u003eNo. The SR11 requires continuous 5V\/2A power through its dedicated USB-C power input.\u003c\/p\u003e\n\u003ch3\u003eCan I use a different power supply?\u003c\/h3\u003e\n\u003cp\u003eUse a stable 5V\/2A USB power supply that meets FiiO's requirement. Higher-voltage fast-charging output is unnecessary because the SR11 is specified for 5V input.\u003c\/p\u003e\n\u003ch3\u003eWhy is there no sound after connection?\u003c\/h3\u003e\n\u003cp\u003eConfirm that the source and SR11 are on the same network, select the correct receiving mode, then match the SR11 output setting to the connected DAC. USB and S\/PDIF modes are selected separately.\u003c\/p\u003e\n\u003ch3\u003eHow is firmware updated?\u003c\/h3\u003e\n\u003cp\u003eFirmware can be installed from a USB flash drive through the USB-A or USB-C data port. Later firmware also supports OTA updating where available.\u003c\/p\u003e\n\u003ch2\u003eHOW TO CONNECT\u003c\/h2\u003e\n\u003ch3\u003eRoon to an external USB DAC\u003c\/h3\u003e\n\u003cp\u003eSource icon: Roon server\u003cbr\u003eSource: Roon Core \/ local library \/ supported Roon streaming service\u003cbr\u003eConnection: Gigabit Ethernet \/ 2.4GHz or 5GHz Wi-Fi\u003cbr\u003eOutput connection: USB-A or USB-C digital output\u003cbr\u003eTarget icon: DAC\u003cbr\u003eOutput: External USB DAC, DAC\/headphone amplifier or compatible integrated amplifier\u003c\/p\u003e\n\u003cp\u003eNote: Select Roon or MIX mode and USB output. The maximum usable format is limited by both the SR11 and the connected DAC.\u003c\/p\u003e\n\u003ch3\u003eApple device to an optical or coaxial DAC\u003c\/h3\u003e\n\u003cp\u003eSource icon: Apple device\u003cbr\u003eSource: iPhone \/ iPad \/ Mac\u003cbr\u003eConnection: AirPlay over the same network\u003cbr\u003eOutput connection: Optical or coaxial S\/PDIF\u003cbr\u003eTarget icon: DAC\u003cbr\u003eOutput: External DAC, amplifier or active speakers with digital input\u003c\/p\u003e\n\u003cp\u003eNote: Select AirPlay or MIX mode and S\/PDIF output. AirPlay audio is converted to 44.1kHz\/16-bit.\u003c\/p\u003e\n\u003ch3\u003eBluetooth source to an existing Hi-Fi system\u003c\/h3\u003e\n\u003cp\u003eSource icon: Phone\u003cbr\u003eSource: Smartphone \/ tablet \/ Bluetooth transmitter\u003cbr\u003eConnection: Bluetooth Receive\u003cbr\u003eOutput connection: USB, optical or coaxial digital output\u003cbr\u003eTarget icon: Audio system\u003cbr\u003eOutput: External DAC or amplifier with digital input\u003c\/p\u003e\n\u003cp\u003eNote: Update to V630 firmware or later, select Bluetooth mode and match the SR11 output setting to the connected component.\u003c\/p\u003e\n\u003ch3\u003eUSB storage to a DAC\u003c\/h3\u003e\n\u003cp\u003eSource icon: USB storage\u003cbr\u003eSource: USB flash drive with supported music files\u003cbr\u003eConnection: USB-A or USB-C data port\u003cbr\u003eOutput connection: Remaining compatible USB output or optical\/coaxial S\/PDIF\u003cbr\u003eTarget icon: DAC\u003cbr\u003eOutput: External DAC or digital-input audio system\u003c\/p\u003e\n\u003cp\u003eNote: Local playback requires current firmware and the latest FiiO Control app. Only one USB storage device can be used at a time, and port availability depends on the chosen storage and output connection.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eNetwork digital audio transport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessor \/ Wi-Fi module\u003c\/td\u003e\n\u003ctd\u003eIngenic X2000 \/ AP6256\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore network modes\u003c\/td\u003e\n\u003ctd\u003eMIX, Roon Ready, AirPlay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional functions\u003c\/td\u003e\n\u003ctd\u003eBluetooth Receive, local USB playback, DLNA, FiiO Link and OTA with V630 firmware or later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoon maximum via USB\u003c\/td\u003e\n\u003ctd\u003ePCM 768kHz\/32-bit; DSD256 DoP, subject to connected DAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptical \/ coaxial maximum\u003c\/td\u003e\n\u003ctd\u003ePCM 192kHz\/24-bit; DSD64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirPlay receiving output\u003c\/td\u003e\n\u003ctd\u003eConverted to 44.1kHz\/16-bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital outputs\u003c\/td\u003e\n\u003ctd\u003eUSB-A, USB-C, optical and coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork\u003c\/td\u003e\n\u003ctd\u003e1000Mbps Ethernet; 2.4GHz\/5GHz Wi-Fi 802.11 b\/g\/n\/ac\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBluetooth Receive codecs\u003c\/td\u003e\n\u003ctd\u003eSBC, AAC, LDAC with supported firmware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eLCD with mode, network, volume and output information\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eFront encoder knob and included infrared remote\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware update\u003c\/td\u003e\n\u003ctd\u003eUSB flash drive through USB-A or USB-C; OTA with supported firmware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower requirement\u003c\/td\u003e\n\u003ctd\u003eDC 5V\/2A through dedicated USB-C power input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eApprox. 157 × 133 × 32.3mm including feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 375g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColors\u003c\/td\u003e\n\u003ctd\u003eBlack \/ Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat's in the box, manuals and downloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFiiO SR11 ×1\u003c\/li\u003e\n\u003cli\u003e5V\/2A Power Adapter ×1\u003c\/li\u003e\n\u003cli\u003eInfrared Remote Control ×1\u003c\/li\u003e\n\u003cli\u003eUSB Cable ×1\u003c\/li\u003e\n\u003cli\u003eQuick Start Guide ×1\u003c\/li\u003e\n\u003cli\u003eWarranty Card ×1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/emiuzek.com\/pages\/download\"\u003eVisit the EMiUZEK download center.\u003c\/a\u003e\u003c\/p\u003e","brand":"Fiio","offers":[{"title":"Black","offer_id":43678346051677,"sku":"FiiO-SR11-Black","price":562.0,"currency_code":"BRL","in_stock":false},{"title":"Silver","offer_id":43678346084445,"sku":"FiiO-SR11-Silver","price":608.0,"currency_code":"BRL","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/7422\/8829\/files\/FiiO_SR11.webp?v=1784606589","url":"https:\/\/emiuzek.com\/pt-br\/products\/fiio-sr11","provider":"EMiUZEK","version":"1.0","type":"link"}